[PATCH 1/2] devices: fix missing converition to DEVICE_ID_DYNAMIC
2012-08-12 20:24 UTC (3+ messages)
` [PATCH 2/2] driver: set DEVICE_ID_DYNAMIC to -2 and DEVICE_ID_SINGLE to -1
[PATCH 0/4 v2] fs/mount: add autodetection support
2012-08-12 18:10 UTC (5+ messages)
` [PATCH 1/4] fs/mount: add autodetection type support
` [PATCH 2/4] filetype: add fat filesystem support
` [PATCH 3/4] fs/fat: add filetype
` [PATCH 4/4] command/mount: add autodetection support
[PATCH] ARM: enable MMU in pbl
2012-08-12 18:09 UTC (6+ messages)
` [PATCH 1/4] ARM __mmu_cache_*: Do not clobber registers
` [PATCH 2/4] ARM MMU: call __mmu_cache_* as regular C functions
` [PATCH 3/4] ARM pbl: enable MMU during decompression
` [PATCH 4/4] create a common ARM flush_icache function
[PATCH v2] pbl updates
2012-08-12 18:03 UTC (10+ messages)
` [PATCH 1/8] Makefile.lib: add disasm and ln commands
` [PATCH 2/8] Makefile: generate a barebox-flash-image link
` [PATCH 4/8] ARM s3c boards: Do not hardcode image sizes
` [PATCH 5/8] ARM boards: Make boards pbl safe
` [PATCH 6/8] ARM Makefile: Do not hardcode targets in MLO/netx/davinci/s5p
` [PATCH 7/8] ARM: fix netx/MLO/s5p image build for pbl
` [PATCH 8/8] ARM pbl: generate zbarebox.map in $(obj)
[PATCH] pbl updates
2012-08-12 13:24 UTC (19+ messages)
` [PATCH 1/9] ARM eukrea cpuimx25: Move flash_header to seperate file
` [PATCH 2/9] ARM s3c boards: Do not hardcode image sizes
` [PATCH 3/9] ARM boards: Make boards pbl safe
` [PATCH 4/9] ARM Makefile: Do not hardcode targets in MLO/netx/davinci/s5p
` [PATCH 5/9] ARM: fix netx/MLO/s5p image build for pbl
` [PATCH 6/9] ARM Makefile: generate a barebox-flash-image link
` [PATCH 7/9] ARM pbl: Fix zbarebox.S build
` [PATCH 8/9] ARM pbl: remove unnecessary FORCE
` [PATCH 9/9] ARM pbl: generate zbarebox.map in $(obj)
[PATCH 0/4] fs/mount: add autodetection support
2012-08-12 12:46 UTC (7+ messages)
` [PATCH 1/4] fs/mount: add autodetection type support
` [PATCH 2/4] filetype: add fat filesystem support
` [PATCH 3/4] fs/fat: add filetype
` [PATCH 4/4] command/mount: add autodetection support
[PATCH 0/3] ppc: Freescale TSEC driver
2012-08-10 19:16 UTC (7+ messages)
` [PATCH V2 0/4] "
` [PATCH 1/4] ppc: GIANFAR base address definition
` [PATCH 2/4] net: GIANFAR driver
` [PATCH 3/4] fsl: Freescale TSEC specific initialization
` [PATCH 4/4] ppc: P2020RDB Ethernet configuration
[PATCH 1/2] at91: sam9260/sam9g20/sam9261/sam9g10/sam9263 add autodetect sdram size
2012-08-10 18:38 UTC (4+ messages)
` [PATCH 2/2] at91: Calao and Atmel reboard sam{9260/9g20/9261/9g10/9263}ek "
[PATCH] fix hush 'exit'
2012-08-10 10:58 UTC (3+ messages)
` [PATCH 1/2] hush: Make exit a shell builtin
` [PATCH 2/2] hush: catch errors from execute_binfmt
issue with imx35 external boot from Micron 4k flash
2012-08-10 9:18 UTC (2+ messages)
[PATCH] ARM/imx/pcm043: increase size of "self" partition
2012-08-10 9:07 UTC (5+ messages)
` [PATCH v2] "
[PATCH 1/3] mc13xxx: Added mc13xxx_revision() function
2012-08-10 8:44 UTC (6+ messages)
` [PATCH 2/3] mc13xxx: Hide private struct mc13xxx from other units
` [PATCH 3/3] mc13xxx: Fixed memory leak
Video issues with PCM043
2012-08-09 20:41 UTC
[PATCH] Add JTAG bitbang driver
2012-08-09 12:59 UTC (3+ messages)
[PATCH v2] Add JTAG bitbang driver
2012-08-09 12:44 UTC
[PATCH] ARM i.MX: Add support for i2c on imx6
2012-08-09 7:35 UTC (2+ messages)
[PATCH] commands: memset: fix help message
2012-08-09 6:44 UTC (2+ messages)
[PATCH 1/1] menu: add number key support
2012-08-09 6:40 UTC (2+ messages)
Reminder: Nataraj invites you to Twoo
2012-08-08 13:20 UTC
boot init code depending on i2c eeprom value
2012-08-07 13:54 UTC (4+ messages)
` Antwort: "
[PATCH 00/12 v4] Add Pre-Bootloader support
2012-08-06 7:23 UTC (14+ messages)
` [PATCH 01/12] Makefile.clean: include Makefiles again
` [PATCH 02/12] kbuild: add pre-bootloader (pbl) target
` [PATCH 03/12] Add pre-bootloader (pbl) image support
` [PATCH 04/12] pbl: discard unwind symbol if enable in barebox
` [PATCH 05/12] Add compressed image support
` [PATCH 06/12] decompressor: import malloc/free implementation for linux 3.4
` [PATCH 07/12] ARM: add early malloc support needed by the decompressor
` [PATCH 08/12] compressed image: add gzip support
` [PATCH 09/12] ARM pbl: Add .gitignore for generated files
` [PATCH 10/12] at91: add lowlevel init to the pbl
` [PATCH 11/12] kbuild: allow to have custom cppflags for pbl
` [PATCH 12/12] arm: always enable the garbage collector "
[PATCH 0/3] omap: 4460 support
2012-08-03 16:57 UTC (6+ messages)
` [PATCH 1/3] Add support for OMAP4460 TPS62361
` [PATCH 3/3] OMAP4460: clock init
[PATCH 1/1] gadget: fix Kconfig: move config under if
2012-08-03 14:35 UTC (2+ messages)
[PATCH] Enable pull-up on Rx serial ports for the CALAO MB-QIL-A9260
2012-08-03 13:51 UTC (2+ messages)
[PATCH RFC] arm/imx: provide command to add ram device with autodetected size
2012-08-03 13:26 UTC (3+ messages)
` [PATCH v2] "
changing environment at build time
2012-08-03 13:22 UTC (4+ messages)
[PATCH 00/12 v3] Add Pre-Bootloader support
2012-08-03 7:06 UTC (24+ messages)
` [PATCH 01/12] kbuild: Init all relevant variables used in kbuild files so
` [PATCH 02/12] kbuild: add pre-bootloader (pbl) target
` [PATCH 03/12] Add pre-bootloader (pbl) image support
` [PATCH 04/12] pbl: discard unwind symbol if enable in barebox
` [PATCH 05/12] Add compressed image support
` [PATCH 06/12] only compress default env in uncompressed images
` [PATCH 07/12] decompressor: import malloc/free implementation for linux 3.4
` [PATCH 08/12] ARM: add early malloc support needed by the decompressor
` [PATCH 09/12] compressed image: add gzip support
` [PATCH 10/12] at91: add lowlevel init to the pbl
` [PATCH 11/12] kbuild: allow to have custom cppflags for pbl
` [PATCH 12/12] arm: always enable the garbage collector "
[PATCH 1/2] qsort: Fix wrong check
2012-08-03 6:30 UTC (2+ messages)
` [PATCH 2/2] glob: fix GLOB_SORT
[PATCH 0/3] AT91: Rom boot prepare
2012-08-03 5:59 UTC (4+ messages)
` [PATCH 1/3] arm: at91: add debug_ll support
` [PATCH 2/3] arm introduce CONFIG_MACH_ARM_HEAD option to allow custom head
` [PATCH 3/3] arm: at91: add custom barebox-arm-head
[PATCH] eukrea_cpuimx35: fix USB host
2012-08-02 23:05 UTC (3+ messages)
USB On PCM043?
2012-08-02 13:59 UTC (10+ messages)
` [RFC][PATCH] pcm043: usb support --not working--
[PATCH 2/3] OMAP4460: ram init changes
2012-08-02 10:55 UTC (2+ messages)
` [PATCH] OMAP4: use writel and readl
[PATCH] OMAP nand
2012-08-02 10:10 UTC (6+ messages)
` [PATCH 1/5] mtd OMAP NAND: Fix dev_ready handling
` [PATCH 2/5] ARM OMAP gpmc nand: specify platform data in boards
` [PATCH 3/5] mtd OMAP NAND: Use prefetch engine
` [PATCH 4/5] mtd nand: implement buswidth detection
` [PATCH 5/5] mtd OMAP NAND: implement buswidth autodetection support
v2012.08.0
2012-08-02 8:53 UTC
nor flash board init code
2012-08-02 8:46 UTC (12+ messages)
` Antwort: "
` "
` Antwort: "
` "
` Antwort: "
` "
` Antwort: "
at24 eeprom driver (V2) and misc patches
2012-08-01 7:25 UTC (5+ messages)
` [PATCH 7/7] drivers/eeprom: at24: add I2C eeprom driver for 24c01/02
[PATCH] mem md: make md -s /dev/something work again
2012-07-31 19:45 UTC
[PATCH] UBI work
2012-07-31 19:45 UTC (3+ messages)
` [PATCH 1/2] ubi: cdev->write has to return the bytes read, not 0
` [PATCH 2/2] ubi: align ubi writes to LEB size
[PATCH] Freescale sabrelite support
2012-07-31 18:01 UTC (5+ messages)
` [PATCH 1/4] SPI i.MX: Add support for i.MX6
` [PATCH 2/4] ARM i.MX: Add support for internal serial boot mode
` [PATCH 3/4] ARM i.MX: Add support for the Freescale i.MX6 sabrelite board
` [PATCH 4/4] ARM i.MX: Add defconfig for Freescale i.MX6 Sabre Lite board
[PATCH] m25p80 spi flash updates
2012-07-31 17:59 UTC (7+ messages)
` [PATCH 1/6] nor m25p80: remove progression bar
` [PATCH 2/6] nor m25p80: remove unused variables
` [PATCH 3/6] nor m25p80: refactor chip erase
` [PATCH 4/6] nor m25p80: align start and end to erase blocks
` [PATCH 5/6] nor m25p80: optimize erase
` [PATCH 6/6] nor m25p80: implement fast read
x86 weirdness
2012-07-31 17:07 UTC (7+ messages)
Nataraj added you as a contact on Twoo and wants to connect
2012-07-31 12:22 UTC
[ANNOUNCE] Barebox Logo
2012-07-30 19:38 UTC (7+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox