[PATCH 1/2] ARM: ccmx51: Migrate to defaultenv-2
2013-03-14 10:40 UTC (2+ messages)
` [PATCH 2/2] arm: ccmx51: Using imx51_add_usbotg() function for register USB
[PATCH 4/5] gadget: possible null pointer dereference fix
2013-03-14 10:34 UTC (4+ messages)
[RFC PATCH 1/2] AM33XX: Move muxing defines to header file
2013-03-14 9:35 UTC (4+ messages)
` [RFC PATCH 2/2] AM33XX: pcm051: Create custom mux file
[PATCH] ARM i.MX ESDCTL: Fix default enabled esdctl v2 controller
2013-03-14 8:03 UTC
[PATCH 0/9] Add support for booting ArchosG9 from sd-card
2013-03-14 7:50 UTC (21+ messages)
` [PATCH 2/9] omap4_romusb: rename omap4_usbboot_pdata to omap4_usbboot_data
` [PATCH 3/9] omap_uart: rename OMAP3EVM_UARTx to OMAP_UARTx
` [PATCH 4/9] omap_uart: add low level port serial initialization
` [PATCH 5/9] panda: remove unused configuration items
` [PATCH 6/9] omap4_romusb: allow adding usb-serial when not booting from usb
` [PATCH 7/9] menu: avoid errors when building submenus
` [PATCH 8/9] archos: add atag appender for all features
` [PATCH 9/9] archosg9: enable booting from sd-card
[PATCH 1/5] at91: debug unit typo fix
2013-03-14 7:37 UTC (2+ messages)
Loading kernel from SPI NOR
2013-03-14 7:26 UTC (2+ messages)
[PATCH 1/1] macb: fix gem_recv circular buffer handling
2013-03-13 19:13 UTC (2+ messages)
[PATCH 0/7 v2] globalvar: add multiple device support
2013-03-13 18:05 UTC (8+ messages)
` [PATCH 1/7] params: allow to access first sub-device and params via env
` [PATCH 2/7] globalvar: add it's own bus
` [PATCH 3/7] globalvar: allow to register multiple device
` [PATCH 4/7] net: switch to global device
` [PATCH 5/7] dhcp: switch globalvar to it's own device
` [PATCH 6/7] bootm: "
` [PATCH 7/7] bootargs: "
[PATCH] net: macb: initialize is_gem before usage
2013-03-13 15:39 UTC (2+ messages)
[PATCH 1/2] net: macb: remove gem_recv and reorder probe
2013-03-13 15:36 UTC (12+ messages)
` [PATCH 2/2] net: macb: turn off endian_swp_pkt_en
[PATCH 5/5] dfu: usb reset state workaround
2013-03-13 13:46 UTC
[PATCH 3/5] at91udc: fix recursive poll()
2013-03-13 13:43 UTC
[PATCH 2/5] at91udc: startup fix
2013-03-13 13:41 UTC
[PATCH 6/7] DFU : disable state fix
2013-03-13 12:17 UTC (3+ messages)
[PATCH 5/7] gadget: possible null pointer dereference fix
2013-03-13 10:32 UTC (2+ messages)
[PATCH 4/7] AT91 UDC, fix recursive poll()
2013-03-13 10:31 UTC (2+ messages)
[PATCH 3/7] AT91 UDC startup fix
2013-03-13 10:29 UTC (2+ messages)
[PATCH 1/7] AT91 debug unit typo fix
2013-03-13 10:14 UTC (3+ messages)
[PATCH] [ARM] imx1: add #define to configure frequency for the clk32
2013-03-13 8:58 UTC
New dt-only arm/mach
2013-03-13 4:39 UTC (9+ messages)
` Re[2]: "
[PATCH 2/4] twl6030: add power button as an input key
2013-03-12 23:07 UTC (7+ messages)
` [PATCH 3/4] OMAP4: add command to select next boot device priority
[PATCH 1/1] defaultenv-2: move settings in a submenu
2013-03-12 20:48 UTC
[PATCH 1/1] splash: fix background color support
2013-03-12 19:59 UTC
[PATCH] usb/gadget/Kconfig: fix menu
2013-03-12 18:29 UTC (4+ messages)
[PATCH RESEND] usb: chipidea-imx: Fix usb initialization
2013-03-12 17:02 UTC
[PATCH 2/7] Watchdog driver for AT91SAM9 SOC
2013-03-12 16:50 UTC (2+ messages)
[PATCH 7/7] none
2013-03-12 16:39 UTC
[PATCH 0/9] ARM: add support for Zynq
2013-03-12 13:42 UTC (21+ messages)
` [PATCH 1/9] serial: Add driver for Cadence UART
` [PATCH 2/9] ARM: Zynq: Add new architecture zynq
` [PATCH 3/9] ARM: zynq: add zynq fsbl checksum script
` [PATCH 4/9] ARM: zynq: Add support for the Avnet Zedboard
` [PATCH 5/9] ARM: zynq: add clk support for zynq7000
` [PATCH 6/9] ARM: zynq: clk: replace define with header
` [PATCH 7/9] ARM: zynq: clk: add pll type
` [PATCH 8/9] ARM: zynq: clk: convert to platform driver
` [PATCH 9/9] ARM: zynq: remove clocksource
[PATCH] fix i.MX external NAND boot bad block handling
2013-03-12 10:08 UTC (9+ messages)
` [PATCH 1/4] ARM: i.MX: external nand boot: check for bad blocks
` [PATCH 2/4] ARM: head: Add some space behind the image header
` [PATCH 3/4] ARM: i.MX: Add bbu handler for external NAND boot
` [PATCH 4/4] ARM: i.MX pcm043: register external nand boot handler
[PATCH 0/4] ArchosG9: add keyboard input and new reset menu entries
2013-03-12 0:09 UTC (9+ messages)
` [PATCH 1/4] gpio_keys: detect keys pressed before booting
` [PATCH 2/4] twl6030: add power button as an input key
` [PATCH 3/4] OMAP4: add command to select next boot device priority
` [PATCH 4/4] ArchosG9: add keyboard input and new reset menu entries
[PATCH 8/9] archos: add atag appender for all features
2013-03-11 22:24 UTC
[PATCH 01/13] ARM: clep7212: Migrate to config-board
2013-03-11 21:18 UTC (22+ messages)
` [PATCH 02/13] ARM: clps711x: Fix setup bus wait state scaling factor for 13Mhz mode
` [PATCH 03/13] ARM: clps711x: Replace numeric PLL option with boolean for raise CPU frequency
` [PATCH 04/13] ARM: clps711x: Add clocksource driver
` Re[2]: "
` [PATCH 05/13] ARM: clps711x: Using COMMON_CLK
` Re[2]: "
` [PATCH 06/13] Add Generic GPIO driver
` [PATCH 07/13] ARM: clps711x: Add "
` [PATCH 08/13] Add helpers to define resources
` [PATCH 09/13] ARM: clps711x: Migrate to using DEFINE_RES_MEM macro
` [PATCH 10/13] ARM: clps711x: Limit chipselect setup up to CS5
` [PATCH 11/13] Add system controller register driver (SYSCON)
` [PATCH 12/13] ARM: clps711x: Export system-wide registers through SYSCON driver
` [PATCH 13/13] serial: clps711x: Migrate to using "
[PATCH] Add dtc
2013-03-11 21:01 UTC (5+ messages)
` [PATCH 2/5] Makefile.lib: Add dtc support
` [PATCH 3/5] ARM: Initial dts support
` [PATCH 4/5] ARM: Add initial i.MX27 dts files
` [PATCH 5/5] drivers: Bail out if dev_request_mem_region fails
[PATCH 1/2] Makefile: Create empty <config.h> if this header file is not needed by board
2013-03-11 16:10 UTC (2+ messages)
` [PATCH 2/2] Remove unused config.h
[RFC] Makefile: Create empty <config.h> if this header file is not needed by board
2013-03-11 16:10 UTC (6+ messages)
` Re[2]: "
[PATCH] image and bss size decrease
2013-03-11 9:08 UTC (4+ messages)
[PATCH v2] DMO Realq7 support
2013-03-11 8:23 UTC (5+ messages)
` [PATCH 1/4] net: phy: micrel: Update id table from kernel
` [PATCH 2/4] ARM i.MX6: Add mmdc calibration support
` [PATCH 3/4] Add DMO RealQ7 board support
` [PATCH 4/4] Add DMO RealQ7 defconfig
[PATCH] net: fec: Use standard phy type defines
2013-03-11 7:53 UTC (3+ messages)
Question about OMAP4 boot priorities
2013-03-11 0:43 UTC
[PATCH] usb: chipidea-imx: Fix usb initialization
2013-03-10 23:17 UTC (2+ messages)
[PATCH] misc cleanups
2013-03-10 10:19 UTC (5+ messages)
` [PATCH 1/4] include asm/sections.h instead of asm-generic/sections.h
` [PATCH 2/4] MMC i.MX: remove unnecessary mach include
` [PATCH 3/4] ARM i.MX: Add double include protection for generic.h
` [PATCH 4/4] ARM: Add missing barebox_arm_boarddata function
[PATCH 0/7] Rework current Tegra support
2013-03-10 9:53 UTC (9+ messages)
` [PATCH v2 0/5] "
` [PATCH v2 3/5] tegra: add driver for the clock and reset module
` [PATCH v2 4/5] tegra: add proper timer driver
` [PATCH v2 5/5] tegra: add power management controller driver
[PATCH v2 1/6] Extend device_platform_driver macro
2013-03-10 6:41 UTC (6+ messages)
` [PATCH v2 2/6] Add more drivers to using device_platform_driver()
` [PATCH v2 3/6] Introduce console_platform_driver() macro and use it for serial drivers
` [PATCH v2 4/6] SPI: Rename spi_register_driver() for using with register_driver_macro()
` [PATCH v2 5/6] I2C: Rename i2c_register_driver() "
` [PATCH v2 6/6] Introduce device_spi_driver() macro and use it for SPI drivers
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox