[PATCH] imx: Separate framebuffer platformdata and the videomode
2010-10-19 6:54 UTC (2+ messages)
[RFC] S3C24xx: Enable only the clocks of used units
2010-10-19 1:42 UTC (2+ messages)
[PATCH] S3C24xx: Move register definitions into their user
2010-10-18 16:57 UTC
[PATCH] S3C24xx: Remove variable type size restrictions
2010-10-18 16:55 UTC
[PATCH] Add GPIO support and GPIO setup features to the S3C processors
2010-10-18 16:43 UTC
[PATCH 01/10] imx/clocksource: enable GPT1 before using it on CPUIMX25
2010-10-16 19:01 UTC (11+ messages)
` [PATCH 02/10] mx25: add MMC clock support
` [PATCH 03/10] MX25: fix IOMUX for ESDHC1 pins
` [PATCH 04/10] mci-core: add more tested SD Cards
` [PATCH 05/10] epautoconf: fix compile error
` [PATCH 06/10] eukrea_cpuimx25: update board support
` [PATCH 07/10] imx35-regs: add defines for USB and SD
` [PATCH 08/10] speed-imx35: add support for SDHC1
` [PATCH 09/10] iomux-mx35: fox IOMUX for SDHC1's pins
` [PATCH 10/10] eukrea_cpuimx35: update board support
[PATCH 1/5] [ppc/mpc5xxx] Fixed typo in cpu_init.c
2010-10-15 10:34 UTC (7+ messages)
` [PATCH 2/5] [ppc/mpc5xxx] Small text cleanups and ADDECR to output
` [PATCH 3/5] [kp-mcb2] Added board files and configs for konzeptpark mcb2
` [PATCH 4/5] [compiler] Added OPTIMIZE options to enable GCC optimizer
` [PATCH 5/5] [drivers/nor] Fixed mismatch in prototype
[PATCH] i.MX23/MCI: Make the clock calculation easier to read and correct
2010-10-14 19:38 UTC
[PATCH] eukrea_cpuimx35: update defconfig
2010-10-13 16:46 UTC
[PATCH] eukrea_cpuimx35: update board support
2010-10-13 16:45 UTC
[PATCH] unbreak bootm
2010-10-13 15:40 UTC (7+ messages)
pull-request: kp-mcb2 board files and configuration, GCC 4.5.x optimizer workaround, powerpc mach changes
2010-10-13 13:07 UTC (2+ messages)
[PATCH] eukrea_cpuimx27: update board support
2010-10-13 10:14 UTC
[PATCH v3] Add basic support from ARM Versatile/PB
2010-10-12 17:38 UTC (4+ messages)
Where to store a header file
2010-10-12 8:28 UTC
defaultv env update v2
2010-10-12 8:13 UTC (8+ messages)
` [PATCH 1/6] defaultenv: introduce CONFIG_DEFAULT_ENVIRONMENT_GENERIC to enable it
` [PATCH 2/6] commands/crc32: add compare 2 files crc
` [PATCH 3/6] defaultenv/update: merge update_rootfs and update_kernel
` [PATCH 4/6] defaultenv/update: add check crc32 options
` [PATCH 5/6] defaultenv: add xmodem support for update
` [PATCH 6/6] defaultenv: add update_barebox to update barebox easly via tftp or xmodem
` [PATCH] nhk8815: use defaultenv
Patches for -next
2010-10-12 6:51 UTC (28+ messages)
` [PATCH 01/17] i.MX27: Add support for SDHC pins
` [PATCH 02/17] mci: Add i.MX esdhc support
` [PATCH 03/17] mci: print error code on failure
` [PATCH 04/17] spi i.MX: add spi version namespace to register defines
` [PATCH 05/17] spi i.MX: redirect functions to version specific functions
` [PATCH 06/17] spi i.MX: Add i.MX51 support
` [PATCH 07/17] Move mfd drivers to drivers/mfd
` [PATCH 08/17] move include files for mfd drivers to include/mfd
` [PATCH 09/17] mfd mc13892: Add spi support
` [PATCH 10/17] mfd mc13892: support reading the revision
` [PATCH 11/17] mci: handle SD cards < 2.0 correctly
` [PATCH 12/17] mci: align write buffer if necessary
` [PATCH 13/17] defaultenv: handle disk partitions
` [PATCH 14/17] imx_serial: Add mx51 support
` [PATCH 15/17] ARM mmu: Call __mmu_cache_flush instead of hardcoded v4/v5 only function
` [PATCH 16/17] ARM i.MX: Add basic i.MX51 support
` [PATCH 17/17] ARM i.MX51: Add babbage board support
Bring together i.MX23, its MCI driver and the ChumbyOne
2010-10-11 17:05 UTC (9+ messages)
` [PATCH 1/4] Glue i.MX23 and MCI support
` [PATCH 2/4] Adapt the i.MX23 MCI driver to the v2 i.MX23 patch series
` [PATCH 3/4] Spend the ChumbyOne a persistant environment memory on MCI card
` [PATCH 4/4] Adapt the defconfig for a full blown ChumbyOne support
[PATCH v2] Add basic support from ARM Versatile/PB
2010-10-11 16:20 UTC (2+ messages)
[PATCH] Add basic support from ARM Versatile/PB
2010-10-11 15:23 UTC (7+ messages)
[PATCH] barebox-next: Avoid a Kconfig warning
2010-10-11 13:00 UTC (3+ messages)
[PATCH v2] Add the i.MX23 architecure to barebox
2010-10-11 9:11 UTC (6+ messages)
` [PATCH 1/4] Add the basic files for the i.MX23/i.MX28 familiy of CPUs
` [PATCH 2/4] Add the driver for the i.MX23 debug UART
` [PATCH 3/4] Add the i.MX23-EVK platform (WIP)
` [PATCH 4/4] Add the i.MX23 based Chumby "
[PATCH 1/5] defaultenv: introduce CONFIG_DEFAULT_ENVIRONMENT_GENERIC to enable it
2010-10-11 5:11 UTC (9+ messages)
` [PATCH 2/5] commands/crc32: add compare 2 files crc
` [PATCH 3/5] defaultenv: add xmodem support for update
` [PATCH 4/5] defaultenv: add update_barebox to update barebox easly for tftp or xmodem
` [PATCH 5/5] nhk8815: use defaultenv
(no subject)
2010-10-11 5:08 UTC (8+ messages)
` [PATCH 1/3] hush: pass context around in shell
` [PATCH 2/3] hush: fix nasty memory leak in hush
` [PATCH 3/3] hush: implement getopt builtin
` [PATCH 3/3 v2] "
[PATCH 00/13] OMAP/Beagleboard ehci support
2010-10-10 8:37 UTC (2+ messages)
[PATCH v2] Add MCI card support to barebox
2010-10-08 16:30 UTC (11+ messages)
` [PATCH 01/10] x-functions do not return in case of failure
` [PATCH 02/10] Make the disk driver less noisy
` [PATCH 03/10] Don't use a sector buffer on stack
` [PATCH 04/10] Don't try to guess the size of a disk if its size value is already given
` [PATCH 05/10] Add MCI card support to barebox
` [PATCH 06/10] Add i.MX23 MCI card support
` [PATCH 07/10] Add S3C2440 "
` [PATCH 08/10] i.MX27: Add mmc clock support in order to add an i.MX MCI driver
` [PATCH 09/10] mci: Add i.MX27/31 driver
` [PATCH 10/10] ARM pca100: Add mci support
Add the i.MX23/i.MX28 architecure
2010-10-08 13:41 UTC (6+ messages)
` [PATCH 1/4] Add the basic files for the i.MX23/i.MX28 familiy of CPUs
` [PATCH 2/4] Add the driver for the i.MX23 debug UART
` [PATCH 3/4] Add the i.MX23-EVK platform (WIP)
` [PATCH 4/4] Add the i.MX23 based Chumby "
[2nd try] Switch the i.MX27's PLL in a safe manner
2010-10-08 9:02 UTC (2+ messages)
` [PATCH] "
Switch the i.MX27's PLL in a safe manner
2010-10-08 8:56 UTC (3+ messages)
` [PATCH] "
[RFC] Add MCI card support to barebox
2010-10-07 17:51 UTC (15+ messages)
` [PATCH 1/7] x-functions do not return in case of failure
` [PATCH 2/7] Make the disk driver less noisy
` [PATCH 3/7] Don't use a sector buffer on stack
` [PATCH 4/7] Don't try to guess the size of a disk if its size value is already given
` [PATCH 5/7] Add MCI card support to barebox
` [PATCH 6/7] Add i.MX23 MCI card support
` [PATCH 7/7] Add S3C2440 "
[PATCH] MAKEALL: allow CROSS_COMPILE*=""
2010-10-07 16:38 UTC
(no subject)
2010-10-07 15:37 UTC (4+ messages)
` [PATCH 1/3] mci: rename mci_platformdata to mci_host, pass mci_host to host drivers
` [PATCH 2/3] mci: Add i.MX27/31 driver
` [PATCH 3/3] ARM pca100: Add mci support
Code "borrowed" without attribution to original authors
2010-10-07 12:45 UTC (12+ messages)
[RFC] Add MMC support to barebox
2010-10-07 12:42 UTC (6+ messages)
` [PATCH 1/3] "
` [PATCH 2/3] Add i.MX23 MCI card support
` [PATCH 3/3] Add S3C2440 "
SD/MMC driver for imx
2010-10-05 8:21 UTC (2+ messages)
Cheap online Marketing,Purchase Now
2010-10-03 18:22 UTC
[PATCH] imx: fix Internal boot source default choice
2010-10-03 2:54 UTC
v2010.10.0
2010-10-02 11:16 UTC
m68k pull request
2010-10-02 3:57 UTC
[PATCH 1/2] imx: Internal boot sources, handle all header offsets
2010-10-02 2:20 UTC (5+ messages)
[PATCH v2] MAKEALL: make it generic
2010-10-01 16:48 UTC (5+ messages)
` [PATCH v3] "
` [PATCH v4] "
Failing to load Barebox Environment
2010-10-01 11:10 UTC (6+ messages)
[PATCH] imx35: add base addresses for I2C and SDHC
2010-10-01 8:02 UTC (4+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox