mail archive of the barebox mailing list
 help / color / mirror / Atom feed
[PATCH] introduce compiletime loglevel
 2013-01-29  8:45 UTC  (2+ messages)
` [PATCH 04/12] nios2: Let readl return an unsigned int

[PATCH 0/2] at91: add sama5d3 support
 2013-01-28 22:36 UTC  (3+ messages)
` [PATCH 1/2] "
  ` [PATCH 2/2] at91: add sama5d3xek board support

[PATCH 0/2] macb: sync with linux and prepare for gmac support
 2013-01-28 22:27 UTC  (3+ messages)
` [PATCH 1/2] macb: sync register access and clock with the kernel
  ` [PATCH 2/2] macb: allow to pass the phy interface

[PATCH 1/1] w1: add dual search support
 2013-01-28 22:23 UTC 

[PATCH 1/1] at91: add clock dump command
 2013-01-28 14:38 UTC 

[PATCH 1/1] at91sam9m10ihd: set missing lcd power control
 2013-01-28  9:32 UTC 

[PATCH] ARM OMAP: use SZ_*M constants in RAM device register functions
 2013-01-28  9:29 UTC  (2+ messages)

[For-nex PATCH 0/8 v2] at91: add atmel lcdc framebuffer support
 2013-01-28  9:26 UTC  (12+ messages)
` [PATCH 1/8] video: add atmel lcdc frambuffer support
  ` [PATCH 2/8] at91sam9263: "
  ` [PATCH 3/8] at91sam9261: "
  ` [PATCH 4/8] at91sam9g45: "
  ` [PATCH 5/8] at91sam9m10g45ek: add lcdc support
  ` [PATCH 6/8] at91sam9m10ihd: add lcd support
  ` [PATCH 7/8] at91sam9261ek: "
  ` [PATCH 8/8] at91sam9263ek: "

[PATCH] ARM: efika-mx-smartbook: clean up whitespaces
 2013-01-28  9:26 UTC 

[PATCH 0/3] pbl: factorise decompress code and add none compress support
 2013-01-28  9:26 UTC  (4+ messages)
` [PATCH 1/3] pbl: move configs to pbl/Kconfig
  ` [PATCH 2/3] pbl: factorise decompressor
  ` [PATCH 3/3] pbl: add none compression support

[PATCH 0/4] MIPS: introduce ram0 regions register function
 2013-01-28  9:10 UTC  (8+ messages)
` [PATCH 1/4] "
      ` Fwd: "
` [PATCH 2/4] MIPS: qemu-malta: use mips_add_ram0()
` [PATCH 3/4] MIPS: rzx50: "
` [PATCH 4/4] MIPS: dlink-dir-320: "

[PATCH 1/2] at91rm9200: fix default TEXT_BASE to 15MiB
 2013-01-28  8:46 UTC  (5+ messages)
` [PATCH 2/2] at91rm9200ek: fix mem size

[PATCH] Add new ARM entry point for barebox
 2013-01-28  7:41 UTC  (42+ messages)
` [PATCH 01/34] ARM: Add new "
` [PATCH 02/34] ARM: add __noreturn to board_init_lowlevel_return
` [PATCH 03/34] ARM i.MX: Use SRAM stack in lowlevel code
` [PATCH 04/34] ARM i.MX: Add i.MX specific entry point for barebox
` [PATCH 05/34] ARM i.MX: prepare external nand boot for SoC specific entry
` [PATCH 06/34] ARM i.MX boards: switch to barebox_arm_entry
` [PATCH 07/34] ARM MXS "
` [PATCH 08/34] ARM OMAP "
` [PATCH 09/34] ARM Samsung "
` [PATCH 10/34] ARM PXA "
` [PATCH 11/34] ARM ep93xx "
` [PATCH 12/34] ARM tegra "
` [PATCH 13/34] ARM nomadik "
` [PATCH 14/34] ARM versatile "
` [PATCH 15/34] ARM netx "
` [PATCH 16/34] ARM clep7212: "
` [PATCH 17/34] ARM raspberrypi: "
` [PATCH 18/34] ARM AT91 mmccpu: Fix non existing define
` [PATCH 19/34] ARM AT91: switch to barebox_arm_entry part1
` [PATCH 20/34] ARM AT91: switch at91rm9200 board to barebox_arm_entry
` [PATCH 21/34] ARM AT91: switch remaining boards "
` [PATCH 22/34] ARM: remove now unused MACH_[HAS|DO]_LOWLEVEL_INIT
` [PATCH 23/34] ARM start-pbl: make board_init_lowlevel_return static
` [PATCH 24/34] ARM start-pbl: call uncompressed binary with arguments
` [PATCH 25/34] ARM start: pickup parameters from pbl
` [PATCH 26/34] ARM: Setup stack at end of SDRAM
` [PATCH 27/34] ARM pbl: Use dynamic parameters for early malloc space
` [PATCH 28/34] ARM mmu: pickup already enabled mmu
` [PATCH 29/34] ARM: Factor out early mmu code
` [PATCH 30/34] ARM: Enable mmu early
` [PATCH 31/34] ARM: Automatically determine malloc size
` [PATCH 32/34] generic memory layout: fix deps for [MALLOC|STACK]_BASE
` [PATCH 33/34] ARM: disable HAVE_CONFIGURABLE_MEMORY_LAYOUT
` [PATCH 34/34] ARM pbl: inline decompress function

[PATCH 0/2] at91rm9200: sdram autodetect size
 2013-01-28  7:33 UTC  (2+ messages)

[PATCH 0/4] at91: sam9gx5/9g45/9n12 sd/ddrram autodetect size
 2013-01-28  7:31 UTC  (6+ messages)
` [PATCH 1/4] at91sam9x5: add autodetect sd/ddram size
  ` [PATCH 2/4] at91sam9n12: "
  ` [PATCH 3/4] at91sam9g45: "
  ` [PATCH 4/4] at91: Atmel ref board sam{9x5/9n12/m109g45} EK and Ronetix pm9g45 autodetect ddr size

[For-master PATCH 1/2] at91sam9n12: fix wp_pin invalid value
 2013-01-28  7:30 UTC  (3+ messages)
` [For-master PATCH 2/2] at91sam9x5ek: fix wp_pin and detect_pin pin "

[PATCH 1/2] at91rm9200: add autodetect sdram size
 2013-01-27 18:11 UTC  (2+ messages)
  ` [PATCH 2/2] at91rm9200ek: auto detect "

[PATCH 0/2] at91: bootstrap: add menu support
 2013-01-27 11:38 UTC  (5+ messages)
` [PATCH 1/2] menu: the dependancy on process escape is wrong drop it
  ` [PATCH 2/2] at91: bootstrap: add menu support

[PATCH 1/1] at91sam9261: fix max bare_init it's 156KiB
 2013-01-27 11:19 UTC  (2+ messages)

[PATCH 1/1] Animeo IP: use gpiolib ip to detect the hw version
 2013-01-27 11:19 UTC  (2+ messages)

[PATCH 0/7] globalvar: add multiple device support
 2013-01-27 10:56 UTC  (12+ messages)
` [PATCH 1/7] params: allow to access first sub-device and params via env
  ` [PATCH 2/7] globalvar: add it's own bus
  ` [PATCH 3/7] globalvar: allow to register multiple device
  ` [PATCH 4/7] net: switch to global device
  ` [PATCH 5/7] dhcp: switch globalvar to it's own device
  ` [PATCH 6/7] bootm: "
  ` [PATCH 7/7] bootargs: "

[PATCH 0/5] at91sam9261: add bootstrap and firstage support
 2013-01-26 23:14 UTC  (8+ messages)
` [PATCH 1/5] at91sam9260/9g20/9261/9g10/9263: split soc lowlevel_init from generic
  ` [PATCH 2/5] at91: introduce AT91_LOAD_BAREBOX_SRAM to specifcy which size load for external boot
  ` [PATCH 3/5] at91sam9261ek: add spi support
  ` [PATCH 4/5] at91sam9261ek: add boostrap support
  ` [PATCH 5/5] at91sam9261ek: add first stage support

[PATCH 1/1] gpio_keys: fix loop on buttons for request and configuration
 2013-01-26 22:14 UTC  (2+ messages)

[PATCH] spi: fix compiler warning
 2013-01-26 22:13 UTC  (2+ messages)

[PATCH] ARM AT91 pm9263: Fix phy address
 2013-01-26 11:26 UTC 

[PATCH] fix build warnings
 2013-01-26 11:23 UTC  (4+ messages)
` [PATCH 1/3] ARM bcm2835: Fix noreturn function does return
` [PATCH 2/3] ARM: Fix reassigning symbols in defconfigs
` [PATCH 3/3] pbl string: Fix no previous prototype warnings

[PATCH] arm-mmu: switch pte flags vars to lower case
 2013-01-25 18:51 UTC  (2+ messages)

[PATCH] ARM AT91 mmccpu: Fix non existing define
 2013-01-25 18:29 UTC 

[PATCH] of: Fix of_find_node_by_path breakage
 2013-01-25 18:25 UTC  (2+ messages)

[PATCH] defenv-2: source /env/config after /env/init/*
 2013-01-25 18:00 UTC  (2+ messages)

[PATCH 0/2] at91: add atmel at91sam9m10ihd tabel support
 2013-01-25 17:36 UTC  (4+ messages)
` [PATCH 1/2] at91sam9m10g45ek/defconfig: set board type
  ` [PATCH 2/2] at91: add at91sam9m10ihd tablet support

[PATCH 0/2] tny-a9263: add spi + bootstrap support
 2013-01-25 17:36 UTC  (4+ messages)
` [PATCH 1/2] tny-a9263: add dataflash support
  ` [PATCH 2/2] tny_a9263: add bootstrap support

[for master PATCH 00/14] atmel_mci: fixes and cleanup
 2013-01-25 17:35 UTC  (17+ messages)
` [PATCH 01/14] atmel_mci: rename atmel_mci_host tp atmel_mci
  ` [PATCH 02/14] atmel_mci: rename atmel_mci_readl/writel to atmci_readl/writel
  ` [PATCH 03/14] atmel_mci: rename all function to start with atmci
  ` [PATCH 04/14] atmel_mci: use linux regs define
  ` [PATCH 05/14] atmel_mci: detect IP version
  ` [PATCH 06/14] atmel_mci: version 0x5xx of the IP have a different clk div
  ` [PATCH 07/14] atmel_mci: fix host init
  ` [PATCH 08/14] atmel_mci: rwproof is only needed since IP version 0x200
  ` [PATCH 09/14] atmel_mci: on version 0x0 we need to reset the IP at each request
  ` [PATCH 10/14] atmel_mci: after a software timeout the IP need to be reset
  ` [PATCH 11/14] atmel_mci: support the SD highspeed since IP version 0x300
  ` [PATCH 12/14] atmel_mci: update the SD/SDIO Card Register at request time
  ` [PATCH 13/14] atmel_mci: drop board host caps
  ` [PATCH 14/14] atmel_mci: gpio: request and configure card detect

[for next PATCH 0/2] MMC: introduce write protect support
 2013-01-25 15:38 UTC  (3+ messages)
` [PATCH 1/2] mci: add card_write_protected
  ` [PATCH 2/2] atmel_mci: add write protect detection support

[PATCH v4] ARM: at91: Add Telit EVK-PRO3 board support
 2013-01-25 13:13 UTC  (2+ messages)

[PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support
 2013-01-25 12:30 UTC  (7+ messages)

[PATCH] defenv-2: migrate guf-vincell to config-board
 2013-01-25  9:30 UTC 

[For-next PATCH 0/2 v2] at91: add Somfy Animeo-IP support
 2013-01-24 21:11 UTC  (3+ messages)
` [PATCH 1/2] at91sam9260ek: specify mach entry
  ` [PATCH 2/2] at91: add Somfy Animeo IP support

[PATCH 0/2] at91: add Somfy Animeo-IP support
 2013-01-24 20:58 UTC  (3+ messages)
` [PATCH 1/2] at91sam9260ek: specify mach entry
  ` [PATCH 2/2] at91: add Somfy Animeo IP support

[PATCH v2] ARM: at91: Add Telit EVK-PRO3 board support
 2013-01-24 15:46 UTC  (4+ messages)

[PATCH] feature_list: a way to pass hardware info to the kernel
 2013-01-23 21:37 UTC  (3+ messages)

[PATCH v2 0/8] add new memtest command
 2013-01-23 20:55 UTC  (9+ messages)
` [PATCH 8/8] memtest: add rewritten "

[PATCH 0/2] console none support
 2013-01-23 20:49 UTC  (4+ messages)

[PATCH 0/2] ohci: fixes
 2013-01-23 19:28 UTC  (2+ messages)

page:  |  | latest

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox