[PATCH 0/2] ARM i.MX6: Add sabrelite features
2012-08-30 12:58 UTC (3+ messages)
` [PATCH 1/2] ARM i.MX6: Add usb-ehci to sabrelite
` [PATCH 2/2] ARM i.MX6: Add i2c iomux "
[PATCH 0/3] ARM i.MX6: basic USB H1 support
2012-08-30 12:30 UTC (4+ messages)
` [PATCH 1/3] ARM i.MX6: add the usbphy1 base addr
` [PATCH 2/3] ARM i.MX6: enable usbphy1
` [PATCH 3/3] usb: use ep-specific pwrgood delay
[PATCH 0/2] trivial: correct spellings and grammar
2012-08-30 11:14 UTC (3+ messages)
` [PATCH 1/2] trivial: fix spelling in usb code
` [PATCH 2/2] trivial: bootm: correct grammar in error message
SD card experts wanted
2012-08-30 10:04 UTC (3+ messages)
[PATCH] NAND Flash SMC timings update (nwe_pulse) for calao board based on AT91SAM9G20 SoC
2012-08-30 7:06 UTC (3+ messages)
[PATCH] ppc: add unaligned support
2012-08-30 6:37 UTC (2+ messages)
[PATCH 0/3] Freescale I2C driver
2012-08-29 14:01 UTC (7+ messages)
` [PATCH 1/3] mpc85xx: i2c frequency
` [PATCH 2/3] Freescale I2C driver
` [PATCH 3/3] ppc: p2020rdb i2c support
What is TEXT_BASE?
2012-08-29 13:27 UTC (4+ messages)
[RFC] xload: get barebox size from barebox_arm_head
2012-08-29 12:21 UTC (9+ messages)
` [PATCH v2] "
` [PATCH v3] "
[PATCH 0/7 2] smsc911x: runtime configuration improvement
2012-08-29 10:07 UTC (15+ messages)
` [PATCH 1/7] smc911x: move register define to smc911x.h
` [PATCH 2/7] smc911x: introduce read/write ops
` [PATCH 3/7] smc911x: add 16bit bus width support
` [PATCH 4/7] smc911x: add support to pass the shift via platform data
` [PATCH 5/7] smc911x: improve detection handle
` [PATCH 6/7] smc911x: update chip detection
` [PATCH 7/7] smm911x: check if the device is ready before using it
[PATCH 1/1] spi: allow to dynamically allocate bus number
2012-08-29 8:25 UTC (3+ messages)
[PATCH 1/2] usb_hub_power_on: wait for the power to be stable
2012-08-29 7:10 UTC (4+ messages)
` [PATCH 2/2] stringlist: fix division by zero
[for master PATCH 1/2] miidev: add phy_addr detection support
2012-08-29 7:09 UTC (5+ messages)
` [for master PATCH 2/2] calao: at91 qil/tny/usb auto detect the phy addr
[PATCH] m25p80: wait for flash before returning after erase
2012-08-29 7:03 UTC (2+ messages)
[PATCH] i.MX35: add cspi1 support
2012-08-29 7:00 UTC (2+ messages)
[PATCH 00/18] fs: add symlink and readlink support
2012-08-29 5:23 UTC (32+ messages)
` [PATCH 01/18] fs: add "
` [PATCH 02/18] fs: rename stat to lstat as we implement lstat
` [PATCH 03/18] fs: add symlink support
` [PATCH 04/18] fs: implement stat
` [PATCH 05/18] fs: open: add symlink support
` [PATCH 06/18] fs: introduce get_mounted_path to get the path where a file is mounted
` [PATCH 07/18] ramfs: add symlink and readlink support
` [PATCH 08/18] nfs: add "
` [PATCH 09/18] test: add -L support to test if it's a symbolic link
` [PATCH 10/18] commands: add readlink support
` [PATCH 11/18] command: add ln support
` [PATCH 12/18] ls: add symlink support to -l
` [PATCH 13/18] dirname: add -V option to return only path related to the mountpoint
` [PATCH 14/18] recursive_action: add ACTION_FOLLOWLINKS support
` [PATCH 15/18] evnfs: introduce major and minor
` [PATCH 16/18] envfs: add support of variable inode size
` [PATCH 17/18] envfs: add support of symlink
` [PATCH 18/18] defautenv: "
[PATCH 0/7] defaultenv-2: add bootp support
2012-08-28 8:47 UTC (12+ messages)
` [PATCH 1/7] dhcp: add global var support
` [PATCH 2/7] dhcp: add alternative "
` [PATCH 3/7] dhcp: add retries limit support
` [PATCH 4/7] defaultenv-2: eth0 add default global.dhcp.vendor_id
` [PATCH 5/7] defaultenv-2: boot/net add bootp support
` [PATCH 6/7] defaultenv-2: add net boot support with kernel and oftree via nfs
` [PATCH 7/7] defaultenv-2: add symbolic link support to boot/nfs
[PATCH 0/5] defaultenv-2: add boot sequence
2012-08-28 8:26 UTC (10+ messages)
` [PATCH 1/5] globalbar: add inline when not enabled
` [PATCH 2/5] globalvar: add support to set a value to of all globalvars beginning with 'match'
` [PATCH 3/5] defaultenv-2: boot use global.linux.bootargs.dyn for dynamic globarvar
` [PATCH 4/5] defaultenv-2: boot reset linux.bootargs.dyn. and bootm. globarvar
` [PATCH 5/5] defaultenv-2: add boot sequence
[PATCH 1/1] arm: do not enable the previous bootz command
2012-08-28 7:51 UTC (2+ messages)
[PATCH] pcm049: use NAND_BUSWIDTH_AUTO
2012-08-28 6:49 UTC (2+ messages)
[PATCH] commands/digest: don't print checksum for non-existing files
2012-08-28 6:49 UTC (2+ messages)
[PATCH] Add documentation for the calao boards
2012-08-28 6:42 UTC
barebox on imx23-olinuxino
2012-08-27 18:01 UTC (2+ messages)
[PATCH 0/7] smsc911x: runtime configuration improvement
2012-08-27 14:20 UTC (13+ messages)
` [PATCH 1/7] smc911x: move register define to smc911x.h
` [PATCH 2/7] smc911x: introduce read/write ops
` [PATCH 3/7] smc911x: add 16bit bus width support
` [PATCH 4/7] smc911x: add support to pass the shift via platform data
` [PATCH 5/7] smc911x: improve detection handle
` [PATCH 6/7] smc911x: update chip detection
` [PATCH 7/7] smm911x: check if the device is ready before using it
Booting PhyTec PCM043/IMX35 from USB/SD-Card
2012-08-27 7:45 UTC (9+ messages)
Is there any way to dump more than 0x100 bytes from nand flash?
2012-08-27 4:29 UTC (3+ messages)
(no subject)
2012-08-21 13:04 UTC (31+ messages)
` [PATCH 01/13] Makefile: add target to produce a SPL compatible uimage
` [PATCH 02/13] scripts: add tool to create image for SPI boot on AM35xx
` [PATCH 03/13] common: split out meminfo output and make it optional
` [PATCH 04/13] omap: add SPI as a boot mode for xload
` [PATCH 05/13] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch
` [PATCH 06/13] drivers/net: add driver for the EMAC device found in some TI SoCs
` [PATCH 07/13] omap3: allow enabling clocks for UART3, MMC1 and SPI
` [PATCH 08/13] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs
` [PATCH 09/13] m25p80: add JEDEC ID for Micron/Numonyx SPI NOR flash
` [PATCH 10/13] defaultenv: support NAND and NOR kernel partitions at the same time
` [PATCH 11/13] defaultenv: use /env/oftree if it exists
` [PATCH 12/13] defaultenv: support kernel and oftree on a filesystem
` [PATCH 13/13] omap3_clock: avoid initializing cores not present on TI AM35xx
tftp server
2012-08-18 19:12 UTC (3+ messages)
adding SPI port on i.MX27 board
2012-08-18 9:08 UTC (2+ messages)
[PATCH 0/4 v2] fs/mount: add autodetection support
2012-08-15 7:25 UTC (4+ messages)
` [PATCH 1/4] fs/mount: add autodetection type support
vacation
2012-08-14 20:47 UTC
[PATCH 0/3 v2] omap: 4460 support
2012-08-14 20:03 UTC (5+ messages)
` [PATCH 1/3] Add support for OMAP4460 TPS62361
` [PATCH 2/3] OMAP4460: ram init changes
` [PATCH 3/3] OMAP4460: clock init
[PATCH 1/1] filetype: add command support
2012-08-13 21:53 UTC (2+ messages)
[PATCH v2] Add JTAG bitbang driver
2012-08-13 19:42 UTC (2+ messages)
[PATCH 1/3] Add support for OMAP4460 TPS62361
2012-08-13 19:08 UTC (3+ messages)
` [PATCH 3/3] OMAP4460: clock init
[PATCH 1/1] bootm: add global bootm.{image/initrd}.loadaddr support
2012-08-13 18:45 UTC (2+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox