mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Michael Grzeschik <m.grzeschik@pengutronix.de>,
	barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] net: phy: add uapi/linux/mdio.h from kernel for MDIO MMD access
Date: Tue, 30 Jun 2020 12:09:57 +0200	[thread overview]
Message-ID: <47637281-1409-301b-aa32-30e7a8d53b3c@pengutronix.de> (raw)
In-Reply-To: <20200630094934.18228-2-m.grzeschik@pengutronix.de>



On 6/30/20 11:49 AM, Michael Grzeschik wrote:
> The headerfile is used in the kernel for access of MDIO Managed Devices
> (MMD) indirect access. Some drivers already use those device addresses.
> We add the headerfile from the kernel and change the current users to
> use the defines instead
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ---
>  drivers/net/phy/dp83867.c |   3 +-
>  drivers/net/phy/micrel.c  |   5 +-
>  include/uapi/linux/mdio.h | 327 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 332 insertions(+), 3 deletions(-)
>  create mode 100644 include/uapi/linux/mdio.h
> 
> diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
> index b3328b7e44..6a136a76dd 100644
> --- a/drivers/net/phy/dp83867.c
> +++ b/drivers/net/phy/dp83867.c
> @@ -18,9 +18,10 @@
>  #include <linux/phy.h>
>  
>  #include <dt-bindings/net/ti-dp83867.h>
> +#include <uapi/linux/mdio.h>
>  
>  #define DP83867_PHY_ID		0x2000a231
> -#define DP83867_DEVADDR		0x1f
> +#define DP83867_DEVADDR		MDIO_MMD_VEND2
>  
>  #define MII_DP83867_PHYCTRL	0x10
>  #define MII_DP83867_MICR	0x12
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index 8f0b81d8fa..c9a19d166e 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -18,6 +18,7 @@
>  #include <linux/ethtool.h>
>  #include <linux/phy.h>
>  #include <linux/micrel_phy.h>
> +#include <uapi/linux/mdio.h>
>  
>  /* Operation Mode Strap Override */
>  #define MII_KSZPHY_OMSO				0x16
> @@ -179,7 +180,7 @@ static int ksz9031_of_load_skew_values(struct phy_device *phydev,
>  		return 0;
>  
>  	if (matches < numfields)
> -		newval = phy_read_mmd_indirect(phydev, reg, 2);
> +		newval = phy_read_mmd_indirect(phydev, reg, MDIO_MMD_WIS);
>  	else
>  		newval = 0;
>  
> @@ -193,7 +194,7 @@ static int ksz9031_of_load_skew_values(struct phy_device *phydev,
>  				<< (field_sz * i));
>  		}
>  
> -	phy_write_mmd_indirect(phydev, reg, 2, newval);
> +	phy_write_mmd_indirect(phydev, reg, MDIO_MMD_WIS, newval);
>  	return 0;
>  }
>  
> diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
> new file mode 100644
> index 0000000000..4bcb41c71b
> --- /dev/null
> +++ b/include/uapi/linux/mdio.h

I'd put mdio.h into include/linux instead. We do this for the closely
related mii.h, which in the kernel is in include/uapi/linux, but in
barebox in include/linux.

Otherwise; Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

> @@ -0,0 +1,327 @@
> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> +/*
> + * linux/mdio.h: definitions for MDIO (clause 45) transceivers
> + * Copyright 2006-2009 Solarflare Communications Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation, incorporated herein by reference.
> + */
> +
> +#ifndef _UAPI__LINUX_MDIO_H__
> +#define _UAPI__LINUX_MDIO_H__
> +
> +#include <linux/types.h>
> +#include <linux/mii.h>
> +
> +/* MDIO Manageable Devices (MMDs). */
> +#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
> +					 * Physical Medium Dependent */
> +#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
> +#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
> +#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
> +#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
> +#define MDIO_MMD_TC		6	/* Transmission Convergence */
> +#define MDIO_MMD_AN		7	/* Auto-Negotiation */
> +#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
> +#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
> +#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */
> +
> +/* Generic MDIO registers. */
> +#define MDIO_CTRL1		MII_BMCR
> +#define MDIO_STAT1		MII_BMSR
> +#define MDIO_DEVID1		MII_PHYSID1
> +#define MDIO_DEVID2		MII_PHYSID2
> +#define MDIO_SPEED		4	/* Speed ability */
> +#define MDIO_DEVS1		5	/* Devices in package */
> +#define MDIO_DEVS2		6
> +#define MDIO_CTRL2		7	/* 10G control 2 */
> +#define MDIO_STAT2		8	/* 10G status 2 */
> +#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
> +#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
> +#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
> +#define MDIO_PKGID1		14	/* Package identifier */
> +#define MDIO_PKGID2		15
> +#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
> +#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
> +#define MDIO_PCS_EEE_ABLE	20	/* EEE Capability register */
> +#define MDIO_PCS_EEE_ABLE2	21	/* EEE Capability register 2 */
> +#define MDIO_PMA_NG_EXTABLE	21	/* 2.5G/5G PMA/PMD extended ability */
> +#define MDIO_PCS_EEE_WK_ERR	22	/* EEE wake error counter */
> +#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
> +#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
> +#define MDIO_AN_EEE_LPABLE	61	/* EEE link partner ability */
> +#define MDIO_AN_EEE_ADV2	62	/* EEE advertisement 2 */
> +#define MDIO_AN_EEE_LPABLE2	63	/* EEE link partner ability 2 */
> +
> +/* Media-dependent registers. */
> +#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
> +#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
> +#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
> +					 * Lanes B-D are numbered 134-136. */
> +#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
> +#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
> +#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
> +#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
> +#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
> +#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
> +
> +/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
> +#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
> +#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
> +#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
> +#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
> +#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
> +#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */
> +
> +/* Control register 1. */
> +/* Enable extended speed selection */
> +#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
> +/* All speed selection bits */
> +#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
> +#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
> +#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
> +#define MDIO_CTRL1_RESET		BMCR_RESET
> +#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
> +#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
> +#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
> +#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
> +#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
> +#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
> +#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
> +#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
> +#define MDIO_PCS_CTRL1_CLKSTOP_EN	0x400	/* Stop the clock during LPI */
> +
> +/* 10 Gb/s */
> +#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
> +/* 10PASS-TS/2BASE-TL */
> +#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
> +/* 2.5 Gb/s */
> +#define MDIO_CTRL1_SPEED2_5G		(MDIO_CTRL1_SPEEDSELEXT | 0x18)
> +/* 5 Gb/s */
> +#define MDIO_CTRL1_SPEED5G		(MDIO_CTRL1_SPEEDSELEXT | 0x1c)
> +
> +/* Status register 1. */
> +#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
> +#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
> +#define MDIO_STAT1_FAULT		0x0080	/* Fault */
> +#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
> +#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
> +#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
> +#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
> +#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
> +#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */
> +
> +/* Speed register. */
> +#define MDIO_SPEED_10G			0x0001	/* 10G capable */
> +#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
> +#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
> +#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
> +#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
> +#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
> +#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
> +
> +/* Device present registers. */
> +#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
> +#define MDIO_DEVS_C22PRESENT		MDIO_DEVS_PRESENT(0)
> +#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
> +#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
> +#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
> +#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
> +#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
> +#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
> +#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
> +#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
> +#define MDIO_DEVS_VEND1			MDIO_DEVS_PRESENT(MDIO_MMD_VEND1)
> +#define MDIO_DEVS_VEND2			MDIO_DEVS_PRESENT(MDIO_MMD_VEND2)
> +
> +/* Control register 2. */
> +#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
> +#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
> +#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
> +#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
> +#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
> +#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
> +#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
> +#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
> +#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
> +#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
> +#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
> +#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
> +#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
> +#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
> +#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
> +#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
> +#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
> +#define MDIO_PMA_CTRL2_2_5GBT		0x0030  /* 2.5GBaseT type */
> +#define MDIO_PMA_CTRL2_5GBT		0x0031  /* 5GBaseT type */
> +#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
> +#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
> +#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
> +#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
> +#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */
> +
> +/* Status register 2. */
> +#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
> +#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
> +#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
> +#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
> +#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
> +#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
> +#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
> +#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
> +#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
> +#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
> +#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
> +#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
> +#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
> +#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
> +#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
> +#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
> +#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
> +#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
> +#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
> +#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
> +#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
> +
> +/* Transmit disable register. */
> +#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
> +#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
> +#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
> +#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
> +#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */
> +
> +/* Receive signal detect register. */
> +#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
> +#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
> +#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
> +#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
> +#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */
> +
> +/* Extended abilities register. */
> +#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
> +#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
> +#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
> +#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
> +#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
> +#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
> +#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
> +#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
> +#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
> +#define MDIO_PMA_EXTABLE_NBT		0x4000  /* 2.5/5GBASE-T ability */
> +
> +/* PHY XGXS lane state register. */
> +#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
> +#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
> +#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
> +#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
> +#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
> +
> +/* PMA 10GBASE-T pair swap & polarity */
> +#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
> +#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
> +#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
> +#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
> +#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
> +#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */
> +
> +/* PMA 10GBASE-T TX power register. */
> +#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
> +
> +/* PMA 10GBASE-T SNR registers. */
> +/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
> +#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
> +#define MDIO_PMA_10GBT_SNR_MAX		127
> +
> +/* PMA 10GBASE-R FEC ability register. */
> +#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
> +#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
> +
> +/* PCS 10GBASE-R/-T status register 1. */
> +#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
> +
> +/* PCS 10GBASE-R/-T status register 2. */
> +#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
> +#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
> +
> +/* AN 10GBASE-T control register. */
> +#define MDIO_AN_10GBT_CTRL_ADV2_5G	0x0080	/* Advertise 2.5GBASE-T */
> +#define MDIO_AN_10GBT_CTRL_ADV5G	0x0100	/* Advertise 5GBASE-T */
> +#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
> +
> +/* AN 10GBASE-T status register. */
> +#define MDIO_AN_10GBT_STAT_LP2_5G	0x0020  /* LP is 2.5GBT capable */
> +#define MDIO_AN_10GBT_STAT_LP5G		0x0040  /* LP is 5GBT capable */
> +#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
> +#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
> +#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
> +#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
> +#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
> +#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
> +#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
> +
> +/* EEE Supported/Advertisement/LP Advertisement registers.
> + *
> + * EEE capability Register (3.20), Advertisement (7.60) and
> + * Link partner ability (7.61) registers have and can use the same identical
> + * bit masks.
> + */
> +#define MDIO_AN_EEE_ADV_100TX	0x0002	/* Advertise 100TX EEE cap */
> +#define MDIO_AN_EEE_ADV_1000T	0x0004	/* Advertise 1000T EEE cap */
> +/* Note: the two defines above can be potentially used by the user-land
> + * and cannot remove them now.
> + * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
> + * using the previous ones (that can be considered obsolete).
> + */
> +#define MDIO_EEE_100TX		MDIO_AN_EEE_ADV_100TX	/* 100TX EEE cap */
> +#define MDIO_EEE_1000T		MDIO_AN_EEE_ADV_1000T	/* 1000T EEE cap */
> +#define MDIO_EEE_10GT		0x0008	/* 10GT EEE cap */
> +#define MDIO_EEE_1000KX		0x0010	/* 1000KX EEE cap */
> +#define MDIO_EEE_10GKX4		0x0020	/* 10G KX4 EEE cap */
> +#define MDIO_EEE_10GKR		0x0040	/* 10G KR EEE cap */
> +#define MDIO_EEE_40GR_FW	0x0100	/* 40G R fast wake */
> +#define MDIO_EEE_40GR_DS	0x0200	/* 40G R deep sleep */
> +#define MDIO_EEE_100GR_FW	0x1000	/* 100G R fast wake */
> +#define MDIO_EEE_100GR_DS	0x2000	/* 100G R deep sleep */
> +
> +#define MDIO_EEE_2_5GT		0x0001	/* 2.5GT EEE cap */
> +#define MDIO_EEE_5GT		0x0002	/* 5GT EEE cap */
> +
> +/* 2.5G/5G Extended abilities register. */
> +#define MDIO_PMA_NG_EXTABLE_2_5GBT	0x0001	/* 2.5GBASET ability */
> +#define MDIO_PMA_NG_EXTABLE_5GBT	0x0002	/* 5GBASET ability */
> +
> +/* LASI RX_ALARM control/status registers. */
> +#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
> +#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
> +#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
> +#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
> +#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */
> +
> +/* LASI TX_ALARM control/status registers. */
> +#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
> +#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
> +#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
> +#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
> +#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
> +#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */
> +
> +/* LASI control/status registers. */
> +#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
> +#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
> +#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */
> +
> +/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
> +
> +#define MDIO_PHY_ID_C45			0x8000
> +#define MDIO_PHY_ID_PRTAD		0x03e0
> +#define MDIO_PHY_ID_DEVAD		0x001f
> +#define MDIO_PHY_ID_C45_MASK						\
> +	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
> +
> +static inline __u16 mdio_phy_id_c45(int prtad, int devad)
> +{
> +	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
> +}
> +
> +#endif /* _UAPI__LINUX_MDIO_H__ */
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2020-06-30 10:10 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-30  9:49 [PATCH 0/2] drivers: net: phy: at803x: add clk setup with dt Michael Grzeschik
2020-06-30  9:49 ` [PATCH 1/2] net: phy: add uapi/linux/mdio.h from kernel for MDIO MMD access Michael Grzeschik
2020-06-30 10:09   ` Ahmad Fatoum [this message]
2020-06-30 11:01     ` Michael Grzeschik
2020-06-30  9:49 ` [PATCH 2/2] drivers: net: phy: at803x: add phy clk setup via dts Michael Grzeschik
2020-06-30 10:15   ` Ahmad Fatoum
2020-06-30 11:01     ` Michael Grzeschik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47637281-1409-301b-aa32-30e7a8d53b3c@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=m.grzeschik@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox