mail archive of the barebox mailing list
 help / color / mirror / Atom feed
[PATCH] Add gpio command support to STM/i.MX arch
 2010-12-21 11:25 UTC  (4+ messages)
` [PATCH 1/9] Fix a typo in the GPIO doc
` [PATCH 2/9] ARM STM/i.MX: Fix register offset calculation for GPIO input pins
` [PATCH 5/9] ARM STM/i.MX: Just fix the docs

my IXP4xx-related and other patches
 2010-12-21  9:34 UTC  (22+ messages)
` [PATCH 1] Delete unused file common/dlmalloc.src
` [PATCH 2] Remove unused eth_get_name() prototype
` [PATCH 3] Flash CFI: removed unused 'size' variable
` [PATCH 4] Fix help text for "loadb" and "loady" commands
` [PATCH 5] Fix error handling with malloc, memalign etc. Memalign() can't fail now
` [PATCH 6] ARM: support big/little endian switching in "bootz"
` [PATCH 7] Fix top-level Makefile to work with GNU make 3.82
` [PATCH 8] Cosmetic fixes, including format attributes for printf() and friends
` [PATCH 9] ARM: support big-endian processors
` [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform
` [PATCH 11] Silence few warnings
` [PATCH 12] Fix NOR CFI flash driver to work on big endian systems
` [PATCH 13] Fix usage of __LITTLE_ENDIAN macro

[PATCH] Add support for runtime selection of video mode in barebox
 2010-12-20 15:05 UTC  (11+ messages)
` [PATCH 01/10] Add more useful generic macros
` [PATCH 02/10] ARM Chumby: Fix memory index
` [PATCH 03/10] ARM Chumby: Fix unit of the clocks after the change to Hz
` [PATCH 04/10] ARM Chumby: Just fix some typos
` [PATCH 05/10] Fix default framebuffer 'enable' set
` [PATCH 06/10] Add the feature to change the video mode at runtime
` [PATCH 07/10] ARM STM/i.MX: Add a pixel clock calculation routine for i.MX23/i.MX28
` [PATCH 08/10] ARM STM/i.MX: Add video driver "
` [PATCH 09/10] ARM KARO-TX28-STK5: Add a user for video graphics support on i.MX28
` [PATCH 10/10] ARM Chumby-Falconwing: Add a user for video graphics support on i.MX23

nand_boot_test problem
 2010-12-20 14:45 UTC  (4+ messages)

[PATCH v2] xyzModem.c: fix 'dummy' is used uninitialized in this function warning
 2010-12-20 14:14 UTC 

[PATCH v2] LED support
 2010-12-20  9:53 UTC  (9+ messages)
` [PATCH 1/8] cfi flash driver: check for ctrl-c during erase
` [PATCH 2/8] Add generic poll infrastructure
` [PATCH 3/8] basic LED support
` [PATCH 4/8] LED: Add gpio "
` [PATCH 5/8] LED: Add LED trigger support
` [PATCH 6/8] LED: Add led command
` [PATCH 7/8] LED: Add trigger command
` [PATCH 8/8] ARM pcm043 board: Add LED support

LED framework
 2010-12-20  8:27 UTC  (21+ messages)
` [PATCH 1/7] Add generic poll infrastructure
` [PATCH 2/7] basic LED support
` [PATCH 3/7] LED: Add gpio "
` [PATCH 4/7] LED: Add LED trigger support
` [PATCH 5/7] LED: Add led command
` [PATCH 6/7] LED: Add trigger command
` [PATCH 7/7] pcm038: led testing. Not to be committed

Phytec's phyCARD-S-i.MX27
 2010-12-16 10:01 UTC 

More Documentation Patches
 2010-12-15 19:16 UTC  (36+ messages)
` [PATCH 01/34] doc: remove non-existing references
` [PATCH 02/34] doc: add documentation for 'version' command
` [PATCH 03/34] doc: add documentation for 'unlzo' command
` [PATCH 04/34] doc: add documentation for 'umount' command
` [PATCH 05/34] doc: add documentation for 'usb' command
` [PATCH 06/34] doc: add documentation for ubi commands
` [PATCH 07/34] doc: add documentation for 'timeout' command
` [PATCH 08/34] doc: add documentation for 'true' command
` [PATCH 09/34] doc: add documentation for 'sleep' command
` [PATCH 10/34] doc: add documentation for 'rm' command
` [PATCH 11/34] doc: add documentation for 'rmdir' command
` [PATCH 12/34] doc: add documentation for 'mkdir' command
` [PATCH 13/34] doc: add documentation for 'test' command
` [PATCH 14/34] doc: add documentation for 'lsmod' command
` [PATCH 15/34] doc: add documentation for 'readline' command
` [PATCH 16/34] doc: add documentation for 'insmod' command
` [PATCH 17/34] doc: add documentation for 'help' command
` [PATCH 18/34] doc: add documentation for 'pwd' command
` [PATCH 19/34] doc: add documentation for 'false' command
` [PATCH 20/34] doc: add documentation for 'exec' command
` [PATCH 21/34] doc: add documentation for 'reset' command
` [PATCH 22/34] doc: add documentation for 'reginfo' command
` [PATCH 23/34] doc: add documentation for 'meminfo' command
` [PATCH 24/34] doc: add documentation for 'go' command
` [PATCH 25/34] doc: add documentation for 'source' command
` [PATCH 26/34] doc: add documentation for 'sh' command
` [PATCH 27/34] doc: add documentation for 'ping' command
` [PATCH 28/34] doc: add documentation for 'nfs' command
` [PATCH 29/34] doc: add documentation for 'rarpboot' command
` [PATCH 30/34] doc: add documentation for 'passwd' command
` [PATCH 31/34] doc: add documentation for 'nand' command
` [PATCH 32/34] doc: add documentation for 'mw' command
` [PATCH 33/34] doc: add documentation for 'memcmp' command
` [PATCH 34/34] doc: add documentation for 'md' command

[PATCH] eth: fix 'warning: No MAC address set' when using EEPROM MAC
 2010-12-15  8:04 UTC 

loady command failure
 2010-12-14 13:20 UTC 

[PATCH] remove redundant .gitignore entries
 2010-12-13 13:10 UTC  (4+ messages)

[PATCH] i.MX28 architecture inclusion into barebox
 2010-12-13 10:53 UTC  (15+ messages)
` [PATCH 01/14] Make DIV_ROUND_UP macro globally available
` [PATCH 02/14] Add macro for correct rounding in integer devisions
` [PATCH 03/14] STM378x: Use Hz as the clock unit like in all other arch
` [PATCH 04/14] STM378x: Do not configure any pin usage in the driver
` [PATCH 05/14] STM378x: Parameterize the max. possible GPIO number
` [PATCH 06/14] STM378x: Separate i.MX23 clock handling
` [PATCH 07/14] IMX: Ignore i.MX23/i.MX28 related code in shared devices
` [PATCH 08/14] STM378x: Add i.MX28 architecture
` [PATCH 09/14] STM378x: Adapt the serial driver to support i.MX23 and i.MX28
` [PATCH 10/14] STM378x: Adapt the MCI "
` [PATCH 11/14] Fixup the FEC driver files
` [PATCH 12/14] MX28: add FEC support
` [PATCH 13/14] STM378x: Add TX28 CPU module
` [PATCH 14/14] STM378x: Add the TX28 Starterkit-5 baseboard

[PATCH] imx: add IMX_GPIO_NR macro
 2010-12-11  7:39 UTC 

[PATCH] Add basic support from ARM Versatile/PB
 2010-12-11  7:18 UTC 

[PATCH] console_simple: add fprintf / console_list for commands/loadb.c
 2010-12-10 12:50 UTC 

[PATCH] common: fix 'dummy' is used uninitialized in this function warning
 2010-12-10 10:47 UTC 

[PATCH] arm: Introduce VPR200 board
 2010-12-10  9:51 UTC  (5+ messages)

[PATCH] arm: update mach-types
 2010-12-10  8:20 UTC  (4+ messages)

Barebox on a 3730
 2010-12-06 13:35 UTC  (15+ messages)

[PATCH] STM/MCI: Fix wrong register bit
 2010-12-05 10:50 UTC  (2+ messages)

v2010.12.0
 2010-12-03 15:34 UTC 

[PATCH 0/12] cfi_flash: improvment
 2010-12-02 17:52 UTC  (16+ messages)
` [PATCH 01/12] cfi_flash: move intel real protect flash support to cfi_flash_intel.c
` [PATCH 02/12] cfi_flash: add Atmel real protect flash support
` [PATCH 03/12] cfi_flash: move flash_read_uchar from inline to noinline
` [PATCH 04/12] cfi_flash: use amd and standard reset flash command at probing
` [PATCH 05/12] cfi_flash: synchronize command offsets with Linux CFI driver
` [PATCH 06/12] cfi_flash: update manufacturer id flash support
` [PATCH 07/12] cfi_flash: Introduce read and write accessors
` [PATCH 08/12] cfi_flash: Read whole QRY structure in one go
` [PATCH 09/12] cfi_flash: do not reset flash when probe fails
` [PATCH 10/12] cfi_flash: move reset command assigment to specific chipset init function
` [PATCH 11/12] cfi_flash: introduce flash cmdset fixup
` [PATCH 12/12] cfi_flash_amd: Add manufacturer-specific fixups

[PATCH] arm: mini2440: Add memory size
 2010-12-01 10:22 UTC 

[PATCH] clocksource: import CLOCKSOURCE_MASK from the kernel
 2010-11-29 14:14 UTC  (2+ messages)
` [PATCH] clocksource: switch mask to CLOCKSOURCE_MASK

[PATCH 1/1] arm: add touchbook support
 2010-11-26 21:13 UTC  (4+ messages)

[PATCH 1/2] scripts: Add checkpatch.pl script
 2010-11-26 20:23 UTC  (2+ messages)
` [PATCH 2/2] scripts: Adapt checkpatch.pl for barebox

[PATCH 1/2] defaultenv/udpate: fix typo in default barebox image name
 2010-11-26 19:58 UTC  (2+ messages)
` [PATCH 2/2] defaultenv/udpate: in xmodem mode load the data before erasing

[PATCH] miidev: allow multiple dev
 2010-11-26 19:56 UTC 

[PATCH] phyCORE-i.MX27: Keep frequency multiplier enabled to be able to do a warmstart
 2010-11-25 16:52 UTC 

[PATCH] drivers: mci: Fix compilation warning
 2010-11-25 14:21 UTC  (4+ messages)

[PATCH resend] drivers: mci: Fix compilation warning
 2010-11-25 13:30 UTC 

RFC: change map_base type
 2010-11-25 11:23 UTC  (5+ messages)

[To test] [PATCH 0/5] device: introduce resource structure
 2010-11-23 11:34 UTC  (10+ messages)
` [PATCH 1/5] device: introduce resource structure to simplify resource delaration

page:  |  | latest

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox