[PATCH 00/11 v3] add PNG support
2012-09-08 18:05 UTC (5+ messages)
` [PATCH 01/11] bmp: rename it to splash
` [PATCH 02/11] bmp: split bmp rending in lib/bmp.c
` [PATCH 04/11] filetype: add BMP support
` [PATCH 05/11] splash/bmp: switch to image_renderer
[PATCH 00/11 v2] defaultenv-2: add bootp support
2012-09-08 17:35 UTC (34+ messages)
` [PATCH 01/11] defaultenv: enable glovalvar support
` [PATCH 02/11] defaultenv: switch hostname to global.hostname
` [PATCH 03/11] dhcp: switch to global var support
` [PATCH 04/11] dhcp: add copy_only_if_valid support
` [PATCH 05/11] dhcp: add retries limit support
` [PATCH 06/11] defaultenv-2: eth0 add default global.dhcp.vendor_id
` [PATCH 07/11] defaultenv-2/ip: add dhcp-barebox support
` [PATCH 08/11] defaultenv-2: add ifdown support
` [PATCH 09/11] defaultenv-2: boot/net add bootp support
` [PATCH 10/11] defaultenv-2: add net boot support with kernel and oftree via nfs
` [PATCH 11/11] defaultenv-2: add symbolic link support to boot/nfs
[PATCH 1/1] net: introduce phylib
2012-09-08 17:28 UTC (3+ messages)
[PATCH 0/7 v2] defaultenv-2: add boot sequence
2012-09-08 5:41 UTC (13+ messages)
` [PATCH 1/7] globalbar: add inline when not enabled
` [PATCH 2/7] globalvar: add support to set a value to of all globalvars beginning with 'match'
` [PATCH 3/7] defaultenv-2: boot use global.linux.bootargs.dyn for dynamic globarvar
` [PATCH 4/7] defaultenv-2: boot reset linux.bootargs.dyn. and bootm. globarvar
` [PATCH 5/7] echo: always allow to pass -e option
` [PATCH 6/7] defaultenv-2/ansi-colors: export color only if enable
` [PATCH 7/7] defaultenv-2: add boot sequence
[PATCH 00/11 v2] add PNG support
2012-09-08 3:47 UTC (13+ messages)
` [PATCH 01/11] bmp: rename it to splash
` [PATCH 02/11] bmp: split bmp rending in lib/bmp.c
` [PATCH 03/11] introduce image_renderer framework
` [PATCH 04/11] filetype: add BMP support
` [PATCH 05/11] splash/bmp: switch to image_renderer
` [PATCH 06/11] splash: add support to set a background color
` [PATCH 07/11] Introduce graphic utils
` [PATCH 08/11] graphic_utils: add rgba support
` [PATCH 09/11] filetype: add PNG support
` [PATCH 10/11] "
` [PATCH 11/11] png: add picoPNG lib support
[PATCH 1/1] smc911x: fix typo pn check if the device is ready before using it
2012-09-07 14:11 UTC
[PATCH] video imx-ipu-fb: add clear screen
2012-09-07 12:11 UTC (2+ messages)
[PATCH] mtd: nand: Add K9LBG08U0D chip to flash ids
2012-09-07 10:46 UTC
[PATCH 1/2] kbuild: keep the barebox binary accessible
2012-09-07 10:25 UTC (8+ messages)
` [PATCH 2/2] Makefile: add target to produce a SPL compatible uImage
` [PATCH v5] xload: get barebox size from barebox_arm_head
[PATCH] mtd/mtdraw: fix format specifier for ssize_t
2012-09-07 9:51 UTC
[PATCH 1/3] fec: restart autoneg at open instead of init
2012-09-07 9:32 UTC (17+ messages)
` [PATCH 2/3] i.MX51: unbreak FEC iomux
` [PATCH 3/3] miidev: fix 1G wrong detection
[PATCH] mtd: use correct format specifier
2012-09-07 9:25 UTC (2+ messages)
[PATCH 1/1] fs/nfs: fix read when size < 1024
2012-09-07 8:27 UTC (2+ messages)
[PATCH 00/12] add PNG support
2012-09-07 0:18 UTC (32+ messages)
` [PATCH 01/12] add barebox logo
` [PATCH 02/12] bmp: rename it to splash
` [PATCH 03/12] bmp: split bmp rending in lib/bmp.c
` [PATCH 04/12] introduce image_renderer framework
` [PATCH 05/12] filetype: add BMP support
` [PATCH 06/12] splash/bmp: switch to image_renderer
` [PATCH 07/12] splash: add support to set a background color
` [PATCH 08/12] Introduce graphic utils
` [PATCH 09/12] graphic_utils: add rgba support
` [PATCH 10/12] filetype: add PNG support
` [PATCH 11/12] "
` [PATCH 12/12] png: add picoPNG lib support
[PATCH 1/3] fec: restart autoneg at open instead of init
2012-09-06 21:52 UTC (2+ messages)
[PATCH] drivers/net: add driver for the EMAC device found in some TI SoCs
2012-09-06 17:34 UTC (3+ messages)
[PATCH] ARM Makefile: switch to kbuild command definition for mkublheader
2012-09-06 17:33 UTC (2+ messages)
[PATCH] PCM049: nand_bootstrap add shebang
2012-09-06 17:29 UTC (2+ messages)
[PATCH] i.mx35pdk add nand identification
2012-09-06 14:39 UTC (9+ messages)
[PATCH] [RFC] fec: fix calculation of mii bus speed on mxs
2012-09-06 13:50 UTC
[RFC] spi: add demo bitbang driver based on code from linux
2012-09-06 10:45 UTC (3+ messages)
[PATCH 1/2] Calao boards: enable the pbl
2012-09-06 9:52 UTC (2+ messages)
Prepare support for TI AM35xx
2012-09-06 8:58 UTC (16+ messages)
` [PATCH 1/8] drivers/nor/m25p80: add JEDEC ID for Micron/Numonyx SPI NOR flash
` [PATCH 2/8] Makefile: add target to produce a SPL compatible uimage
` [PATCH 3/8] scripts: add tool to create image for SPI boot on AM35xx
` [PATCH 4/8] common: split out meminfo output and make it optional
` [PATCH 5/8] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch
` [PATCH 6/8] drivers/net: add driver for the EMAC device found in some TI SoCs
` [PATCH 7/8] omap3: remove unused coded for clock configuration
` [PATCH 8/8] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs
[PATCH] provide ffs and __ashrdi3 for all architectures
2012-09-06 7:28 UTC (4+ messages)
` [PATCH] [OpenRISC] Add __ashrdi3 and remove link to libgcc
barebox ascii art
2012-09-06 6:43 UTC
[PATCH 1/2] mtd: fix compiler warnings
2012-09-05 18:53 UTC (3+ messages)
[PATCH 1/1] uncompress: drop wrong BUG(uncompress_size)
2012-09-05 14:59 UTC
v2012.09.0
2012-09-05 13:51 UTC
MLO doesn't work, rest is ok
2012-09-05 12:34 UTC (14+ messages)
[PATCH v3] xload: get barebox size from barebox_arm_head
2012-09-05 12:02 UTC (5+ messages)
` [PATCH v4] "
` Suspected ##SPAM## -:Re: "
[PATCH v4 0/2] Add stmpe mfd
2012-09-05 9:54 UTC (4+ messages)
` [PATCH v4 1/2] mfd: add stmpe-i2c driver
` [PATCH v4 2/2] gpio: add driver for stmpe io-expander
Prepare support for TI AM35xx
2012-09-05 9:28 UTC (7+ messages)
` [PATCH 09/10] omap3: allow enabling clocks for UART3, MMC1 and SPI
` [PATCH 10/10] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox