[PATCH] OMAP: Documentation file misspelled
2012-10-16 21:28 UTC (2+ messages)
[PATCH 0/5] BCM2835/Raspberry-Pi support
2012-10-16 21:24 UTC (8+ messages)
` [PATCH 1/5] BCM2835: add clocksource driver
` [PATCH 2/5] BCM2835: add gpio driver
` [PATCH 3/5] ARM1176: add support
` [PATCH 4/5] BCM2835: add support (arch)
` [PATCH 5/5] Raspberry-Pi: add support (board)
[PATCH 0/2] mtd add parent support and use pure device
2012-10-16 20:50 UTC (4+ messages)
` [PATCH 1/2] mtd: register device a "
` [PATCH 2/2] mtd: add parent support
[PATCH v4] bootm: add global bootm.{image/initrd}.loadaddr support
2012-10-16 20:41 UTC (3+ messages)
[PATCH 1/1] designware: fix 100mps phy support
2012-10-16 20:35 UTC (5+ messages)
` [PATCH 1/1] net:designware: allow to pass the phy interface
[PATCH] ARM bootz: use request_sdram_region
2012-10-16 20:30 UTC (5+ messages)
sandbox whith oftree on making error
2012-10-16 20:27 UTC (5+ messages)
[PATCH] cosmetic: remove right alignment on driver list
2012-10-16 19:58 UTC
[PATCH 0/2] openrisc: cleanup generic board
2012-10-16 19:54 UTC (3+ messages)
` [PATCH 1/2] openrisc: switch to defaultenv-2 and change boardinfo
` [PATCH 2/2] openrisc: generic board cleanup
[PATCH 1/1] console: use debug_ll before the console is available
2012-10-16 10:05 UTC
[PATCH v2 1/3] ARM: Add CLPS711X architecture
2012-10-16 8:09 UTC (12+ messages)
` [PATCH v2 2/3] ARM: clps711x: Add serial driver
` [PATCH v2 3/3] ARM: clps711x: Add generic board support (CLEP7212)
[PATCH] environment variables: use linux list
2012-10-16 7:35 UTC
[PATCH 4/4] memory: fix memory calculation
2012-10-16 6:54 UTC (2+ messages)
[PATCH 6/6] OMAP4: clean voltage switch
2012-10-15 21:42 UTC
[PATCH] make make -s more silent
2012-10-15 19:15 UTC
[PATCH 00/12] add bus device
2012-10-15 19:09 UTC (18+ messages)
` [PATCH 01/12] bus_for_each_device/bus_for_each_driver: add () to allow use &bus
` [PATCH 02/12] platform: add bus device
` [PATCH 03/12] amba: "
` [PATCH 04/12] fs: "
` [PATCH 05/12] mdio: "
` [PATCH 06/12] i2c: "
` [PATCH 07/12] spi: "
` [PATCH 08/12] usb: "
` [PATCH 09/12] fb: "
` [PATCH 10/12] mtd: register device a pure device
` [PATCH 11/12] mtd: add parent support
` [PATCH 12/12] eth: register device a pure device
barebox@ELCE
2012-10-15 19:05 UTC (9+ messages)
malloc Out of memory after ubiattach operation
2012-10-15 14:33 UTC (2+ messages)
[PATCH 0/5] BCM2835/Raspberry-Pi support
2012-10-15 14:20 UTC (9+ messages)
` [PATCH 1/5] BCM2835: add clocksource driver
` [PATCH 2/5] BCM2835: add gpio driver
` [PATCH 3/5] ARM1176: add support
` [PATCH 4/5] BCM2835: add support (arch)
` [PATCH 5/5] Raspberry-Pi: add support (board)
[PATCH 0/3] add mtd dataflash support
2012-10-15 13:32 UTC (7+ messages)
` [PATCH 1/3] import include/linux/math64.h
` [PATCH 2/3] mtd: add dataflash support
` [PATCH 3/3] usb-a9263: add spi "
[PATCH 1/2] ARM a9m2440: Fix lowlevel init
2012-10-15 13:30 UTC (2+ messages)
` [PATCH 2/2] ARM samsung S5P: Enable board support
[PATCH] barebox in-system update infrastructure
2012-10-15 13:15 UTC (6+ messages)
` [PATCH 1/5] Add in-system barebox "
` [PATCH 2/5] ARM i.MX: Add barebox update handler for internal boot
` [PATCH 3/5] ARM i.MX51 babbage: register MMC update handler
` [PATCH 4/5] ARM i.MX53 loco: "
` [PATCH 5/5] ARM i.MX53 tx53: register MMC and NAND "
[PATCH 0/4 v2] add wakup source
2012-10-15 8:04 UTC (9+ messages)
` [PATCH 1/4] reset_source: make enum and string human readable
` [PATCH 2/4] reset_source: add software reset as possible source
` [PATCH 3/4] reset_resource: add wakeup source
` [PATCH 4/4] at91: add reset and wakeup source detection support
[PATCH 0/6] archosg9: improve support for tablet
2012-10-15 7:27 UTC (9+ messages)
` [PATCH 1/6] ArchosG9: changed serial port and env
` [PATCH 2/6] ARM: add rename PSR bits to match linux names
` [PATCH 3/6] ARM: ensure irqs are disabled at barebox exit
` [PATCH 4/6] UIMAGE: improve transfer speed
` [PATCH 5/6] ARM: use arm setup stack function on archosg9
` [PATCH 6/6] OMAP4: clean voltage switch
[PATCH 1/1] designware: set parent for eth_device and miibus
2012-10-15 7:11 UTC (2+ messages)
[PATCH 1/1] amba: add periph id RO params to the device
2012-10-15 6:57 UTC (2+ messages)
[RFC v2] add 'miitool' command to view media-independent interface status
2012-10-14 20:43 UTC (6+ messages)
[PATCH] cosmetic: remove right alignment on driver list
2012-10-14 11:36 UTC (2+ messages)
[PATCH] ARM AT91: remove unnecessary 128m defconfigs
2012-10-14 9:58 UTC (2+ messages)
[PATCH 0/5] archosg9: improve support for tablet
2012-10-14 8:57 UTC (12+ messages)
` [PATCH 1/5] ArchosG9: changed serial port and env
` [PATCH 2/5] ARM: add/rename PSR bits to match linux names
` [PATCH 3/5] ARM: ensure irqs are disabled at barebox exit
` [PATCH 4/5] uimage: improve transfer speed
` [PATCH 5/5] omap4_usbboot_fs: add benchmarking capabilities
` [SPAM] Re: [PATCH 0/5] archosg9: improve support for tablet
[PATCH] cosmetic: extra new line in automount usage command
2012-10-13 18:21 UTC (2+ messages)
[PATCH 6/6] ARM: use arm_setup_stack function on archosg9
2012-10-13 14:22 UTC
[PATCH] mtd-core: add writesize in MEMGETINFO ioctl
2012-10-13 12:31 UTC (2+ messages)
[PATCH] documentation: add sandbox malloc argument
2012-10-13 12:30 UTC (2+ messages)
[PATCH 1/2] sandbox: move add_image for env in second getopt
2012-10-13 12:29 UTC (3+ messages)
` [PATCH 2/2] sandbox: fix malloc argument string
[PATCH 0/5] BCM2835/Raspberry-Pi
2012-10-13 12:16 UTC (7+ messages)
` [PATCH 1/5] BCM2835: add clocksource driver
` [PATCH 2/5] BCM2835: add gpio driver
` [PATCH 3/5] ARM1176: add support
` [PATCH 4/5] BCM2835: add support (arch)
` [PATCH 5/5] Raspberry-Pi: add support (board)
[PATCH 1/2] ARM OMAP: Create device file
2012-10-13 12:10 UTC (4+ messages)
[PATCH 1/4] reset_source: make enum and string human readable
2012-10-13 7:51 UTC (4+ messages)
` [PATCH 2/4] reset_source: add software reset as possible source
` [PATCH 3/4] reset_resource: add wakeup source
` [PATCH 4/4] at91: add reset and wakeup source detection support
[PATCH] More Karo tx53 support
2012-10-12 16:52 UTC (5+ messages)
` [PATCH 1/4] ARM i.MX53: enable imx53_init_lowlevel for pbl
` [PATCH 2/4] ARM i.MX tx53: Add rev xx30 board support
` [PATCH 3/4] ARM i.MX53: set bootsource location
` [PATCH 4/4] ARM i.MX Karo tx53: Add env depending on bootsource
[PATCH] ARM: introduce arm_setup_stack function and use it
2012-10-12 16:46 UTC
[PATCH 1/2] Makefile: Add missing force for barebox-flash-image
2012-10-12 16:40 UTC (2+ messages)
` [PATCH 2/2] defaultenv: dependencies fixes
[PATCH 1/2] defaultenv-2: Select CMD_ECHO & CMD_ECHO_E by default
2012-10-12 11:22 UTC (6+ messages)
` [PATCH 2/2] defaultenv-2: Select CMD_EDIT by default if CMD_MENU_MANAGEMENT is selected
` Re[2]: [PATCH 1/2] defaultenv-2: Select CMD_ECHO & CMD_ECHO_E by default
[PATCH 0/5] BCM2835/RPi support
2012-10-12 9:35 UTC (10+ messages)
` [PATCH 1/5] BCM2835: clocksource driver
` [PATCH 2/5] BCM2835: add gpio driver
` [PATCH 3/5] ARM1176: add support
` [PATCH 4/5] BCM2835: "
` [PATCH 5/5] Raspberry-Pi: "
error building sandbox with debug on
2012-10-12 9:15 UTC (3+ messages)
[PATCH] cosmetic: improve command list display
2012-10-12 8:54 UTC (2+ messages)
[PATCH 00/14] archosg9: add support for tablet
2012-10-12 8:39 UTC (5+ messages)
[PATCH] cosmetic: improve drivers list display
2012-10-12 8:12 UTC (2+ messages)
[PATCH 2/2 v2] common/partitions.c: make use of is_fat_or_mbr
2012-10-12 8:08 UTC (2+ messages)
[PATCH 1/2] common/paritions.c: force little endian reads
2012-10-12 8:07 UTC (2+ messages)
[PATCH] defaultenv-2: boot: add missing space in error message
2012-10-12 8:04 UTC (2+ messages)
[PATCH 1/2] parameter: fix memory leak
2012-10-12 8:03 UTC (2+ messages)
[PATCH] parameter: remove unused function global_add_parameter
2012-10-12 7:59 UTC (2+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox