[PATCH] versatile: add missing env/config
2011-01-15 2:36 UTC
[PATCH] at91sam9m10g45ek: add board revision support
2011-01-15 2:25 UTC
some i.MX28 related patches
2011-01-15 1:50 UTC (9+ messages)
` [PATCH 1/7] fec i.MX28: Make it work with MMU on
` [PATCH 2/7] ARM tx28: Add mmu support
` [PATCH 3/7] video stm/mx2x: simplify memory allocation
` [PATCH 4/7] video stm/mx2x: allow to pass in fb memory from platform data
` [PATCH 5/7] provide real barebox end variable
` [PATCH 6/7] ARM i.MX28 tx28: use a fixed framebuffer address
` [PATCH 7/7] ARM i.MX28 tx28 defconfig: enable MMU
fix framebuffer memory base address
2011-01-14 19:48 UTC (2+ messages)
` [PATCH] fb: update cdev map_base
/dev/env0 not found
2011-01-14 18:52 UTC (4+ messages)
[PATCH] arm: add __bswapsi2 support
2011-01-14 17:10 UTC
[PATCH 1/2] Thumb-2: Add macros for the unified assembler syntax
2011-01-14 15:44 UTC (2+ messages)
` [PATCH 2/2] arm: libgcc update to linux v2.6.37
[PATCH 1/1] BMP: Add support for 32bpp video frame buffer
2011-01-14 9:45 UTC (3+ messages)
Beagle XM MMC driver
2011-01-14 9:42 UTC (2+ messages)
Add basic driver for 24clxx eeproms
2011-01-14 9:39 UTC (5+ messages)
` [PATCH 1/2] i2c: add platform_data for i2c_board_info
` [PATCH 2/2] at24: add I2C eeprom for 24cl02
[PATCH] i2c-imx: sync with kernel's driver
2011-01-14 9:06 UTC (3+ messages)
Various fixes to make barebox's x86 support working again
2011-01-13 15:25 UTC (14+ messages)
` [PATCH 01/10] x86: Remove not used expressions from the makefile
` [PATCH 02/10] x86: Use the generic linker script initializing
` [PATCH 03/10] x86 ATA: Don't touch the size entry for the BIOS disk based device
` [PATCH 04/10] x86 Generic platform: Fix some typos
` [PATCH 05/10] x86 Generic platform: Fix disk drive name
` [PATCH 06/10] x86 Generic platform: Fix prompt name
` [PATCH 07/10] x86: Remove 'uboot' from file names
` [PATCH 08/10] Change 'linux16' command to use getopt()
` [PATCH 09/10] LINUX16: Add selection of the VESA video mode
` [PATCH 10/10] LINUX16: Fix warning
[PATCH 1/4] ARM STM/i.MX: Allocate memory for framebuffer during probe
2011-01-13 15:21 UTC (7+ messages)
Issues in compiling
2011-01-12 13:59 UTC (2+ messages)
[PATCH] imx(25,35): save boot location into $barebox_loc env
2011-01-12 7:04 UTC (3+ messages)
[PATCH v2] imx: Save boot source into env during init
2011-01-11 11:32 UTC (8+ messages)
` [PATCH v2 1/3] Init env context a bit earlier in initalization sequence
` [PATCH v2 2/3] imx: add reg definitions for imx25 and imx35 boot source
` [PATCH v2 3/3] imx(25,35): save boot location into $boot_loc env
` [PATCH v2 3/3] imx(25, 35): "
[PATCH] defaultenv: make 'boot' work from subdirs
2011-01-10 19:50 UTC (2+ messages)
fix printf related compiler warnings
2011-01-10 19:49 UTC (28+ messages)
` [PATCH 01/24] i.MX: fix printf "
` [PATCH 02/24] net: "
` [PATCH 03/24] fec_imx: "
` [PATCH 04/24] nand: "
` [PATCH 05/24] cdev: "
` [PATCH 06/24] usb: add missing byteorder include
` [PATCH 07/24] add to speed
` [PATCH 08/24] eukrea_cpuimx35: fix printf compiler warnings
` [PATCH 09/24] blackfin: "
` [PATCH 10/24] cs8900: "
` [PATCH 11/24] dm9000: "
` [PATCH 12/24] smc911x: "
` [PATCH 13/24] ipe337: "
` [PATCH 14/24] device tree: "
` [PATCH 15/24] netx: "
` [PATCH 16/24] guf-cupid: "
` [PATCH 17/24] pcm043: "
` [PATCH 18/24] at91: "
` [PATCH 19/24] ppc: "
` [PATCH 20/24] imx-esdhc: "
` [PATCH 21/24] mci-core: "
` [PATCH 22/24] imx-ipu-fb: "
` [PATCH 23/24] mpc5xxx: "
` [PATCH 24/24] i.MX nand: do not select NAND_IMX_BOOT
imx: Save boot source into env during init
2011-01-10 19:13 UTC (5+ messages)
` [PATCH 1/3] Init env context a bit earlier in initalization sequence
` [PATCH 2/3] imx: add reg definitions for imx25 and imx35 boot source
` [PATCH 3/3] imx(25,35): save boot location into $boot_loc env
New round of my IXP42x patches
2011-01-09 12:03 UTC (11+ messages)
` [PATCH 1/3] Fix error handling with malloc, memalign etc. Introduce xmemalign()
` [PATCH 2/3] ARM: support big/little endian switching in "bootX"
` [PATCH 3/3] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform
USB ethernet
2011-01-09 9:37 UTC (4+ messages)
[PATCH 1/7] _update_help: fix script name
2011-01-07 16:35 UTC (7+ messages)
` [PATCH 2/7] defaultenv/bin/boot: make ubi root's name configurable
` [PATCH 3/7] defaultenv/bin/update: let /env/config set default values
` [PATCH 4/7] update: add bareboxenv update possibility
` [PATCH 5/7] eukrea_cpuimx25: add led support
` [PATCH 6/7] eukrea_cpuimx25: switch to default environement
` [PATCH 7/7] eukrea_cpuimx25: update defconfig
scb9328 updates
2011-01-07 14:29 UTC (4+ messages)
` [PATCH 1/3] scb9328: remove useless bin/init file from env
` [PATCH 2/3] update scb9328_defconfig
` [PATCH 3/3] ARM scb9328: increase barebox partition size
[PATCH] omap: echi: fix compile error
2011-01-07 8:10 UTC
[PATCH 0/1] nand: fix compile warnings
2011-01-07 5:13 UTC (2+ messages)
` [PATCH 1/1] nand: Fix warnings due to incompatible format strings
8730 support
2011-01-06 11:38 UTC (2+ messages)
v2011.01.0
2011-01-06 10:35 UTC
imx: Put flash header position specific sections back in
2011-01-04 22:57 UTC (2+ messages)
` [PATCH] Put the explicit flash header "
x86 compilation broken in next branch
2011-01-04 14:58 UTC (3+ messages)
[PATCH 4/4] ARM STM/i.MX: Add the reset control of LCD
2011-01-04 14:35 UTC
[PATCH 3/4] ARM STM/i.MX: Add possibility to select the data mode for stm video driver ( DCn signal is high )
2011-01-04 14:35 UTC
[PATCH 2/4] ARM STM/i.MX: Add possibility to choose the bit per pixel for STM video driver
2011-01-04 14:35 UTC
[PATCH 0/4] ARM STM/i.MX: Bug fix and some improvements
2011-01-04 14:34 UTC
[PATCH] Add an option to set a board specific banner
2011-01-04 9:00 UTC (8+ messages)
Barebox on a 3730
2011-01-04 2:13 UTC
[PATCH 0/8] omap36x: Add basic support
2011-01-03 14:24 UTC (9+ messages)
` [PATCH 1/8] omap36x: Add support for dynamic detection
` [PATCH 2/8] omap36x: Detect silicon revisions
` [PATCH 3/8] omap36x: Define structure for PER DPLL
` [PATCH 4/8] omap36x: Add DPLL tables and functions to access them
` [PATCH 5/8] omap36x: Define per domain functions for DPLL configuration
` [PATCH 6/8] omap36x: Perform basic clock initialization
` [PATCH 7/8] omap3: Avoid sudden change to SYS_CLK divider
` [PATCH 8/8] omap3: Define GFX_DIV values for OMAP34xx and OMAP36xx
[PATCH] omap34x: Add suffix to DPLL tables and related function
2010-12-30 14:09 UTC
[PATCH 1/6] omap3: Add macros to extract hawkeye and version
2010-12-30 13:49 UTC (6+ messages)
` [PATCH 2/6] omap3: Detect cpu based on hawkeye
` [PATCH 3/6] omap3: Update method to detect si revision
` [PATCH 4/6] omap3: Add DPLL tables for silicon rev 1 and 2
` [PATCH 5/6] omap3: Define separate functions for DPLL configuration
` [PATCH 6/6] omap3: Select DPLL tables based on cpu revision
[PATCH 0/6] omap3: Support for silicon revisions
2010-12-30 13:48 UTC
4096 page NAND boot support on iMX35 PDK board
2010-12-29 21:15 UTC (7+ messages)
4096 page NAND boot support on iMX35 PDK board
2010-12-29 21:11 UTC
[PATCH] Add support for runtime selection of video mode in barebox
2010-12-29 14:55 UTC (3+ messages)
` [PATCH 08/10] ARM STM/i.MX: Add video driver for i.MX23/i.MX28
[PATCH] (reformated) Allow board specific fancy banner
2010-12-29 11:36 UTC (4+ messages)
[PATCH] Add a board specific fancy banner
2010-12-26 11:48 UTC (3+ messages)
[PATCH] Add gpio command support to STM/i.MX arch
2010-12-23 14:36 UTC (6+ messages)
Nand support on STM/i.MX (especially iMX23)
2010-12-23 13:15 UTC (3+ messages)
my IXP4xx-related and other patches
2010-12-23 11:42 UTC (16+ messages)
` [PATCH 5] Fix error handling with malloc, memalign etc. Memalign() can't fail now
` [PATCH 6] ARM: support big/little endian switching in "bootz"
` [PATCH 10] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform
Determining barebox version from linux
2010-12-23 7:07 UTC (3+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox