[For-nex PATCH 0/8 v2] at91: add atmel lcdc framebuffer support
2013-01-27 11:20 UTC (7+ messages)
` [PATCH 1/8] video: add atmel lcdc frambuffer support
` [PATCH 2/8] at91sam9263: "
` [PATCH 3/8] at91sam9261: "
` [PATCH 4/8] at91sam9g45: "
` [PATCH 6/8] at91sam9m10ihd: add lcd support
` [PATCH 8/8] at91sam9263ek: "
[PATCH 1/1] at91sam9261: fix max bare_init it's 156KiB
2013-01-27 11:19 UTC (2+ messages)
[PATCH 1/1] Animeo IP: use gpiolib ip to detect the hw version
2013-01-27 11:19 UTC (2+ messages)
[PATCH] Add new ARM entry point for barebox
2013-01-27 11:09 UTC (37+ messages)
` [PATCH 01/34] ARM: Add new "
` [PATCH 02/34] ARM: add __noreturn to board_init_lowlevel_return
` [PATCH 03/34] ARM i.MX: Use SRAM stack in lowlevel code
` [PATCH 04/34] ARM i.MX: Add i.MX specific entry point for barebox
` [PATCH 05/34] ARM i.MX: prepare external nand boot for SoC specific entry
` [PATCH 06/34] ARM i.MX boards: switch to barebox_arm_entry
` [PATCH 07/34] ARM MXS "
` [PATCH 08/34] ARM OMAP "
` [PATCH 09/34] ARM Samsung "
` [PATCH 10/34] ARM PXA "
` [PATCH 11/34] ARM ep93xx "
` [PATCH 12/34] ARM tegra "
` [PATCH 13/34] ARM nomadik "
` [PATCH 14/34] ARM versatile "
` [PATCH 15/34] ARM netx "
` [PATCH 16/34] ARM clep7212: "
` [PATCH 17/34] ARM raspberrypi: "
` [PATCH 18/34] ARM AT91 mmccpu: Fix non existing define
` [PATCH 19/34] ARM AT91: switch to barebox_arm_entry part1
` [PATCH 20/34] ARM AT91: switch at91rm9200 board to barebox_arm_entry
` [PATCH 21/34] ARM AT91: switch remaining boards "
` [PATCH 22/34] ARM: remove now unused MACH_[HAS|DO]_LOWLEVEL_INIT
` [PATCH 23/34] ARM start-pbl: make board_init_lowlevel_return static
` [PATCH 24/34] ARM start-pbl: call uncompressed binary with arguments
` [PATCH 25/34] ARM start: pickup parameters from pbl
` [PATCH 26/34] ARM: Setup stack at end of SDRAM
` [PATCH 27/34] ARM pbl: Use dynamic parameters for early malloc space
` [PATCH 28/34] ARM mmu: pickup already enabled mmu
` [PATCH 29/34] ARM: Factor out early mmu code
` [PATCH 30/34] ARM: Enable mmu early
` [PATCH 31/34] ARM: Automatically determine malloc size
` [PATCH 32/34] generic memory layout: fix deps for [MALLOC|STACK]_BASE
` [PATCH 33/34] ARM: disable HAVE_CONFIGURABLE_MEMORY_LAYOUT
` [PATCH 34/34] ARM pbl: inline decompress function
[PATCH 0/7] globalvar: add multiple device support
2013-01-27 10:56 UTC (12+ messages)
` [PATCH 1/7] params: allow to access first sub-device and params via env
` [PATCH 2/7] globalvar: add it's own bus
` [PATCH 3/7] globalvar: allow to register multiple device
` [PATCH 4/7] net: switch to global device
` [PATCH 5/7] dhcp: switch globalvar to it's own device
` [PATCH 6/7] bootm: "
` [PATCH 7/7] bootargs: "
[PATCH 0/5] at91sam9261: add bootstrap and firstage support
2013-01-26 23:14 UTC (8+ messages)
` [PATCH 1/5] at91sam9260/9g20/9261/9g10/9263: split soc lowlevel_init from generic
` [PATCH 2/5] at91: introduce AT91_LOAD_BAREBOX_SRAM to specifcy which size load for external boot
` [PATCH 3/5] at91sam9261ek: add spi support
` [PATCH 4/5] at91sam9261ek: add boostrap support
` [PATCH 5/5] at91sam9261ek: add first stage support
[PATCH 1/1] gpio_keys: fix loop on buttons for request and configuration
2013-01-26 22:14 UTC (2+ messages)
[PATCH] spi: fix compiler warning
2013-01-26 22:13 UTC (2+ messages)
[PATCH 0/4] MIPS: introduce ram0 regions register function
2013-01-26 16:52 UTC (5+ messages)
` [PATCH 1/4] "
` [PATCH 2/4] MIPS: qemu-malta: use mips_add_ram0()
` [PATCH 3/4] MIPS: rzx50: "
` [PATCH 4/4] MIPS: dlink-dir-320: "
[PATCH] ARM AT91 pm9263: Fix phy address
2013-01-26 11:26 UTC
[PATCH] fix build warnings
2013-01-26 11:23 UTC (4+ messages)
` [PATCH 1/3] ARM bcm2835: Fix noreturn function does return
` [PATCH 2/3] ARM: Fix reassigning symbols in defconfigs
` [PATCH 3/3] pbl string: Fix no previous prototype warnings
[PATCH] arm-mmu: switch pte flags vars to lower case
2013-01-25 18:51 UTC (2+ messages)
[PATCH] ARM AT91 mmccpu: Fix non existing define
2013-01-25 18:29 UTC
[PATCH] of: Fix of_find_node_by_path breakage
2013-01-25 18:25 UTC (2+ messages)
[PATCH] defenv-2: source /env/config after /env/init/*
2013-01-25 18:00 UTC (2+ messages)
[PATCH 0/2] at91: add atmel at91sam9m10ihd tabel support
2013-01-25 17:36 UTC (4+ messages)
` [PATCH 1/2] at91sam9m10g45ek/defconfig: set board type
` [PATCH 2/2] at91: add at91sam9m10ihd tablet support
[PATCH 0/2] tny-a9263: add spi + bootstrap support
2013-01-25 17:36 UTC (4+ messages)
` [PATCH 1/2] tny-a9263: add dataflash support
` [PATCH 2/2] tny_a9263: add bootstrap support
[for master PATCH 00/14] atmel_mci: fixes and cleanup
2013-01-25 17:35 UTC (17+ messages)
` [PATCH 01/14] atmel_mci: rename atmel_mci_host tp atmel_mci
` [PATCH 02/14] atmel_mci: rename atmel_mci_readl/writel to atmci_readl/writel
` [PATCH 03/14] atmel_mci: rename all function to start with atmci
` [PATCH 04/14] atmel_mci: use linux regs define
` [PATCH 05/14] atmel_mci: detect IP version
` [PATCH 06/14] atmel_mci: version 0x5xx of the IP have a different clk div
` [PATCH 07/14] atmel_mci: fix host init
` [PATCH 08/14] atmel_mci: rwproof is only needed since IP version 0x200
` [PATCH 09/14] atmel_mci: on version 0x0 we need to reset the IP at each request
` [PATCH 10/14] atmel_mci: after a software timeout the IP need to be reset
` [PATCH 11/14] atmel_mci: support the SD highspeed since IP version 0x300
` [PATCH 12/14] atmel_mci: update the SD/SDIO Card Register at request time
` [PATCH 13/14] atmel_mci: drop board host caps
` [PATCH 14/14] atmel_mci: gpio: request and configure card detect
[for next PATCH 0/2] MMC: introduce write protect support
2013-01-25 15:38 UTC (3+ messages)
` [PATCH 1/2] mci: add card_write_protected
` [PATCH 2/2] atmel_mci: add write protect detection support
[PATCH v4] ARM: at91: Add Telit EVK-PRO3 board support
2013-01-25 13:13 UTC (2+ messages)
[PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support
2013-01-25 12:30 UTC (7+ messages)
[PATCH] defenv-2: migrate guf-vincell to config-board
2013-01-25 9:30 UTC
[For-next PATCH 0/2 v2] at91: add Somfy Animeo-IP support
2013-01-24 21:11 UTC (3+ messages)
` [PATCH 1/2] at91sam9260ek: specify mach entry
` [PATCH 2/2] at91: add Somfy Animeo IP support
[PATCH 0/2] at91: add Somfy Animeo-IP support
2013-01-24 20:58 UTC (3+ messages)
` [PATCH 1/2] at91sam9260ek: specify mach entry
` [PATCH 2/2] at91: add Somfy Animeo IP support
[PATCH] ARM OMAP: use SZ_*M constants in RAM device register functions
2013-01-24 18:55 UTC
[PATCH v2] ARM: at91: Add Telit EVK-PRO3 board support
2013-01-24 15:46 UTC (4+ messages)
[PATCH 0/2] at91: bootstrap: add menu support
2013-01-24 11:33 UTC (3+ messages)
` [PATCH 1/2] menu: the dependancy on process escape is wrong drop it
` [PATCH 2/2] at91: bootstrap: add menu support
[PATCH] feature_list: a way to pass hardware info to the kernel
2013-01-23 21:37 UTC (3+ messages)
[PATCH v2 0/8] add new memtest command
2013-01-23 20:55 UTC (9+ messages)
` [PATCH 8/8] memtest: add rewritten "
[PATCH 0/2] console none support
2013-01-23 20:49 UTC (6+ messages)
` [PATCH 1/2] console: switch select to choice
` [PATCH 2/2] introduce console none support
[PATCH 0/2] ohci: fixes
2013-01-23 19:28 UTC (4+ messages)
` [PATCH 1/2] ohci: make it depends on !MMU
` [PATCH 2/2] ohci: only enable drivers if ohci is enabled
[PATCH 0/9] atmel: add ehci support
2013-01-23 19:28 UTC (15+ messages)
` [PATCH 1/9] usb: add parameters info on usb device
` [PATCH 2/9] usb: fix for USB_ST_STALLED status reporting in ehci_submit_async()
` [PATCH 3/9] ehci: if caps ressource is not provided discover it via cr_capbase
` [PATCH 4/9] ehci: add atmel support
` [PATCH 5/9] at91: usb: allow to specicfy inverted vbus
` [PATCH 6/9] at91sam9g45: add ehci support
` [PATCH 7/9] at91sam9m10g45ek: add usb support
` [PATCH 8/9] at91sam9x5: add ehci support
` [PATCH 9/9] at91sam9x5ek: add usb support
AT91SAM9260EK DFU - Error using dfu-util
2013-01-23 13:45 UTC (3+ messages)
[PATCH] ARM v7: Fix register corruption in v7_mmu_cache_off
2013-01-23 9:43 UTC
[PATCH 1/5] ARM: ccmx51: Remove SDRAM size settings
2013-01-23 7:35 UTC (6+ messages)
` [PATCH 2/5] ARM: ccmx51: Fix ethernet devices control by MC13892 GPOs
` [PATCH 3/5] ARM: ccmx51: Set MAC address before FEC device registration
` [PATCH 4/5] ARM: ccmx51js: Define reset pin for USB Host1
` [PATCH 5/5] ARM: ccmx51: Update defconfig
[PATCH 00/10 v7] at91: add bootstrap support
2013-01-23 7:33 UTC (12+ messages)
` [PATCH 01/10] filetype: add is_barebox_mips_head support
` [PATCH 02/10] filetype: add is_barebox_head
` [PATCH 03/10] at91: dump mux command: make it depends on COMMAND_SUPPORT
` [PATCH 04/10] at91: add test commamd to emulate bootrom boot
` [PATCH 05/10] at91sam926x: lowlevel add external boot support
` [PATCH 06/10] at91: sam926x: switch lowlevel param to c code
` [PATCH 07/10] at91: usb-a9263 add lowlevel init
` [PATCH 08/10] introduce common bootstrap code
` [PATCH 09/10] at91: add bootstrap version
` [PATCH 10/10] at91: usb_a9263: "
[RFC PATCH 1/1] omap: xload: switch to generic bootstrap
2013-01-22 14:36 UTC (2+ messages)
PingBrother news - may the Firmware be with you
2013-01-22 13:32 UTC
Memory size issue
2013-01-22 9:51 UTC (3+ messages)
` Re[2]: "
[PATCH 00/10 v6] at91: add bootstrap support
2013-01-22 8:12 UTC (6+ messages)
` [PATCH 01/10] filetype: add is_barebox_mips_head support
` [PATCH 04/10] at91: add test commamd to emulate bootrom boot
` [PATCH 06/10] at91: sam926x: switch lowlevel param to c code
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox