From: Marco Felsch <m.felsch@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 09/29] ARM: i.MX: convert i.MX8M to helper
Date: Tue, 17 Oct 2023 16:51:11 +0200 [thread overview]
Message-ID: <20231017145131.3069283-10-m.felsch@pengutronix.de> (raw)
In-Reply-To: <20231017145131.3069283-1-m.felsch@pengutronix.de>
From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Make use of the new helper function for all .pimximg images to cleanup
the Makefile and to have possible secure-boot image builds in place.
There are 3 i.MX8MQ platforms which don't use the .pimximg. I'm not sure
if this is intended but I left these out for now.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
[m.felsch@pengutronix.de: convert all possible make targets]
[m.felsch@pengutronix.de: adapt commit message]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
Changelog:
v2:
- unchanged
- v1-link: https://lore.barebox.org/barebox/20231010143314.2031253-1-m.felsch@pengutronix.de/T/#t
images/Makefile.imx | 97 ++++++++++++---------------------------------
1 file changed, 26 insertions(+), 71 deletions(-)
diff --git a/images/Makefile.imx b/images/Makefile.imx
index 76a0f606fe35..7fc40132fc95 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -444,83 +444,38 @@ FILE_barebox-kamstrup-mx7-concentrator.img = start_kamstrup_mx7_concentrator.pbl
image-$(CONFIG_MACH_KAMSTRUP_MX7_CONCENTRATOR) += barebox-kamstrup-mx7-concentrator.img
# ----------------------- i.MX8mm based boards --------------------------
-pblb-$(CONFIG_MACH_NXP_IMX8MM_EVK) += start_nxp_imx8mm_evk
-CFG_start_nxp_imx8mm_evk.pblb.imximg = $(board)/nxp-imx8mm-evk/flash-header-imx8mm-evk.imxcfg
-FILE_barebox-nxp-imx8mm-evk.img = start_nxp_imx8mm_evk.pblb.pimximg
-image-$(CONFIG_MACH_NXP_IMX8MM_EVK) += barebox-nxp-imx8mm-evk.img
-
-pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX8MM) += start_phyboard_polis_rdk_ddr_autodetect
-CFG_start_phyboard_polis_rdk_ddr_autodetect.pblb.imximg = $(board)/phytec-som-imx8mm/flash-header-imx8mm-phyboard-polis-rdk.imxcfg
-FILE_barebox-phyboard-polis-rdk-ddr-autodetect.img = start_phyboard_polis_rdk_ddr_autodetect.pblb.pimximg
-image-$(CONFIG_MACH_PHYTEC_SOM_IMX8MM) += barebox-phyboard-polis-rdk-ddr-autodetect.img
-
-pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX8MM) += start_phyboard_polis_rdk_ddr_1g
-CFG_start_phyboard_polis_rdk_ddr_1g.pblb.imximg = $(board)/phytec-som-imx8mm/flash-header-imx8mm-phyboard-polis-rdk.imxcfg
-FILE_barebox-phyboard-polis-rdk-ddr-1g.img = start_phyboard_polis_rdk_ddr_1g.pblb.pimximg
-image-$(CONFIG_MACH_PHYTEC_SOM_IMX8MM) += barebox-phyboard-polis-rdk-ddr-1g.img
-
-pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX8MM) += start_phyboard_polis_rdk_ddr_2g
-CFG_start_phyboard_polis_rdk_ddr_2g.pblb.imximg = $(board)/phytec-som-imx8mm/flash-header-imx8mm-phyboard-polis-rdk.imxcfg
-FILE_barebox-phyboard-polis-rdk-ddr-2g.img = start_phyboard_polis_rdk_ddr_2g.pblb.pimximg
-image-$(CONFIG_MACH_PHYTEC_SOM_IMX8MM) += barebox-phyboard-polis-rdk-ddr-2g.img
-
-pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX8MM) += start_phyboard_polis_rdk_ddr_4g
-CFG_start_phyboard_polis_rdk_ddr_4g.pblb.imximg = $(board)/phytec-som-imx8mm/flash-header-imx8mm-phyboard-polis-rdk.imxcfg
-FILE_barebox-phyboard-polis-rdk-ddr-4g.img = start_phyboard_polis_rdk_ddr_4g.pblb.pimximg
-image-$(CONFIG_MACH_PHYTEC_SOM_IMX8MM) += barebox-phyboard-polis-rdk-ddr-4g.img
-
-pblb-$(CONFIG_MACH_PROTONIC_IMX8M) += start_prt_prt8mm
-CFG_start_prt_prt8mm.pblb.imximg = $(board)/protonic-imx8m/flash-header-prt8mm.imxcfg
-FILE_barebox-prt-prt8mm.img = start_prt_prt8mm.pblb.pimximg
-image-$(CONFIG_MACH_PROTONIC_IMX8M) += barebox-prt-prt8mm.img
-
-pblb-$(CONFIG_MACH_INNOCOMM_WB15) += start_innocomm_wb15_evk
-CFG_start_innocomm_wb15_evk.pblb.imximg = $(board)/innocomm-imx8mm-wb15/flash-header-imx8mm-wb15.imxcfg
-FILE_barebox-innocomm-imx8mm-wb15-evk.img = start_innocomm_wb15_evk.pblb.pimximg
-image-$(CONFIG_MACH_INNOCOMM_WB15) += barebox-innocomm-imx8mm-wb15-evk.img
+$(call build_imx8m_habv4img, CONFIG_MACH_NXP_IMX8MM_EVK, start_nxp_imx8mm_evk, nxp-imx8mm-evk/flash-header-imx8mm-evk, nxp-imx8mm-evk)
+
+$(call build_imx8m_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX8MM, start_phyboard_polis_rdk_ddr_autodetect, phytec-som-imx8mm/flash-header-imx8mm-phyboard-polis-rdk, phyboard-polis-rdk-ddr-autodetect)
+
+$(call build_imx8m_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX8MM, start_phyboard_polis_rdk_ddr_1g, phytec-som-imx8mm/flash-header-imx8mm-phyboard-polis-rdk, phyboard-polis-rdk-ddr-1g)
+
+$(call build_imx8m_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX8MM, start_phyboard_polis_rdk_ddr_2g, phytec-som-imx8mm/flash-header-imx8mm-phyboard-polis-rdk, phyboard-polis-rdk-ddr-2g)
+
+$(call build_imx8m_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX8MM, start_phyboard_polis_rdk_ddr_4g, phytec-som-imx8mm/flash-header-imx8mm-phyboard-polis-rdk, phyboard-polis-rdk-ddr-4g)
+
+$(call build_imx8m_habv4img, CONFIG_MACH_PROTONIC_IMX8M, start_prt_prt8mm, protonic-imx8m/flash-header-prt8mm, prt-prt8mm)
+
+$(call build_imx8m_habv4img, CONFIG_MACH_INNOCOMM_WB15, start_innocomm_wb15_evk, innocomm-imx8mm-wb15/flash-header-imx8mm-wb15, innocomm-imx8mm-wb15-evk)
# ----------------------- i.MX8mn based boards --------------------------
-pblb-$(CONFIG_MACH_NXP_IMX8MN_EVK) += start_nxp_imx8mn_evk
-CFG_start_nxp_imx8mn_evk.pblb.imximg = $(board)/nxp-imx8mn-evk/flash-header-imx8mn-evk.imxcfg
-FILE_barebox-nxp-imx8mn-evk.img = start_nxp_imx8mn_evk.pblb.pimximg
-image-$(CONFIG_MACH_NXP_IMX8MN_EVK) += barebox-nxp-imx8mn-evk.img
+$(call build_imx8m_habv4img, CONFIG_MACH_NXP_IMX8MN_EVK, start_nxp_imx8mn_evk, nxp-imx8mn-evk/flash-header-imx8mn-evk, nxp-imx8mn-evk)
# ----------------------- i.MX8mp based boards --------------------------
-pblb-$(CONFIG_MACH_NXP_IMX8MP_EVK) += start_nxp_imx8mp_evk
-CFG_start_nxp_imx8mp_evk.pblb.imximg = $(board)/nxp-imx8mp-evk/flash-header-imx8mp-evk.imxcfg
-FILE_barebox-nxp-imx8mp-evk.img = start_nxp_imx8mp_evk.pblb.pimximg
-image-$(CONFIG_MACH_NXP_IMX8MP_EVK) += barebox-nxp-imx8mp-evk.img
-
-pblb-$(CONFIG_MACH_SKOV_IMX8MP) += start_skov_imx8mp
-CFG_start_skov_imx8mp.pblb.imximg = $(board)/skov-imx8mp/flash-header-skov-imx8mp.imxcfg
-FILE_barebox-skov-imx8mp.img = start_skov_imx8mp.pblb.pimximg
-image-$(CONFIG_MACH_SKOV_IMX8MP) += barebox-skov-imx8mp.img
-
-pblb-$(CONFIG_MACH_TQ_MBA8MPXL) += start_tqma8mpxl
-CFG_start_tqma8mpxl.pblb.imximg = $(board)/tqma8mpxl/flash-header-tqma8mpxl.imxcfg
-FILE_barebox-tqma8mpxl.img = start_tqma8mpxl.pblb.pimximg
-image-$(CONFIG_MACH_TQ_MBA8MPXL) += barebox-tqma8mpxl.img
-
-pblb-$(CONFIG_MACH_POLYHEX_DEBIX) += start_polyhex_debix
-CFG_start_polyhex_debix.pblb.imximg = $(board)/polyhex-debix/flash-header-polyhex-debix.imxcfg
-FILE_barebox-polyhex-debix.img = start_polyhex_debix.pblb.pimximg
-image-$(CONFIG_MACH_POLYHEX_DEBIX) += barebox-polyhex-debix.img
-
-pblb-$(CONFIG_MACH_POLYHEX_DEBIX) += start_polyhex_debix_som_a_8g
-CFG_start_polyhex_debix_som_a_8g.pblb.imximg = $(board)/polyhex-debix/flash-header-polyhex-debix.imxcfg
-FILE_barebox-polyhex-debix-som-a-8g.img = start_polyhex_debix_som_a_8g.pblb.pimximg
-image-$(CONFIG_MACH_POLYHEX_DEBIX) += barebox-polyhex-debix-som-a-8g.img
-
-pblb-$(CONFIG_MACH_VARISCITE_DT8MCUSTOMBOARD_IMX8MP) += start_variscite_imx8mp_dart
-CFG_start_variscite_imx8mp_dart.pblb.imximg = $(board)/variscite-dt8mcustomboard-imx8mp/flash-header-imx8mp-dart.imxcfg
-FILE_barebox-variscite-imx8mp-dart-cb.img = start_variscite_imx8mp_dart.pblb.pimximg
-image-$(CONFIG_MACH_VARISCITE_DT8MCUSTOMBOARD_IMX8MP) += barebox-variscite-imx8mp-dart-cb.img
+$(call build_imx8m_habv4img, CONFIG_MACH_NXP_IMX8MP_EVK, start_nxp_imx8mp_evk, nxp-imx8mp-evk/flash-header-imx8mp-evk, nxp-imx8mp-evk)
+
+$(call build_imx8m_habv4img, CONFIG_MACH_SKOV_IMX8MP, start_skov_imx8mp, skov-imx8mp/flash-header-skov-imx8mp, skov-imx8mp)
+
+$(call build_imx8m_habv4img, CONFIG_MACH_TQ_MBA8MPXL, start_tqma8mpxl, tqma8mpxl/flash-header-tqma8mpxl, tqma8mpxl)
+
+$(call build_imx8m_habv4img, CONFIG_MACH_POLYHEX_DEBIX, start_polyhex_debix, polyhex-debix/flash-header-polyhex-debix, polyhex-debix)
+
+$(call build_imx8m_habv4img, CONFIG_MACH_POLYHEX_DEBIX, start_polyhex_debix_som_a_8g, polyhex-debix/flash-header-polyhex-debix, polyhex-debix-som-a-8g)
+
+$(call build_imx8m_habv4img, CONFIG_MACH_VARISCITE_DT8MCUSTOMBOARD_IMX8MP, start_variscite_imx8mp_dart, variscite-dt8mcustomboard-imx8mp/flash-header-imx8mp-dart, variscite-imx8mp-dart-cb)
# ----------------------- i.MX8mq based boards --------------------------
-pblb-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += start_nxp_imx8mq_evk
-CFG_start_nxp_imx8mq_evk.pblb.imximg = $(board)/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg
-FILE_barebox-nxp-imx8mq-evk.img = start_nxp_imx8mq_evk.pblb.pimximg
-image-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += barebox-nxp-imx8mq-evk.img
+$(call build_imx8m_habv4img, CONFIG_MACH_NXP_IMX8MQ_EVK, start_nxp_imx8mq_evk, nxp-imx8mq-evk/flash-header-imx8mq-evk, nxp-imx8mq-evk)
pblb-$(CONFIG_MACH_ZII_IMX8MQ_DEV) += start_zii_imx8mq_dev
CFG_start_zii_imx8mq_dev.pblb.imximg = $(board)/zii-imx8mq-dev/flash-header-zii-imx8mq-dev.imxcfg
--
2.39.2
next prev parent reply other threads:[~2023-10-17 14:55 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-17 14:51 [PATCH v2 00/29] i.MX8M HAB Fixes Marco Felsch
2023-10-17 14:51 ` [PATCH v2 01/29] kbuild: clean start*_*.{p,ps}imximg files Marco Felsch
2023-10-17 14:51 ` [PATCH v2 02/29] i.MX: HABv4: fix event status comparison Marco Felsch
2023-10-17 14:51 ` [PATCH v2 03/29] i.MX: HABv4: fix i.MX8MQ device lockdown Marco Felsch
2023-10-17 14:51 ` [PATCH v2 04/29] i.MX: HAB: remove unused init() hook Marco Felsch
2023-10-17 14:51 ` [PATCH v2 05/29] i.MX: HABv4: extend support to i.MX8M SoCs Marco Felsch
2023-10-17 14:51 ` [PATCH v2 06/29] i.MX: HABv4: retrieve HAB ROM version for i.MX8M Marco Felsch
2023-10-17 14:51 ` [PATCH v2 07/29] ARM: i.MX: allow HAB for i.MX8M family Marco Felsch
2023-10-17 14:51 ` [PATCH v2 08/29] ARM: i.MX: introduce build_imx8m_habv4img Marco Felsch
2023-10-17 14:51 ` Marco Felsch [this message]
2023-10-17 14:51 ` [PATCH v2 10/29] ARM: boards: i.MX8M: add HAB image support Marco Felsch
2023-10-17 14:51 ` [PATCH v2 11/29] ARM: i.MX8M: add flexspi-imx8m{m,p}-cfg.h header Marco Felsch
2023-10-17 14:51 ` [PATCH v2 12/29] ARM: boards: i.MX8M: make use of new " Marco Felsch
2023-10-17 14:51 ` [PATCH v2 13/29] ARM: lds: introduce HAB_CSF_LEN define for the hab_csf section Marco Felsch
2023-10-17 14:51 ` [PATCH v2 14/29] ARM: lds: add support for a 2nd CSF area Marco Felsch
2023-10-17 14:51 ` [PATCH v2 15/29] scripts: imx: force flexspi and hab option order Marco Felsch
2023-10-17 14:51 ` [PATCH v2 16/29] scripts: imx: move flexspi_image() into header Marco Felsch
2023-10-17 14:51 ` [PATCH v2 17/29] scripts: imx: fix i.MX8M CSF header placement Marco Felsch
2023-10-17 14:51 ` [PATCH v2 18/29] scripts: imx: add imx8m_get_offset_size helper Marco Felsch
2023-10-17 14:51 ` [PATCH v2 19/29] scripts: imx-image: header_v2: add CSF slots Marco Felsch
2023-10-17 14:51 ` [PATCH v2 20/29] scripts: imx-image: hab_sign: refactor function Marco Felsch
2023-10-17 14:51 ` [PATCH v2 21/29] scripts: imx: replace static string allocation Marco Felsch
2023-10-17 14:51 ` [PATCH v2 22/29] scripts: imx: add hab_qspi support Marco Felsch
2023-10-17 14:51 ` [PATCH v2 23/29] scripts: imx: add helper to write CSF Blocks command Marco Felsch
2023-10-17 14:51 ` [PATCH v2 24/29] scripts: imx: fix HAB for FlexSPI boot Marco Felsch
2023-10-17 14:51 ` [PATCH v2 25/29] scripts: imx-image: add missing close() Marco Felsch
2023-10-17 14:51 ` [PATCH v2 26/29] scripts: imx-image: add support for CST_EXTRA_CMDLINE_OPTIONS Marco Felsch
2023-10-17 14:51 ` [PATCH v2 27/29] ARM: i.MX: add hab qspi support if enabled Marco Felsch
2023-10-17 14:51 ` [PATCH v2 28/29] Documentation: boards: imx: replace i.MX8MQ with i.MX8M Marco Felsch
2023-10-17 14:51 ` [PATCH v2 29/29] Documentation: boards: imx: add FlexSPI sub-section Marco Felsch
2023-10-18 8:08 ` [PATCH v2 00/29] i.MX8M HAB Fixes Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231017145131.3069283-10-m.felsch@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox