[PATCH v2 05/11] mci: imx-esdhc: mark the uSDHC ADMA2 descriptor quirks

[Johannes Schneider <johannes.schneider@leica-geosystems.com>]

The i.MX uSDHC ADMA2 engine cannot handle a length-0 (64 KiB) descriptor and
ignores the END attribute in a trailing NOP descriptor; large ADMA transfers
hang otherwise. Set SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC and
SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC so the shared table builder emits a safe
descriptor shape, matching Linux sdhci-esdhc-imx. esdhc_populate_sdhci() runs
for both the PBL and the proper driver, so this covers every uSDHC ADMA path.

Assisted-by: Claude Opus 4.8 (1M context)
Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
---

Notes:
    v2:
    - No functional change; rebased on next.

 drivers/mci/imx-esdhc-common.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/mci/imx-esdhc-common.c b/drivers/mci/imx-esdhc-common.c
index eb6a71915f..d31a2ad779 100644
--- a/drivers/mci/imx-esdhc-common.c
+++ b/drivers/mci/imx-esdhc-common.c
@@ -285,6 +285,14 @@ void esdhc_populate_sdhci(struct fsl_esdhc_host *host)
 		host->sdhci.read16 = esdhc_op_read16_le_tuning;
 		host->sdhci.write16 = esdhc_op_write16_le_tuning;
 	}
+
+	/*
+	 * The uSDHC ADMA2 engine mishandles a length-0 (64 KiB) descriptor and
+	 * the END attribute in a trailing NOP descriptor.
+	 */
+	if (esdhc_is_usdhc(host))
+		host->sdhci.quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
+				      SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
 }
 
 static bool esdhc_use_pio_mode(void)
-- 
2.43.0