[PATCH 1/2] mfd stmpe: add index to devicename
2012-11-29 19:02 UTC (2+ messages)
` [PATCH 2/2] mfd stmpe: fix test for features
[PATCH 1/5] mci: Add STUFF_BITS and use it
2012-11-29 19:02 UTC (5+ messages)
` [PATCH 2/5] mci: Fix capacity calculation for high capacity MMC cards
` [PATCH 3/5] mci: Allow to specify device name
` [PATCH 4/5] mci i.MX esdhc: Allow to specify devicename from platformdata
` [PATCH 5/5] mci i.MX esdhc: turn error message into debug message
[PATCH 1/4] barebox update: fix finding default handler
2012-11-29 19:01 UTC (4+ messages)
` [PATCH 2/4] ARM i.MX bbu: Add i.MX6 MMC handler
` [PATCH 3/4] ARM i.MX bbu internal: Add spi/i2c support
` [PATCH 4/4] ARM i.MX6: save boot location
[PATCH] i2c: Add missing DEVICE_ID_DYNAMIC
2012-11-29 19:00 UTC
[PATCH v2] ARM i.MX: Add Garz+Fricke Vincell Board support
2012-11-29 18:43 UTC (3+ messages)
[PATCH] Add Garz+Fricke Vincell board support
2012-11-28 10:23 UTC (7+ messages)
` [PATCH 1/4] ARM i.MX5: move pll setup defines to header file
` [PATCH 2/4] ARM i.MX: add esdctl-v4 support
` [PATCH 3/4] ARM i.MX: Add Garz+Fricke Vincell Board support
` [PATCH 4/4] ARM i.MX esdctl: Use defines from exisiting header file
[PATCH] ARM i.MX53 loco: switch to new default env
2012-11-28 10:16 UTC
[PATCH 1/2] ARM i.MX bbu: Allow to overwrite app_dest
2012-11-28 9:57 UTC (2+ messages)
` [PATCH 2/2] ARM i.MX bbu: Allow to have no DCD
[PATCH] clk: check for invalid clocks
2012-11-28 9:57 UTC
[PATCH] i.MX sdram controller driver support
2012-11-27 20:48 UTC (4+ messages)
` [PATCH 1/3] ARM i.MX: Add driver to get sdram base and size
` [PATCH 2/3] ARM i.MX: register esdctl controller device
` [PATCH 3/3] ARM i.MX boards: use esdctl code to detect sdram size
[PATCH 1/4] ARM i.MX bbu: Fix compiling with DEBUG enabled
2012-11-27 20:01 UTC (4+ messages)
` [PATCH 2/4] ARM i.MX esdctl.h: Add double include protection
` [PATCH 3/4] i.MX27 regs remove unnecessary include
` [PATCH 4/4] serial i.MX: Make locally used variables static
[PATCH] Cleanup Kconfig files
2012-11-26 14:00 UTC (3+ messages)
` Re[2]: "
commands: md, mw: add the '-x' option (swap bytes)
2012-11-26 10:16 UTC (5+ messages)
` [PATCH 1/3] mem: add the swab (swap bytes) option to memory_display()
` [PATCH 2/3] commands: md: add the '-x' option (swap bytes)
` [PATCH 3/3] commands: mw: "
[PATCH 1/3] debug_ll: Let architectures define PUTC_LL directly
2012-11-26 10:13 UTC (3+ messages)
` [PATCH 2/3] debug_ll: Add some usage comments
` [PATCH 3/3] i.MX debug_ll support
[RFC 0/3] commands: md, mw: add '-x' option (swap bytes)
2012-11-26 8:52 UTC (5+ messages)
` [RFC 1/3] add swab (swap bytes) option to memory_display()
` [RFC 2/3] commands: md: add '-x' option (swap bytes)
` [RFC 3/3] commands: mw: "
[PATCH] phylib: fix compiler warning
2012-11-26 8:07 UTC (2+ messages)
[RFC 0/3] MIPS: add pre-bootloader (pbl) image support
2012-11-26 8:05 UTC (9+ messages)
` [RFC 1/3] "
` [RFC 2/3] MIPS: boot: realize _start in C
` [RFC 3/3] MIPS: qemu-malta_defconfig: use pbl
[PATCH 0/2] Some corrections on archosG9
2012-11-26 8:00 UTC (6+ messages)
` [PATCH 1/2] uimage: fix misunderstanding in common/uimage.c
` [PATCH 2/2] archosg9: improve configuration
[PATCH] xymodem.c: fix compiler warning
2012-11-26 7:56 UTC (3+ messages)
[PATCH 0/2] at91: at91sam9n12 support
2012-11-26 7:34 UTC (4+ messages)
` [PATCH 1/2] arm: at91: add "
` [PATCH 2/2] at91: add at91sam9n12ek board support
[PATCH 0/4] at91: some fixes
2012-11-26 7:31 UTC (11+ messages)
` [PATCH 1/4] at91: fix timer rate
` [PATCH 2/4] atmel_nand: fix pmecc timeout
` [PATCH 3/4] at91: clock: check overclock for sam9260/9261/9263/9rl
` [PATCH 4/4] Revert "mtd: atmel_nand: optimize read/write buffer functions"
what's the meaning of 'dyn'
2012-11-26 6:00 UTC
NAND_ATMEL strange behavior on at91rm9200 board
2012-11-23 15:12 UTC (2+ messages)
[PATCH] read cfi device id according the bus width
2012-11-22 8:06 UTC (3+ messages)
[PATCH] read cfi device id according the bus width
2012-11-22 6:38 UTC (4+ messages)
[PATCH] read cfi device id according the bus width
2012-11-22 5:46 UTC (2+ messages)
Can I use NAND_ATMEL on at91rm9200 board
2012-11-22 5:45 UTC (2+ messages)
test
2012-11-22 1:22 UTC
USB host Unrecoverable Error on AT91SAM9x5-ek
2012-11-21 15:15 UTC (3+ messages)
bmp splash memory corruption
2012-11-21 10:55 UTC (6+ messages)
` [PATCH 1/2] splash: init struct allocated the stack to 0
` [PATCH 2/2] bmp: specify we need to keep the data read from the file
where is tftp mounting documented in the source code?
2012-11-21 9:11 UTC (4+ messages)
[PATCH 1/5] pinctrl: at91: provide gpio names
2012-11-20 21:35 UTC (6+ messages)
` [PATCH 2/5] pinctrl: at91 add deglitch, debounce, pull down and schmitt trigger mux option support
` [PATCH 3/5] ARM: at91sam9: add macb pinctrl support
` [PATCH 4/5] ARM: at91: fix usart/uart namimg in pinctrl
` [PATCH 5/5] ARM: at91: dt: at91sam9260: split rts and cts pinctrl not
Ramfs and NULL pointer
2012-11-20 20:50 UTC (5+ messages)
[PATCH 0/2] m25p80: re-import it againt mtd_add_host
2012-11-20 14:34 UTC (6+ messages)
defaultenv-2: how to update a flash partition?
2012-11-20 12:21 UTC (5+ messages)
[PATCH 0/7] phylib: fix + drivers
2012-11-20 8:39 UTC (9+ messages)
` [PATCH 1/7] driver: introduce device_probe to manully probe a device
` [PATCH 2/7] phylib: fix generic phy driver probe
` [PATCH 3/7] mdio_bus: fix match
` [PATCH 4/7] phylib: export phy_id via param
` [PATCH 5/7] phylib: introduction of forced 100Mbps
` [PATCH 6/7] phylib: add fixup support
` [PATCH 7/7] phylib: add micrel support
[PATCH] ARM pcm043: Fix macro name
2012-11-20 8:33 UTC (2+ messages)
wrong cfi flash device id
2012-11-20 8:29 UTC (3+ messages)
[PATCH] mach-imx: Add/correct help info in mach-imx/Kconfig
2012-11-20 8:01 UTC (2+ messages)
[PATCH] nand-bb: Fix remove of nand-bb device
2012-11-20 7:25 UTC (2+ messages)
ARM: pbl: short patches
2012-11-20 7:24 UTC (10+ messages)
` [PATCH 1/3] ARM: pbl: remove zbarebox.map during 'make clean'
` [PATCH 2/3] ARM: start-pbl.c: make errorfn() static
` [PATCH 3/3] ARM: start-pbl.c: unificate path to lib/decompress_*.c
RFC: first patch for getting arch-specific stuff out of asm-generic/barebox.lds.h
2012-11-19 13:53 UTC
[PATCH 0/2 v2] add bus device
2012-11-19 10:36 UTC (2+ messages)
[PATCH] imx53: implement imx53_add_kpp
2012-11-19 10:32 UTC (2+ messages)
[PATCH 1/1] led-gpio: add bicolor led support
2012-11-19 10:26 UTC (2+ messages)
[PATCH 1/1] at91sam9260ek: specify mach entry
2012-11-19 10:24 UTC (4+ messages)
[PATCH] i.MX25 & 35 usb config bits : fix host power bit
2012-11-19 10:08 UTC (2+ messages)
[PATCH 0/7 v2] at91sam9 add watchdog support with keep alive
2012-11-19 10:08 UTC (9+ messages)
` [PATCH 1/7] watchdog: add keep alive support
` [PATCH 2/7] watchdog: add at91sam9 watchdog support
` [PATCH 6/7] at91sam9g45: add wathdog support
` [PATCH 7/7] at91sam9x5: "
howto cp to flash
2012-11-19 10:05 UTC (5+ messages)
is there a standard for putting the name of a source file in the file?
2012-11-19 9:46 UTC (5+ messages)
[PATCH] MIPS: main_entry.c: fix typo
2012-11-19 9:17 UTC (2+ messages)
[PATCH] bareboxenv.c: simple grammatical fix
2012-11-19 9:16 UTC (2+ messages)
[PATCH] arm lib: Remove redundant boot usage info from boot[uz].c
2012-11-19 9:14 UTC (2+ messages)
[PATCH] mach-imx: Comment typo fix, "enviroment" -> "environment"
2012-11-19 9:14 UTC (2+ messages)
are there still issues with building sandbox on x86_64?
2012-11-19 9:12 UTC (3+ messages)
shouldn't asm-generic/barebox.lds.h be arch-independent?
2012-11-19 8:32 UTC (5+ messages)
after "git pull", building for beagle complains about missing "lzop"
2012-11-16 20:01 UTC (3+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox