[PATCH] mfd: mc13xxx: Use device->bus field for using appropriate mode
2013-02-25 4:34 UTC (2+ messages)
[PATCH] OMAP4 USB BOOT: remove double line endings
2013-02-24 18:15 UTC
[PATCH] ARM: pcm038: Remove duplicate imx27_barebox_entry() call
2013-02-24 14:42 UTC
[PATCH 1/7] ARM: pcm038: Select IIM by default
2013-02-24 12:32 UTC (8+ messages)
` [PATCH 2/7] ARM: pcm038: Fix serial number IIM-address
` [PATCH 3/7] ARM: pcm970: Fix bug with CompactFlash
` [PATCH 4/7] ARM: pcm970: Replace #ifdef with IS_ENABLED()
` [PATCH 5/7] ARM: i.MX27: Use DEVICE_ID_SINGLE for IIM, CCM and ESDCTL
` [PATCH 6/7] ARM: pcm038: Using "get_ram_size" for determine SRAM size
` [PATCH 7/7] ARM: pcm038: Update defconfig
[PATCH 1/1] phy: fix force mode
2013-02-24 9:34 UTC
[PATCH 1/1] smc911111: fix send and recv return value
2013-02-24 9:32 UTC
[PATCH v2 next 0/2] defenv2: complete move config-board out of /env/init
2013-02-23 16:47 UTC (10+ messages)
` [PATCH v2 next 1/2] defenv2: comment setting default values in /env/config
` [PATCH v2 next 2/2] ARM at91 telit-evk-pro3: move config-board out of /env/init
Quotation for Car Music EL lamp（sound activated equalizer）
2013-02-23 7:05 UTC
[For-next PATCH 1/1] switch more boards to lwl-y
2013-02-22 12:44 UTC
[PATCH] defenv2: comment setting default values in /env/config
2013-02-22 9:12 UTC
[PATCH 1/2] net: fec_imx: use dev_err and dev_warn instead of printf
2013-02-22 8:24 UTC (3+ messages)
` [PATCH 2/2] net: fec_imx: ensure constant timeout in fec_halt
[PATCH] defaultenv-2: add boot sequence
2013-02-22 8:20 UTC
[PATCH 1/2] hush: expand variables before globbing in for loops
2013-02-22 8:13 UTC (3+ messages)
` [PATCH 2/2] hush: implement $*
[PATCH 1/2] nandtest: use new pread and pwrite functions
2013-02-21 19:50 UTC (4+ messages)
` [PATCH 2/2] nandtest: fix length calculation
[RFC] Add system controller register driver (SYSCON)
2013-02-21 14:11 UTC (2+ messages)
[PATCH 1/2] Makefile.lib: introduce lwl-y for lowlevel code
2013-02-21 14:09 UTC (3+ messages)
` [PATCH 2/2] switch boards to lwl-y
[For master PATCH 1/1] grapric_utils: set_pixel only write 16bit in 16bit mode
2013-02-21 14:08 UTC (4+ messages)
[PATCH] imx_spi: fix bus-num setup
2013-02-21 14:08 UTC (2+ messages)
[PATCH] defaultenv-2: fix base/init/ps1: don't reload /env/config
2013-02-21 14:03 UTC (2+ messages)
[PATCH 1/3] env: add register_persistent_environment
2013-02-21 13:52 UTC (13+ messages)
` [PATCH v4 "
` [PATCH v4 2/3] imx23-olinuxino: swith to generic peristent env
` [PATCH v4 3/3] falconwing: switch "
[PATCH 1/1] Makefile: drop duplicate cmd_as_o_S support
2013-02-21 13:45 UTC (2+ messages)
[PATCH 1/2] net: fec_imx: ensure constant timeout in fec_halt
2013-02-21 13:28 UTC (4+ messages)
` [PATCH 2/2] net: imx_fec: fix RMII support for i.MX6
[PATCH] fix compiler warnings: use puts() instead of printf()
2013-02-21 13:26 UTC (2+ messages)
[PATCH 1/1] highbank: add wfi for poweroff
2013-02-21 13:23 UTC (4+ messages)
[PATCH 1/1] Makefile: x_flags prepare for apps support
2013-02-20 14:24 UTC (2+ messages)
[PATCH] ubiformat: open flash image readonly
2013-02-20 11:27 UTC
[PATCH] mtd: Do not write empty pages, UBI fix
2013-02-20 10:47 UTC (3+ messages)
` [PATCH 1/2] mtd: nand: do not write empty pages
` [PATCH 2/2] libubi: Use global mtd_all_ff function
[For master RFC] fix compiler warnings: use puts() instead of printf()
2013-02-20 9:34 UTC
[RFC PATCH v2 0/2] fs: add pread and pwrite functions
2013-02-19 20:30 UTC (7+ messages)
` [PATCH 1/2] fs: fix return type of read
` [PATCH 2/2] fs: add pread and pwrite functions
[For master PATCH v2] ARM: at91: use -EINVAL for invalid gpio on atmel_mci
2013-02-19 19:07 UTC (2+ messages)
[PATCH] integrate CFI Flash driver into mtd
2013-02-19 18:45 UTC (13+ messages)
` [PATCH 1/6] libmtd: rename functions from mtd_* to libmtd_*
` [PATCH 2/6] mtd: rename mtd file operations callback functions
` [PATCH 3/6] mtd: Add mtd_* functions
` [PATCH 4/6] mtd: Use mtd_* functions where appropriate
` [PATCH 5/6] mtd: implement mtd_lock and mtd_unlock
` [PATCH 6/6] nor flash: integrate into mtd
` [PATCH] "
[PATCH] at91sam9260/9g20ek: use -EINVAL for invalid gpio on atmel_mci
2013-02-19 10:30 UTC (4+ messages)
[PATCH] at91sam9260/9g20ek: refactor init_board script
2013-02-19 7:56 UTC (2+ messages)
[RFC] Add Generic GPIO driver
2013-02-19 7:34 UTC (7+ messages)
` Re[2]: "
[PATCH 1/1 v2] defaultenv-2: add boot sequence
2013-02-18 18:44 UTC
[PATCH 0/5 v4] add EFI GUID Partition Table support
2013-02-18 17:45 UTC (9+ messages)
` [PATCH 1/5] linux/types: import __aligned_x64 from the kernel
` [PATCH 2/5] filetype: add GPT support
` [PATCH 3/5] partitons: add framework
` [PATCH 4/5] disk: introduce partition name
` [PATCH 5/5] disk: partitions: add EFI GUID Partition Table
` [PATCH 5/5 v5] "
[PATCH 1/1] of: add do_fixup_by_compatible with u32 and string version
2013-02-18 17:44 UTC (3+ messages)
[PATCH 1/1] highbank: add power off support
2013-02-18 13:41 UTC (3+ messages)
[PATCH 1/1] defaultenv-2: add boot sequence
2013-02-18 9:57 UTC (2+ messages)
[PATCH] Make "dev_get_resource" publicly available
2013-02-18 8:22 UTC (2+ messages)
[PATCH] mfd: Using MFD_xx prefix for symbols
2013-02-18 8:21 UTC (2+ messages)
[PATCH] commands: automount: Added help string about "-d" option
2013-02-18 8:19 UTC (2+ messages)
[PATCH 1/1] login: disable input console if password wrong
2013-02-17 16:08 UTC
[PATCH 0/2] highbank: add of fixup
2013-02-16 18:23 UTC (3+ messages)
` [PATCH 1/2] highbank: move register value to include/mach
` [PATCH 2/2] highbank: add of fixup
[PATCH] cfa10036: Retrieve the RAM size at runtime
2013-02-16 15:53 UTC (5+ messages)
` [PATCH] Add warning above get_ram_size
` Re[2]: "
[PATCH 1/1] devfs: add symlink support
2013-02-16 11:35 UTC
[PATCH 0/5 v3] add EFI GUID Partition Table support
2013-02-16 11:29 UTC (13+ messages)
` [PATCH 1/5] linux/types: import __aligned_x64 from the kernel
` [PATCH 2/5] filetype: add GPT support
` [PATCH 3/5] partitons: add framework
` [PATCH 4/5] disk: introduce partition name
` [PATCH 5/5] disk: partitions: add EFI GUID Partition Table
[PATCH 1/1] hush: return exit code a real instead of 0/1 only
2013-02-15 19:14 UTC (4+ messages)
Environment changes lead to weird boot behaviour
2013-02-15 18:57 UTC (2+ messages)
[PATCH] fix compiler warnings
2013-02-15 18:48 UTC (4+ messages)
` [PATCH 1/3] ARM OMAP phycard-a-l1: Add missing include
` [PATCH 2/3] ARM at91sam9n12ek_defconfig: Fix reassigning of BAREBOX_MAX_IMAGE_SIZE
` [PATCH 3/3] ARM i.MX28: Add missing return value in non-void function
[PATCH] addpart: size and offset not needed for already defined partitions
2013-02-15 18:28 UTC (2+ messages)
[PATCH v3] at91sam9260/9g20ek: use IS_ENABLED instead of #if/#ifdef
2013-02-15 17:26 UTC (2+ messages)
[PATCH 1/1] commands/ubi.c: Add support for VID header offset in ubiattach
2013-02-15 16:58 UTC (4+ messages)
` "
[PATCH 1/2] ARM i.MX35: Fix device names for gpio
2013-02-15 15:43 UTC (2+ messages)
` [PATCH 2/2] ARM i.MX21: "
[PATCH] fix brown paper bag bug introduced with compile time loglevel
2013-02-15 15:39 UTC (2+ messages)
` [PATCH v2] "
[PATCH] clk-fixed-factor: Using parent flags
2013-02-15 12:28 UTC (2+ messages)
[PATCH 0/2] at91sam9260/9g20ek: cleanup and optimization
2013-02-15 11:14 UTC (7+ messages)
` [PATCH 1/2] at91sam9260/9g20ek: use IS_ENABLED instead of #if/#ifdef
` [PATCH 2/2] at91sam9260/9g20ek: remove #ifdef for ek_usb_add_device_mci()
[PATCH v2 0/2] at91sam9260/9g20ek: cleanup and optimization
2013-02-15 10:58 UTC (3+ messages)
` [PATCH v2 1/2] at91sam9260/9g20ek: use IS_ENABLED instead of #if/#ifdef
` [PATCH v2 2/2] at91sam9260/9g20ek: remove #ifdef for ek_usb_add_device_mci()
[PATCH 0/5] add EFI GUID Partition Table support
2013-02-15 10:56 UTC (6+ messages)
` [PATCH 1/5] linux/types: import __aligned_x64 from the kernel
` [PATCH 2/5] filetype: add GPT support
[PATCH 0/5] add EFI GUID Partition Table support
2013-02-15 10:47 UTC (10+ messages)
` [PATCH 1/5] linux/types: import __aligned_x64 from the kernel
` [PATCH 2/5] filetype: add GPT support
[PATCH] Add missing SZ_xx defines
2013-02-15 8:51 UTC (4+ messages)
` Re[2]: "
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox