[PATCH v3] Add new ARM entry point for barebox
2013-02-03 15:10 UTC (5+ messages)
` [PATCH 01/36] ARM: Add new "
` [PATCH 02/36] ARM: add __noreturn to board_init_lowlevel_return
` [PATCH 04/36] ARM i.MX: Add i.MX specific entry point for barebox
` [PATCH 05/36] ARM i.MX: prepare external nand boot for SoC specific entry
[PATCH 1/1] at91sam9_ddrsdr: fix register on mdr read for ddr size
2013-02-03 13:49 UTC (2+ messages)
` [PATCH v2] at91sam9_ddrsdr: fix register on mdr read and sdram detection "
[PATCH] usb-a926x: only provide the resource if the driver is enable
2013-02-03 13:07 UTC
[PATCH 1/1] MAKEALL: add regex support
2013-02-03 10:16 UTC
[PATCH v2] Add new ARM entry point for barebox
2013-02-03 10:13 UTC (40+ messages)
` [PATCH 01/34] ARM: Add new "
` [PATCH 02/34] ARM: add __noreturn to board_init_lowlevel_return
` [PATCH 03/34] ARM i.MX: Use SRAM stack in lowlevel code
` [PATCH 04/34] ARM i.MX: Add i.MX specific entry point for barebox
` [PATCH 05/34] ARM i.MX: prepare external nand boot for SoC specific entry
` [PATCH 06/34] ARM i.MX boards: switch to barebox_arm_entry
` [PATCH 07/34] ARM MXS "
` [PATCH 08/34] ARM OMAP "
` [PATCH 09/34] ARM Samsung "
` [PATCH 10/34] ARM PXA "
` [PATCH 11/34] ARM ep93xx "
` [PATCH 12/34] ARM tegra "
` [PATCH 13/34] ARM nomadik "
` [PATCH 14/34] ARM versatile "
` [PATCH 15/34] ARM netx "
` [PATCH 16/34] ARM clep7212: "
` [PATCH 17/34] ARM raspberrypi: "
` [PATCH 18/34] ARM AT91: switch to barebox_arm_entry part1
` [PATCH 19/34] ARM AT91: switch at91rm9200 board to barebox_arm_entry
` [PATCH 20/34] ARM AT91: switch sama5d3 "
` [PATCH 21/34] ARM AT91: switch remaining boards "
` [PATCH 22/34] ARM: remove now unused MACH_[HAS|DO]_LOWLEVEL_INIT
` [PATCH 23/34] ARM start-pbl: make board_init_lowlevel_return static
` [PATCH 24/34] ARM start-pbl: call uncompressed binary with arguments
` [PATCH 25/34] ARM start: pickup parameters from pbl
` [PATCH 26/34] ARM: Setup stack at end of SDRAM
` [PATCH 27/34] ARM pbl: Use dynamic parameters for early malloc space
` [PATCH 28/34] ARM mmu: pickup already enabled mmu
` [PATCH 29/34] ARM: Factor out early mmu code
` [PATCH 30/34] ARM: Enable mmu early
` [PATCH 31/34] ARM: Automatically determine malloc size
` [PATCH 32/34] generic memory layout: fix deps for [MALLOC|STACK]_BASE
` [PATCH 33/34] ARM: disable HAVE_CONFIGURABLE_MEMORY_LAYOUT
` [PATCH 34/34] ARM pbl: inline decompress function
[PATCH 1/1] atmel_lcdfb: fix warning: implicit declaration of function 'clk_get_rate'
2013-02-03 10:09 UTC (2+ messages)
` [PATCH v2] "
Lost access to M25Pxx in move to 2013.01
2013-02-02 18:09 UTC (3+ messages)
[PATCH 1/1] omap3: fix debug_ll uart base
2013-02-02 7:49 UTC (4+ messages)
[PATCH v3 0/4] gpiolib: add gpio_request_{in,out}put support
2013-02-01 19:23 UTC (7+ messages)
` [PATCH v3 1/4] gpiolib: fix whitespaces
` [PATCH v3 2/4] gpiolib: add gpio_request_{in,out}put support
` [PATCH v3 3/4] at91sam9*: use gpio_request_output()
` [PATCH v3 4/4] animeo_ip: use gpio_request_input()
[PATCH v2 0/5] gpiolib: add gpio_request_{in,out}put support
2013-02-01 18:24 UTC (9+ messages)
` [PATCH v2 1/5] gpiolib: fix whitespaces
` [PATCH v2 2/5] gpiolib: add gpio_request_{in,out}put support
` [PATCH v2 3/5] gpiolib: gpio_request(): add error message
` [PATCH v2 4/5] at91sam9*: use gpio_request_output()
` [PATCH v2 5/5] animeo_ip: use gpio_request_input()
make mrproper depends on a .config file?
2013-02-01 10:33 UTC
[PATCH 1/1] sama5d3k: the nand flash is 4 bit ecc capable so use it
2013-02-01 7:45 UTC
[PATCH 0/4] gpiolib: add gpio_request_{in,out}put support
2013-01-31 19:33 UTC (6+ messages)
` [PATCH 1/4] gpiolib: fix whitespaces
` [PATCH 2/4] gpiolib: add gpio_request_{in,out}put support
` [PATCH 3/4] at91sam9*: use gpio_request_output()
` [PATCH 4/4] animeo_ip: use gpio_request_input()
[PATCH 1/1] beagle: add nand partition and boot
2013-01-31 18:37 UTC
[PATCH 0/5] at91sam9261: add bootstrap and firstage support
2013-01-31 13:23 UTC (7+ messages)
` [PATCH 1/5] at91sam9260/9g20/9261/9g10/9263: split soc lowlevel_init from generic
` [PATCH 5/5] at91sam9261ek: add first stage support
[PATCH 0/2] at91: bootstrap: add menu support
2013-01-31 13:21 UTC (2+ messages)
[RFC PATCH 1/1] omap: xload: switch to generic bootstrap
2013-01-31 13:20 UTC (4+ messages)
[For-next PATCH 0/6] atmel: add Atmel HLCDC support and boards
2013-01-31 11:55 UTC (9+ messages)
` [PATCH 1/8] atmel_lcdfb: factorise common code between lcdc and new hlcdc IP
` [PATCH 2/8] video: add Atmel HLCD support
` [PATCH 3/8] at91sam9x5: add lcd support
` [PATCH 4/8] at91sam9x5ek: "
` [PATCH 5/8] at91sam9n12: "
` [PATCH 6/8] at91sam9n12ek: "
` [PATCH 7/8] sama5d3: "
` [PATCH 8/8] sama5d3xek: "
[PATCH 0/3] at91sam9260/9g20ek: some cleanup
2013-01-31 11:42 UTC (6+ messages)
` [PATCH 1/3] at91sam9260/9g20ek: cleanup coding style
` [PATCH 2/3] at91sam9260/9g20ek: move sam9_smc_config modification inside definition
` [PATCH 3/3] at91sam9260/9g20ek: enable clock via clock framework
[PATCH v2] nand_write: initialize OOB buffer for each page
2013-01-31 8:21 UTC
current master pandaboard booting broken
2013-01-31 8:15 UTC (2+ messages)
[PATCH 0/6] atmel: add Atmel HLCDC support and boards
2013-01-30 23:20 UTC (7+ messages)
` [PATCH 1/6] atmel_lcdfb: factorise common code between lcdc and new hlcdc IP
` [PATCH 2/6] video: add Atmel HLCD support
` [PATCH 3/6] at91sam9x5: add lcd support
` [PATCH 4/6] at91sam9x5ek: "
` [PATCH 5/6] sama5d3: "
` [PATCH 6/6] sama5d3xek: "
[PATCH v5] ARM: at91: Add Telit EVK-PRO3 board support
2013-01-30 21:53 UTC (2+ messages)
[PATCH 1/2] nand_write: initialize OOB buffer for each page
2013-01-30 21:52 UTC (4+ messages)
` [PATCH 2/2] nand_omap_gpmc: use 0x00 for ECC padding in BCH ROM mode
[PATCH v2] pcm049: clean up defconfig
2013-01-30 21:35 UTC (2+ messages)
[PATCH 0/3] pbl: factorise decompress code and add none compress support
2013-01-30 21:33 UTC (5+ messages)
` [PATCH 1/3] pbl: move configs to pbl/Kconfig
` [PATCH 2/3] pbl: factorise decompressor
` [PATCH 3/3] pbl: add none compression support
[PATCH] commands: reset: add shutdown_barebox() before reset_cpu()
2013-01-30 21:23 UTC (2+ messages)
[PATCH] ARM OMAP: use SZ_*M constants in RAM device register functions
2013-01-30 21:22 UTC (3+ messages)
smooth BrOperator
2013-01-30 18:37 UTC
[PATCH 0/2 v2] at91: add sama5d3 support
2013-01-30 12:13 UTC (4+ messages)
` [PATCH 1/2 v3] "
` [PATCH 2/2 v3] at91: add sama5d3xek board support
smooth BrOperator
2013-01-30 8:40 UTC
[PATCH 0/2 v2] at91: add sama5d3 support
2013-01-29 13:39 UTC (3+ messages)
` [PATCH 1/2] "
` [PATCH 2/2] at91: add sama5d3xek board support
[PATCH 0/2] at91: add sama5d3 support
2013-01-29 11:14 UTC (5+ messages)
` [PATCH 1/2] "
` [PATCH 2/2] at91: add sama5d3xek board support
[PATCH] ARM: efika-mx-smartbook: clean up whitespaces
2013-01-29 9:01 UTC (2+ messages)
[PATCH 1/1] at91sam9m10ihd: set missing lcd power control
2013-01-29 9:01 UTC (2+ messages)
[PATCH 0/2] macb: sync with linux and prepare for gmac support
2013-01-29 9:00 UTC (4+ messages)
` [PATCH 1/2] macb: sync register access and clock with the kernel
` [PATCH 2/2] macb: allow to pass the phy interface
[PATCH 1/1] w1: add dual search support
2013-01-29 8:58 UTC (2+ messages)
[PATCH] ARM OMAP: move lowlevel board code to lowlevel.c
2013-01-29 8:49 UTC (7+ messages)
` [PATCH 1/6] ARM omap3 beagle: move lowlevel "
` [PATCH 2/6] ARM omap3 phycard-a-l1: "
` [PATCH 3/6] ARM omap3 omap343xdsp: "
` [PATCH 4/6] ARM omap3 omap3evm: "
` [PATCH 5/6] ARM am33xx beaglebone: "
` [PATCH 6/6] ARM omap3 beagle: Compile xload defconfig in Thumb2 mode
[PATCH] introduce compiletime loglevel
2013-01-29 8:45 UTC (13+ messages)
` [PATCH 01/12] consolidate print* in a single header
` [PATCH 02/12] mtd m25p80: consistenly switch to dev_* messages
` [PATCH 03/12] treewide: fix format specifiers
` [PATCH 04/12] nios2: Let readl return an unsigned int
` [PATCH 05/12] nios2: Use unsigned long for __kernel_size_t
` [PATCH 06/12] blackfin: "
` [PATCH 07/12] USB ehci: Use dev_* for messages
` [PATCH 08/12] introduce compile time loglevel
` [PATCH 09/12] introduce pr_fmt
` [PATCH 10/12] ARM mmu: Use pr_debug
` [PATCH 11/12] ARM pcm038: Specify pr_fmt and change messages to pr_*
` [PATCH 12/12] mtd nand: "
[PATCH 1/1] at91: add clock dump command
2013-01-28 14:38 UTC
[For-nex PATCH 0/8 v2] at91: add atmel lcdc framebuffer support
2013-01-28 9:26 UTC (6+ messages)
` [PATCH 1/8] video: add atmel lcdc frambuffer support
` [PATCH 6/8] at91sam9m10ihd: add lcd support
[PATCH 0/4] MIPS: introduce ram0 regions register function
2013-01-28 9:10 UTC (5+ messages)
` [PATCH 1/4] "
` Fwd: "
[PATCH 1/2] at91rm9200: fix default TEXT_BASE to 15MiB
2013-01-28 8:46 UTC (5+ messages)
` [PATCH 2/2] at91rm9200ek: fix mem size
[PATCH] Add new ARM entry point for barebox
2013-01-28 7:41 UTC (7+ messages)
` [PATCH 16/34] ARM clep7212: switch to barebox_arm_entry
` [PATCH 29/34] ARM: Factor out early mmu code
[PATCH 0/2] at91rm9200: sdram autodetect size
2013-01-28 7:33 UTC (2+ messages)
[PATCH 0/4] at91: sam9gx5/9g45/9n12 sd/ddrram autodetect size
2013-01-28 7:31 UTC (6+ messages)
` [PATCH 1/4] at91sam9x5: add autodetect sd/ddram size
` [PATCH 2/4] at91sam9n12: "
` [PATCH 3/4] at91sam9g45: "
` [PATCH 4/4] at91: Atmel ref board sam{9x5/9n12/m109g45} EK and Ronetix pm9g45 autodetect ddr size
[For-master PATCH 1/2] at91sam9n12: fix wp_pin invalid value
2013-01-28 7:30 UTC (2+ messages)
[PATCH 1/2] at91rm9200: add autodetect sdram size
2013-01-27 18:11 UTC (2+ messages)
` [PATCH 2/2] at91rm9200ek: auto detect "
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox