[PATCH] i.MX23/STM: Continue improving this architecture
2010-11-22 12:24 UTC (6+ messages)
` [PATCH 1/6] Remove variable size restrictions in i.MX23's gpio managing routines
` [PATCH 2/6] Simplify test for the max. possible GPIO number
` [PATCH 3/6] i.MX23: Add support for the gpio commands
` [PATCH 4/6] i.MX23: Add pixel clock calculation routine for framebuffer support
` [PATCH 5/6] i.MX23: Add framebuffer device support
Just add some doc about MCI card handling
2010-11-22 11:42 UTC (2+ messages)
` [PATCH] Add some documentation "
[To test] [PATCH 0/5] device: introduce resource structure
2010-11-21 6:46 UTC (18+ messages)
` [PATCH 1/5] device: introduce resource structure to simplify resource delaration
` [PATCH 2/5] mem: add multiple resource support
` [PATCH 3/5] arm/setup_memory_tags: "
` [PATCH 4/5] edb93xx: convert to multiple mem resources
` [PATCH 5/5] pcm037: "
` [PATCH 1/2] mem: multiple resource support allow exclude a resource
` [PATCH 2/2] mem: convert to DEVFS_MEM_BAREBOX_ONLY for freescale-mx25-3-stack/pcm037/pvm038
[PATCHv3] Add dynamic video initialization to barebox
2010-11-19 12:51 UTC (12+ messages)
` [PATCH 01/11] Separate framebuffer platformdata and the videomode
` [PATCH 02/11] Add more flags for sync control
` [PATCH 03/11] Bring in dynamic videomode selection at runtime
` [PATCH 04/11] Add verbose framebuffer device info
` [PATCH 05/11] Adapt the existing imx fb driver to support runtime videomode selection
` [PATCH 06/11] Adapt the existing imx-ipu "
` [PATCH 07/11] Remove variable size restrictions
` [PATCH 08/11] Add doxygen documentation to the framebfuffer code
` [PATCH 09/11] Provide more driver specific data in a videomode
` [PATCH 10/11] Add a video driver for S3C2440 bases platforms
` [PATCH 11/11] STM378x: Add video driver for this platform
[PATCH 0/5] Various sparse fixes
2010-11-19 8:36 UTC (7+ messages)
` [PATCH 1/5] common: Add define for IOMEM helper macro
` [PATCH 2/5] fs: Fix sparse warning
` [PATCH 3/5] mtd: "
` [PATCH 4/5] nand_s3c2410: Fix sparse warnings
` [PATCH 5/5] smc91111: Various sparse fixes
sparse warnings
2010-11-18 10:22 UTC (5+ messages)
[PATCHv2] Add dynamic video initialization to barebox
2010-11-18 10:09 UTC (20+ messages)
` [PATCH 03/12] Bring in dynamic videomode selection at runtime
` [PATCH 08/12] Add a video driver for S3C2440 bases platforms
[PATCH] i.MX device macros: Fix esdhci
2010-11-18 8:17 UTC
x86 fix Pull request
2010-11-17 4:25 UTC
AT91SAM9260-EK NAND Driver error
2010-11-16 10:26 UTC (3+ messages)
[PATCH] serial_s3c24x0: Add missing brackets
2010-11-15 14:17 UTC
add i.MX51 Nand support
2010-11-15 12:08 UTC (19+ messages)
` [PATCH 01/13] NAND: reset chips before usage like the kernel does
` [PATCH 02/13] imx_nand: remove 0xe00 offset from registers
` [PATCH 03/13] imx_nand: rework get_dev_status
` [PATCH 04/13] imx nand: remove unnecessary register write
` [PATCH 05/13] imx_nand: make some internally used functions overwriteable
` [PATCH 06/13] imx nand: do not read-modify-write SPAS register
` [PATCH 07/13] imx nand: add V1_V2 namespace to registers
` [PATCH 08/13] mxc_nand: fix correct_data function
` [PATCH] "
` [PATCH 09/13] imx nand: move initialization to preset function
` [PATCH 10/13] imx nand: introduce overwritable check_int function
` [PATCH 11/13] imx nand: Add v3 (i.MX51) support
` [PATCH 12/13] fb: set id for framebuffer device correctly
` [PATCH 13/13] ARM i.MX51: Add nand device
More documentation updates
2010-11-15 9:02 UTC (4+ messages)
` [PATCH 1/3] doc: sort list alphabetically
` [PATCH 2/3] doc: add missing commands
` [PATCH 3/3] doc: put barebox version into documentation
[PATCH v3] Add basic support from ARM Versatile/PB
2010-11-14 1:37 UTC (3+ messages)
[PATCH] pcm037: Fix compilation warning
2010-11-12 13:00 UTC
[PATCH] mini2440: Fix compilation error
2010-11-12 12:50 UTC
Pull request at91
2010-11-11 12:43 UTC
BeagleBoard sdrc init writes reserved values
2010-11-11 11:55 UTC (4+ messages)
[PATCH 1/6] at91: Introduction of at91sam9261 SOC
2010-11-11 5:24 UTC (8+ messages)
` [PATCH 2/6] at91: add Ronetix pm9261 board support
` [PATCH 3/6] at91: Support for at91sam9g45 and at91sam9m10 series: core chip & "
` [PATCH 4/6] at91sam9260/at91sam9263: use the same id as in the kernel for the uart devices
` [PATCH 5/6] at91: Support for at91sam9g10: core chip & board support
` [PATCH 6/6] at91: add Ronetix pm9g45 support
[PATCH 1/6] at91: Introduction of at91sam9261 SOC
2010-11-10 11:44 UTC (2+ messages)
` [PATCH 2/6] at91: add Ronetix pm9261 board support
Garz & Fricke Cupid Support
2010-11-08 21:34 UTC (2+ messages)
BIOS like screen for uboot
2010-11-06 2:25 UTC (3+ messages)
fw_printenv | saveenv for barebox
2010-11-05 7:35 UTC (2+ messages)
how to get my patch to master or barebox dev cycle
2010-11-03 22:08 UTC (2+ messages)
[PATCH] eukrea_cpuimx35: fix flash header
2010-11-03 18:27 UTC (3+ messages)
device register functions for i.MX
2010-11-02 17:17 UTC (18+ messages)
` [PATCH 01/17] ARM i.MX51: Add SPBA0 base addresses
` [PATCH 02/17] ARM i.MX: Add device convenience functions
` [PATCH 03/17] ARM i.MX: Add header protection
` [PATCH 04/17] ARM i.MX35: Add IPU base address
` [PATCH 05/17] ARM pcm043: Use device functions
` [PATCH 06/17] ARM pca100: "
` [PATCH 07/17] ARM pcm038: "
` [PATCH 08/17] ARM pcm037: "
` [PATCH 09/17] ARM imx27ads: "
` [PATCH 10/17] ARM imx21ads: "
` [PATCH 11/17] ARM mx51 babbage: "
` [PATCH 12/17] ARM neso: "
` [PATCH 13/17] ARM mx35 3ds: "
` [PATCH 14/17] ARM mx25 "
` [PATCH 15/17] ARM eukrea cpuimx35: "
` [PATCH 16/17] ARM eukrea cpuimx27: "
` [PATCH 17/17] ARM eukrea cpuimx25: "
v2010.11.0
2010-11-02 17:04 UTC
command bootu to start kernel
2010-11-02 13:53 UTC (15+ messages)
documentation updates
2010-11-02 13:10 UTC (14+ messages)
` [PATCH 01/13] doc: remove obsolete link method for arch specification
` [PATCH 02/13] doc: unify documentation for 'loadenv'
` [PATCH 03/13] doc: remove ..., confuses doxygen
` [PATCH 04/13] doc: unify documentation for 'mount'
` [PATCH 05/13] doc: unify documentation for 'printenv'
` [PATCH 06/13] doc: unify documentation for 'protect' and 'unprotect'
` [PATCH 07/13] doc: unify documentation for 'saveenv'
` [PATCH 08/13] doc: unify documentation for 'setenv'
` [PATCH 09/13] doc: remove sh from command documentation
` [PATCH 10/13] doc: unify documentation for 'linux16'
` [PATCH 11/13] doc: put CPUIMX35 into the right chapter
` [PATCH 12/13] doc: put babage board "
` [PATCH 13/13] doc: put cupid "
[PATCH 2/3] cpuimx35: fix warning
2010-11-01 19:51 UTC (2+ messages)
` [PATCH] "
[PATCH] eukrea's boards: unify kernel partition's size
2010-11-01 19:47 UTC
[PATCH] armlinux: pass INIRTD tag to the kernel
2010-11-01 19:46 UTC
ELC-E Barebox Slides
2010-11-01 14:35 UTC
Some patches
2010-11-01 11:01 UTC (8+ messages)
` [PATCH 1/5] devinfo: use subtree only with devinfo
` [PATCH 2/5] sandbox: use devfs functions only if defined
` [PATCH 3/5] digest: align menu
` [PATCH 4/5] allno: make simple shell the default
` [PATCH 5/5] parser: use debug macros
Unified Documentation
2010-11-01 10:03 UTC (24+ messages)
` [PATCH 01/21] doc: fix typo
` [PATCH 02/21] doc: add macros to unify command help with doxygen
` [PATCH 03/21] doc: add documentation for 'bmp'
` [PATCH 04/21] doc: add documentation for 'clear'
` [PATCH 05/21] doc: add documentation for 'crc32'
` [PATCH 06/21] doc: add documentation for 'dfu'
` [PATCH 07/21] doc: unify documentation for 'ls'
` [PATCH 08/21] doc: unify documentation for 'cat'
` [PATCH 09/21] doc: unify documentation for 'cd'
` [PATCH 10/21] doc: add documentation for 'echo'
` [PATCH 11/21] doc: unify documentation for 'edit'
` [PATCH 12/21] doc: add documentation for 'bootm'
` [PATCH 13/21] doc: unify documentation for 'addpart'
` [PATCH 14/21] doc: unify documentation for 'cp'
` [PATCH 15/21] doc: unify documentation for 'delpart'
` [PATCH 16/21] doc: rework user manual
` [PATCH 17/21] doc: unify documentation for 'devinfo'
` [PATCH 18/21] doc: unify documentation for 'erase'
` [PATCH 19/21] doc: rework and unify documentation for gpio commands
` [PATCH 20/21] doc: unify documentation for 'export'
` [PATCH 21/21] doc: unify documentation for 'tftp'
[PATCH] MCI: Add some doc how to handle MCI cards
2010-10-29 19:36 UTC
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox