mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 0/8] optee: add bidirectional communication support
Date: Mon, 27 Nov 2023 07:35:51 +0100	[thread overview]
Message-ID: <20231127063559.2205776-1-a.fatoum@pengutronix.de> (raw)

So far, barebox interaction by OP-TEE was limited to loading it and
maybe passing along its device tree fixup. In some scenarios, there
is a lot more that could need to be done however:

  - Access to eMMC RPMB memory
  - Access to keys stored in OP-TEE, e.g. in Trusted Keys TA or
    in fTPM
  - Access to hardware managed by OP-TEE via e.g. PRNG TA

Let's prepare for all that by importing the Linux v6.6 OP-TEE support
into barebox. This series has been tested on STM3MP15 and STM32MP13
32-bit ARM SoCs, where OP-TEE functioned as SCMI provider, restricting
access to some clocks, resets and regulators deemed too important to
let pesky normal world have direct access to them.

Ahmad Fatoum (5):
  driver: don't clear unrelated struct device_node::device on unregister
  deep-probe: don't panic when device can't be created
  deep-probe: skip on-demand platform dev creation for nodes without
    compatible
  devinfo: indicate if device tree nodes are differently populated
  hw_random: add implementation for OP-TEE RNG pseudo TA

Marc Kleine-Budde (3):
  include: uaccess.h: import from linux
  optee: add bidirectional communication support
  optee: add experimental support for /dev/tee0

 commands/devinfo.c                     |  13 +-
 common/Kconfig                         |   5 +
 drivers/Kconfig                        |   1 +
 drivers/Makefile                       |   2 +-
 drivers/base/driver.c                  |   7 +-
 drivers/hw_random/Kconfig              |   9 +
 drivers/hw_random/Makefile             |   1 +
 drivers/hw_random/optee-rng.c          | 302 ++++++++++
 drivers/of/platform.c                  |  13 +-
 drivers/tee/Kconfig                    |  17 +
 drivers/tee/Makefile                   |   5 +
 drivers/tee/optee/Kconfig              |  29 +
 drivers/tee/optee/Makefile             |   8 +
 drivers/tee/optee/call.c               | 239 ++++++++
 drivers/tee/optee/core.c               |  68 +++
 drivers/tee/optee/device.c             | 174 ++++++
 drivers/tee/optee/{of.c => of_fixup.c} |   0
 drivers/tee/optee/optee_msg.h          | 295 +++++++++
 drivers/tee/optee/optee_private.h      | 179 ++++++
 drivers/tee/optee/optee_smc.h          | 473 +++++++++++++++
 drivers/tee/optee/rpc.c                |  16 +
 drivers/tee/optee/smc_abi.c            | 748 +++++++++++++++++++++++
 drivers/tee/tee_core.c                 | 801 +++++++++++++++++++++++++
 drivers/tee/tee_private.h              |  50 ++
 drivers/tee/tee_shm.c                  | 338 +++++++++++
 include/asm-generic/uaccess.h          | 205 +++++++
 include/linux/mod_devicetable.h        |  10 +
 include/linux/tee_drv.h                | 418 +++++++++++++
 include/linux/uaccess.h                |  38 ++
 include/uapi/linux/tee.h               | 407 +++++++++++++
 30 files changed, 4860 insertions(+), 11 deletions(-)
 create mode 100644 drivers/hw_random/optee-rng.c
 create mode 100644 drivers/tee/Kconfig
 create mode 100644 drivers/tee/Makefile
 create mode 100644 drivers/tee/optee/Kconfig
 create mode 100644 drivers/tee/optee/Makefile
 create mode 100644 drivers/tee/optee/call.c
 create mode 100644 drivers/tee/optee/core.c
 create mode 100644 drivers/tee/optee/device.c
 rename drivers/tee/optee/{of.c => of_fixup.c} (100%)
 create mode 100644 drivers/tee/optee/optee_msg.h
 create mode 100644 drivers/tee/optee/optee_private.h
 create mode 100644 drivers/tee/optee/optee_smc.h
 create mode 100644 drivers/tee/optee/rpc.c
 create mode 100644 drivers/tee/optee/smc_abi.c
 create mode 100644 drivers/tee/tee_core.c
 create mode 100644 drivers/tee/tee_private.h
 create mode 100644 drivers/tee/tee_shm.c
 create mode 100644 include/asm-generic/uaccess.h
 create mode 100644 include/linux/tee_drv.h
 create mode 100644 include/linux/uaccess.h
 create mode 100644 include/uapi/linux/tee.h

-- 
2.39.2




             reply	other threads:[~2023-11-27  6:38 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-27  6:35 Ahmad Fatoum [this message]
2023-11-27  6:35 ` [PATCH 1/8] driver: don't clear unrelated struct device_node::device on unregister Ahmad Fatoum
2023-11-27  6:35 ` [PATCH 2/8] deep-probe: don't panic when device can't be created Ahmad Fatoum
2023-11-27  6:35 ` [PATCH 3/8] deep-probe: skip on-demand platform dev creation for nodes without compatible Ahmad Fatoum
2023-11-29  9:12   ` Sascha Hauer
2023-11-30  8:02     ` Ahmad Fatoum
2023-11-27  6:35 ` [PATCH 4/8] devinfo: indicate if device tree nodes are differently populated Ahmad Fatoum
2023-11-27  6:35 ` [PATCH 5/8] include: uaccess.h: import from linux Ahmad Fatoum
2023-11-27  6:35 ` [PATCH 6/8] optee: add bidirectional communication support Ahmad Fatoum
2023-11-27  6:35 ` [PATCH 7/8] optee: add experimental support for /dev/tee0 Ahmad Fatoum
2023-11-27  6:35 ` [PATCH 8/8] hw_random: add implementation for OP-TEE RNG pseudo TA Ahmad Fatoum
2023-12-01 10:39 ` [PATCH 0/8] optee: add bidirectional communication support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231127063559.2205776-1-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox