From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Antony Pavlov <antonynpavlov@gmail.com>, barebox@lists.infradead.org
Subject: Re: [PATCH v2 00/11] RISC-V: add LiteX SoC support; resurrect nmon
Date: Fri, 7 May 2021 12:23:47 +0200 [thread overview]
Message-ID: <331e6c41-2ced-22f0-ba69-27d0213897c9@pengutronix.de> (raw)
In-Reply-To: <20210506220834.223350-1-antonynpavlov@gmail.com>
On 07.05.21 00:08, Antony Pavlov wrote:
> Changes since v1:
>
> * rebased on top of next branch;
> * new patches are introduced:
> * clocksource: timer-riscv: select CSR from device tree
> * RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive
> * RISC-V: make it possible to build RV32I multi-image with DEBUG_LL=n
> * almost all of Ahmad's notes are fixed (e.g. unused header files inclusions are dropped);
> * NOT FIXED: gpio-74xx-mmio still uses dev_get_drvdata(), not device_get_match_data()
Why?
>
> Antony Pavlov (11):
> clocksource: timer-riscv: select CSR from device tree
> RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive
> RISC-V: make it possible to run nmon from PBL C code
> RISC-V: boards: erizo: make it possible to use nmon
> serial: add litex UART driver
> gpio: add driver for 74xx-ICs with MMIO access
> spi: add litex spiflash driver
> net: add LiteEth driver
> RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
> RISC-V: add litex_linux_defconfig
> RISC-V: make it possible to build RV32I multi-image with DEBUG_LL=n
>
> arch/riscv/Kconfig | 22 +-
> arch/riscv/Kconfig.socs | 18 +-
> arch/riscv/boards/Makefile | 1 +
> arch/riscv/boards/erizo/lowlevel.c | 5 +
> arch/riscv/boards/litex-linux/Makefile | 3 +
> arch/riscv/boards/litex-linux/lowlevel.c | 20 ++
> arch/riscv/boot/Makefile | 1 +
> arch/riscv/boot/nmon_entry.S | 13 +
> arch/riscv/configs/erizo_generic_defconfig | 1 +
> arch/riscv/configs/litex_linux_defconfig | 77 +++++
> arch/riscv/cpu/time.c | 7 +
> arch/riscv/dts/Makefile | 1 +
> arch/riscv/dts/erizo.dtsi | 2 +
> arch/riscv/dts/litex-linux.dts | 96 ++++++
> arch/riscv/dts/litex_soc_linux.dtsi | 49 +++
> arch/riscv/include/asm/debug_ll.h | 3 +
> arch/riscv/include/asm/debug_ll_litex.h | 123 +++++++
> arch/riscv/include/asm/riscv_nmon.h | 49 ++-
> arch/riscv/include/asm/timer.h | 1 +
> common/Kconfig | 4 +
> drivers/clocksource/timer-riscv.c | 19 +-
> drivers/gpio/Kconfig | 14 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-74xx-mmio.c | 166 +++++++++
> drivers/net/Kconfig | 8 +
> drivers/net/Makefile | 1 +
> drivers/net/liteeth.c | 376 +++++++++++++++++++++
> drivers/serial/Makefile | 1 +
> drivers/serial/serial_litex.c | 96 ++++++
> drivers/spi/Kconfig | 3 +
> drivers/spi/Makefile | 1 +
> drivers/spi/litex_spiflash.c | 241 +++++++++++++
> images/Makefile.riscv | 4 +
> 33 files changed, 1388 insertions(+), 39 deletions(-)
> create mode 100644 arch/riscv/boards/litex-linux/Makefile
> create mode 100644 arch/riscv/boards/litex-linux/lowlevel.c
> create mode 100644 arch/riscv/boot/nmon_entry.S
> create mode 100644 arch/riscv/configs/litex_linux_defconfig
> create mode 100644 arch/riscv/dts/litex-linux.dts
> create mode 100644 arch/riscv/dts/litex_soc_linux.dtsi
> create mode 100644 arch/riscv/include/asm/debug_ll_litex.h
> create mode 100644 drivers/gpio/gpio-74xx-mmio.c
> create mode 100644 drivers/net/liteeth.c
> create mode 100644 drivers/serial/serial_litex.c
> create mode 100644 drivers/spi/litex_spiflash.c
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-05-07 10:28 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-06 22:08 Antony Pavlov
2021-05-06 22:08 ` [PATCH v2 01/11] clocksource: timer-riscv: select CSR from device tree Antony Pavlov
2021-05-07 11:34 ` Ahmad Fatoum
2021-05-07 17:41 ` Antony Pavlov
2021-05-07 18:05 ` Ahmad Fatoum
2021-05-06 22:08 ` [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive Antony Pavlov
2021-05-07 11:42 ` Ahmad Fatoum
2021-05-07 14:25 ` Antony Pavlov
2021-05-07 14:44 ` Ahmad Fatoum
2021-05-07 17:52 ` Antony Pavlov
2021-05-07 18:08 ` Ahmad Fatoum
2021-05-07 18:36 ` Antony Pavlov
2021-05-06 22:08 ` [PATCH v2 03/11] RISC-V: make it possible to run nmon from PBL C code Antony Pavlov
2021-05-06 22:08 ` [PATCH v2 04/11] RISC-V: boards: erizo: make it possible to use nmon Antony Pavlov
2021-05-06 22:08 ` [PATCH v2 05/11] serial: add litex UART driver Antony Pavlov
2021-05-07 11:45 ` Ahmad Fatoum
2021-05-07 12:02 ` Antony Pavlov
2021-05-06 22:08 ` [PATCH v2 06/11] gpio: add driver for 74xx-ICs with MMIO access Antony Pavlov
2021-05-06 22:08 ` [PATCH v2 07/11] spi: add litex spiflash driver Antony Pavlov
2021-05-06 22:08 ` [PATCH v2 08/11] net: add LiteEth driver Antony Pavlov
2021-05-06 22:08 ` [PATCH v2 09/11] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support Antony Pavlov
2021-05-06 22:08 ` [PATCH v2 10/11] RISC-V: add litex_linux_defconfig Antony Pavlov
2021-05-06 22:08 ` [PATCH v2 11/11] RISC-V: make it possible to build RV32I multi-image with DEBUG_LL=n Antony Pavlov
2021-05-07 10:27 ` Ahmad Fatoum
2021-05-07 10:23 ` Ahmad Fatoum [this message]
2021-05-07 11:12 ` [PATCH v2 00/11] RISC-V: add LiteX SoC support; resurrect nmon Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=331e6c41-2ced-22f0-ba69-27d0213897c9@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox