From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 3/3] ARM: i.MX8M: define imx8mX_load_bl33 and imx8mX_load_and_start_tfa
Date: Tue, 16 Aug 2022 09:31:12 +0200 [thread overview]
Message-ID: <32cbde30-744a-a171-96b1-368db66674f6@pengutronix.de> (raw)
In-Reply-To: <20220816061443.wjjqhwqqolhaeewd@pengutronix.de>
Hello Marco,
On 16.08.22 08:14, Marco Felsch wrote:
> Hi Ahmad,
>
> On 22-08-15, Ahmad Fatoum wrote:
>> For most users imx8mX_load_and_start_tfa saves a good deal of
>> boilerplate. It's not always sufficient though:
>>
>> - board code may need a pointer to bl33 to install other firmware
>> besides barebox proper from there before jumping to bl31 (TF-A).
>>
>> - board code may want to use a different ARM Trusted Firmware,
>> e.g. when OP-TEE is to be installed.
>>
>> Thus define two more helper: imx8mX_load_bl33 and
>> imx8mn_load_and_start_tfa, which allows board code to avoid duplicating
>> the chainload logic and focus on doing the board specific stuff only.
>>
>> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
>> ---
>> arch/arm/mach-imx/atf.c | 43 ++++++++++++--------------
>> arch/arm/mach-imx/include/mach/atf.h | 12 +++++++
>> arch/arm/mach-imx/include/mach/xload.h | 4 +++
>> 3 files changed, 36 insertions(+), 23 deletions(-)
>>
>> diff --git a/arch/arm/mach-imx/atf.c b/arch/arm/mach-imx/atf.c
>> index 675e90792a32..5301c0fbe8e5 100644
>> --- a/arch/arm/mach-imx/atf.c
>> +++ b/arch/arm/mach-imx/atf.c
>> @@ -70,13 +70,10 @@ __noreturn void imx8mq_atf_load_bl31(const void *fw, size_t fw_size)
>> imx8m_atf_start_bl31(fw, fw_size, (void *)MX8MQ_ATF_BL31_BASE_ADDR);
>> }
>>
>> -__noreturn void imx8mm_load_and_start_image_via_tfa(void)
>> +void imx8mm_load_bl33(void *bl33)
>> {
>> - size_t bl31_size;
>> - const u8 *bl31;
>> enum bootsource src;
>> int instance;
>> - void *bl33 = (void *)MX8M_ATF_BL33_BASE_ADDR;
>>
>> imx8mm_get_boot_source(&src, &instance);
>> switch (src) {
>> @@ -122,16 +119,16 @@ __noreturn void imx8mm_load_and_start_image_via_tfa(void)
>> * the same code in DRAM.
>> */
>> memcpy(bl33, __image_start, barebox_pbl_size);
>> +}
>>
>> - get_builtin_firmware(imx8mm_bl31_bin, &bl31, &bl31_size);
>> -
>> - imx8mm_atf_load_bl31(bl31, bl31_size);
>> +__noreturn void imx8mm_load_and_start_image_via_tfa(void)
>> +{
>> + imx8mm_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR);
> ^
> This is already defined by your macro "imx8mm_load_and_start_tfa".
Ouch, thanks for spotting. Just fixed in v2.
>
> Regards,
> Marco
>
>> + imx8mm_load_and_start_tfa(imx8mm_bl31_bin);
>> }
>>
>> -__noreturn void imx8mp_load_and_start_image_via_tfa(void)
>> +void imx8mp_load_bl33(void *bl33)
>> {
>> - size_t bl31_size;
>> - const u8 *bl31;
>> enum bootsource src;
>> int instance;
>>
>> @@ -157,18 +154,17 @@ __noreturn void imx8mp_load_and_start_image_via_tfa(void)
>> * for the piggy data, so we need to ensure that we are running
>> * the same code in DRAM.
>> */
>> - memcpy((void *)MX8M_ATF_BL33_BASE_ADDR,
>> - __image_start, barebox_pbl_size);
>> -
>> - get_builtin_firmware(imx8mp_bl31_bin, &bl31, &bl31_size);
>> + memcpy(bl33, __image_start, barebox_pbl_size);
>> +}
>>
>> - imx8mp_atf_load_bl31(bl31, bl31_size);
>> +void imx8mp_load_and_start_image_via_tfa(void)
>> +{
>> + imx8mp_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR);
>> + imx8mp_load_and_start_tfa(imx8mp_bl31_bin);
>> }
>>
>> -__noreturn void imx8mn_load_and_start_image_via_tfa(void)
>> +void imx8mn_load_bl33(void *bl33)
>> {
>> - size_t bl31_size;
>> - const u8 *bl31;
>> enum bootsource src;
>> int instance;
>>
>> @@ -194,10 +190,11 @@ __noreturn void imx8mn_load_and_start_image_via_tfa(void)
>> * for the piggy data, so we need to ensure that we are running
>> * the same code in DRAM.
>> */
>> - memcpy((void *)MX8M_ATF_BL33_BASE_ADDR,
>> - __image_start, barebox_pbl_size);
>> -
>> - get_builtin_firmware(imx8mn_bl31_bin, &bl31, &bl31_size);
>> + memcpy(bl33, __image_start, barebox_pbl_size);
>> +}
>>
>> - imx8mn_atf_load_bl31(bl31, bl31_size);
>> +void imx8mn_load_and_start_image_via_tfa(void)
>> +{
>> + imx8mn_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR);
>> + imx8mn_load_and_start_tfa(imx8mn_bl31_bin);
>> }
>> diff --git a/arch/arm/mach-imx/include/mach/atf.h b/arch/arm/mach-imx/include/mach/atf.h
>> index ca54bb5fbf82..b3c4ecb92576 100644
>> --- a/arch/arm/mach-imx/include/mach/atf.h
>> +++ b/arch/arm/mach-imx/include/mach/atf.h
>> @@ -23,4 +23,16 @@ void __noreturn imx8mn_atf_load_bl31(const void *fw, size_t fw_size);
>> void __noreturn imx8mp_atf_load_bl31(const void *fw, size_t fw_size);
>> void __noreturn imx8mq_atf_load_bl31(const void *fw, size_t fw_size);
>>
>> +#define imx8m_load_and_start_tfa(soc,fw_name) do { \
>> + size_t __bl31_size; \
>> + const u8 *__bl31; \
>> + soc##_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR); \
>> + get_builtin_firmware(fw_name, &__bl31, &__bl31_size); \
>> + soc##_atf_load_bl31(__bl31, __bl31_size); \
>> +} while (0)
>> +
>> +#define imx8mm_load_and_start_tfa(fw_name) imx8m_load_and_start_tfa(imx8mm, fw_name)
>> +#define imx8mn_load_and_start_tfa(fw_name) imx8m_load_and_start_tfa(imx8mn, fw_name)
>> +#define imx8mp_load_and_start_tfa(fw_name) imx8m_load_and_start_tfa(imx8mp, fw_name)
>> +
>> #endif
>> diff --git a/arch/arm/mach-imx/include/mach/xload.h b/arch/arm/mach-imx/include/mach/xload.h
>> index fe43d2502632..82bf663c4266 100644
>> --- a/arch/arm/mach-imx/include/mach/xload.h
>> +++ b/arch/arm/mach-imx/include/mach/xload.h
>> @@ -16,6 +16,10 @@ int imx8m_esdhc_load_image(int instance, bool start);
>> int imx8mn_esdhc_load_image(int instance, bool start);
>> int imx8mp_esdhc_load_image(int instance, bool start);
>>
>> +void imx8mm_load_bl33(void *bl33);
>> +void imx8mn_load_bl33(void *bl33);
>> +void imx8mp_load_bl33(void *bl33);
>> +
>> void __noreturn imx8mm_load_and_start_image_via_tfa(void);
>> void __noreturn imx8mn_load_and_start_image_via_tfa(void);
>> void __noreturn imx8mp_load_and_start_image_via_tfa(void);
>> --
>> 2.30.2
>>
>>
>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
prev parent reply other threads:[~2022-08-16 7:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-15 12:55 [PATCH 1/3] ARM: i.MX8M: atf: mark ATF start functions as __noreturn Ahmad Fatoum
2022-08-15 12:55 ` [PATCH 2/3] ARM: i.MX8M: rename imx8m_atf_load_bl31 for clarity Ahmad Fatoum
2022-08-15 12:55 ` [PATCH 3/3] ARM: i.MX8M: define imx8mX_load_bl33 and imx8mX_load_and_start_tfa Ahmad Fatoum
2022-08-16 6:14 ` Marco Felsch
2022-08-16 7:31 ` Ahmad Fatoum [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=32cbde30-744a-a171-96b1-368db66674f6@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=m.felsch@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox