[PATCH v2 01/10] eukrea_cpuimx25: workaround ENGcm09152
2012-05-18 9:43 UTC (12+ messages)
` [PATCH v2 02/10] eukrea_cpuimx25: add display choice in environment
` [PATCH v2 03/10] eukrea_cpuimx35: "
` [PATCH v2 04/10] eukrea_cpuimx51: updated env
` [PATCH v2 05/10] eukrea_cpuimx25/35/51: update defconfig
` [PATCH v2 06/10] eukrea_cpuimx25&35: use switch action to launch usbserial or dfu
` [PATCH v2 07/10] iim: fix compilation when NET is not selected
` [PATCH v2 08/10] eukrea_cpuimx25: fix PHY address
` [PATCH v2 09/10] eukrea_cpuimx35: fix PHY address and clean code
` [PATCH v2 10/10] fec_imx: restart aneg at open and not at init
` [PATCH v2 xx/10]
[PATCHv3 0/7] Cleaned up version of S5PV210 code
2012-05-18 9:43 UTC (23+ messages)
` [PATCH 1/7] Make S3C24xx config options available for all S3Cs
` [PATCH 2/7] Split S3C generic and S3C24xx specific code
` [PATCHv4 0/7] S5PV210 support (upd.)
` [PATCHv4 2/7] Split S3C generic and S3C24xx specific code
` [PATCH 3/7] Add support for Samsung S5P architecture (S5PV210)
` [PATCH 4/7] S5P boot header and image generator
` [PATCHv4 5/7] S5P lowlevel clock init
` [PATCHv4 6/7] S5P DRAM support
` [PATCHv4 7/7] Add FriendlyArm Tiny210 board (S5PV210)
` [PATCH 5/7] S5P lowlevel clock init
` [PATCH 6/7] S5P DRAM support
` [PATCH 7/7] Add FriendlyArm Tiny210 board (S5PV210)
SVC32 and SP
2012-05-18 9:41 UTC (2+ messages)
[PATCH] lseek: return -1 instead of -errno
2012-05-18 9:17 UTC
build timestamps don't work
2012-05-18 8:49 UTC (6+ messages)
[PATCH 01/16] eukrea_cpuimx25: workaround ENGcm09152
2012-05-18 8:40 UTC (25+ messages)
` [PATCH 02/16] eukrea_cpuimx25: add display choice in environment
` [PATCH 03/16] eukrea_cpuimx25: update defconfig
` [PATCH 04/16] eukrea_cpuimx35: add display choice in environment
` [PATCH 05/16] eukrea_cpuimx35: update defconfig
` [PATCH 06/16] eukrea_cpuimx51: updated env
` [PATCH 07/16] eukrea_cpuimx51: update defconfig
` [PATCH 08/16] eukrea_cpuimx25: use switch action to launch usbserial or dfu
` [PATCH 09/16] eukrea_cpuimx35: "
` [PATCH 10/16] fs/tftp: depend on NET_TFTP
` [PATCH 11/16] iim: don't try to set ethaddr when NET is not selected
` [PATCH 12/16] fec_imx: restart aneg at open and not at init
` [PATCH 13/16] eukrea_cpuimx25: fix PHY address
` [PATCH 14/16] eukrea_cpuimx35: "
` [PATCH 15/16] eukrea_cpuimx25&35: update init_board
` [PATCH 16/16] eukrea_cpuimx25&35: update defconfig
[RFC v2 0/4] MIPS: add XBurst processor family support
2012-05-17 18:29 UTC (6+ messages)
` [RFC v2 1/4] "
` [RFC v2 2/4] MIPS: XBurst: add JZ4755 CPU support
` [RFC v2 3/4] MIPS: XBurst: add Ritmix RZX-50 board support
` [RFC v2 4/4] MIPS: add defconfig for Ritmix RZX-50 board
[PATCH V5 0/9] MPC85xx support
2012-05-17 16:49 UTC (10+ messages)
` [PATCH V5 1/9] Initial Freescale 85xx Headers
` [PATCH V5 2/9] Initial e500v2 start up code
` [PATCH V5 3/9] e500v2 traps and TLB support code
` [PATCH V5 4/9] 85xx: LAW and LBC initialization
` [PATCH V5 5/9] 85xx clocking support
` [PATCH V5 6/9] MPC85xx start-up support code
` [PATCH V5 7/9] Set _text_base to the firmware relocation address
` [PATCH V5 8/9] 85xx core support build files
` [PATCH V5 9/9] Minimal P2020RDB platform support and configuration file
[PATCH] PCM970: Added support for CompactFlash
2012-05-17 11:08 UTC (3+ messages)
` Re[2]: "
[PATCH 1/2] i.MX51: Changed naming registers and procedures for SPI
2012-05-17 10:14 UTC (3+ messages)
` [PATCH 2/2] i.MX51: Added helper for SDHC3 registration
[RFC] ramfs: rember last accessed chunk
2012-05-16 18:42 UTC (5+ messages)
` [PATCH] "
[PATCH] ARM i.MX51 babbage: move fec init after power init
2012-05-16 18:26 UTC
[PATCH 0/5] arch/arm: mioa701 linux booting
2012-05-16 17:22 UTC (7+ messages)
` [PATCH 1/5] arm/board: mioa701 align kernel options with kernel mtd
` [PATCH 2/5] arch/arm: mioa701 make autoboot of Linux work
` [PATCH 3/5] arch/arm: mioa701 add IPL and DPS1 updater
` [PATCH 4/5] arch/arm: mioa701 use maximum CPU frequency
` [PATCH 5/5] arch/arm: mioa701 improve barebox_update script
[PATCH 1/2] i.MX SPI: Setup SPI chipselect to inactive state while initializing device
2012-05-16 17:20 UTC (3+ messages)
` [PATCH 2/2] PCM038: Remove now unused preset for SPI chipselect
[PATCH] mfd mc13xxxx: Set mc_dev to NULL on failure
2012-05-16 10:58 UTC
[PATCH] ARM i.MX51 babbage: use dedicated chipselect for PMIC spi
2012-05-16 10:58 UTC
new default environment
2012-05-16 7:04 UTC (4+ messages)
` [PATCH 1/3] bootm: Add default images variables
` [PATCH 2/3] Add next generation default environment template
` [PATCH 3/3] ARM pcm038: Switch to new environment
[PATCH] edit: Add a status line
2012-05-16 6:51 UTC
[PATCH] dns: fix recursive loop
2012-05-16 6:50 UTC
Add magicvar description for flexible bootargs
2012-05-15 7:07 UTC (3+ messages)
` [PATCH 1/2] magicvar: Add magicvar macro with additional name argument
` [PATCH 2/2] flexible bootargs: Add magicvar descriptions
[PATCH] PCM038: Removed unnecessary call to gpio_set_value
2012-05-14 20:21 UTC (2+ messages)
[PATCH] Add glob sort support
2012-05-14 18:21 UTC (3+ messages)
` [PATCH 1/2] add qsort support
` [PATCH 2/2] glob: Add sorted output support
[PATCH] drivers/spi/spi.c: when allocating a struct device_d specify id as -1
2012-05-14 17:47 UTC (4+ messages)
` [PATCH v2] drivers/spi/spi.c: use DEVICE_ID_DYNAMIC when allocating a struct device_d
[PATCH 1/7] Support most Samsung SoCs in S3C serial driver
2012-05-14 17:46 UTC (4+ messages)
[Pull request] Minimal S5PV210 support
2012-05-14 13:38 UTC (28+ messages)
` [PATCH 0/9] "
` [PATCH 1/9] Support most Samsung SoCs in S3C serial driver
` [PATCH 2/9] Fine split S3C arch dependencies from generic code
` [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)
` [PATCH 4/9] S5PV210 iROM magic boot code
` [PATCH 5/9] S5P DRAM support
` [PATCH 6/9] S5P lowlevel clock init
` [PATCH 7/9] Revert "S5PV210 iROM magic boot code"
` [PATCH 8/9] S5P iROM boot support - improved
` [PATCH 9/9] S5P boot header and image generator
[PATCH 1/2] PCM038: Move USBH2 initialization to PCM970
2012-05-14 9:50 UTC (4+ messages)
` [PATCH 2/2] Add compressed barebox_default_env to .gitignore
[RFC 0/3] MIPS: add the initial support for lowlevel init
2012-05-14 9:13 UTC (8+ messages)
` [RFC 1/3] MIPS: move start.S code to .text_entry section
` [RFC 2/3] MIPS: add the initial support for lowlevel init
` [RFC 3/3] MIPS: malta: add bogus "
[PATCH] ohci-hcd: use dma_flush/inv_range to allow using the driver with enabled MMU
2012-05-14 8:39 UTC
[PATCH] arm: update mach-types
2012-05-14 8:31 UTC
[PATCH] global shell variables and more flexible bootargs
2012-05-14 7:24 UTC (3+ messages)
` [PATCH 1/2] add 'global' command
` [PATCH 2/2] booting: more flexible Linux bootargs generation
[PATCH 1/1] linux/types.h: define phys_size_t
2012-05-13 20:11 UTC (2+ messages)
[PATCH] echo: Fix help
2012-05-13 20:04 UTC
[PATCH] fix typo funtion -> function
2012-05-13 20:01 UTC (2+ messages)
[PATCH] Removed duplicate definition for DEVFS_PARTITION_xxx
2012-05-13 20:00 UTC (2+ messages)
[OT?] recommendation for barebox-compatible MIPS dev kit?
2012-05-13 17:29 UTC
[PATCH] ARM: put a valid "barebox" signature in the header on big-endian systems
2012-05-13 12:20 UTC (6+ messages)
[PATCH] timeout: allow to set a variable with the key pressed
2012-05-13 12:07 UTC
device parameter patches
2012-05-13 12:04 UTC (3+ messages)
` [PATCH 1/2] parameter: return empty string for unset parameters
` [PATCH 2/2] parameter: remove unused struct member
[PATCH] fs: Add NFS support
2012-05-13 10:48 UTC
[PATCH] Make errno a positive value
2012-05-13 10:47 UTC
[PATCH 1/4] PCM038: Update board description
2012-05-13 9:13 UTC (5+ messages)
` [PATCH 2/4] PCM038: Call power_init() after initializing SPI
` [PATCH 3/4] PCM038: Remove unused includes
` [PATCH 4/4] PCM038: Initial PCM970 development board support
[PATCH] defaultenv: don't overwrite in config
2012-05-13 9:05 UTC (2+ messages)
[PATCH] NOR flash: reduce size of cfiword_t if not using 64-bit bus
2012-05-13 9:03 UTC (2+ messages)
[PATCH 1/2] MIPS: add common header file for DEBUG_LL via NS16550
2012-05-13 9:02 UTC (2+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox