[PATCH 1/3] cfi: remove unused field from struct flash_info
2013-05-27 8:55 UTC
[PATCH] MCI patches
2013-05-27 8:52 UTC (8+ messages)
` [PATCH 1/7] driver: Attach info callback to device, not to driver
` [PATCH 2/7] mci: make mci device a pure device
` [PATCH 3/7] mci: embed mci device into struct mci
` [PATCH 4/7] mci: set name of mci device to same name as the filename
` [PATCH 5/7] of: Add of_alias_get function
` [PATCH 6/7] mci: imx-esdhc: allow to specify devicename via OF alias
` [PATCH 7/7] ARM: i.MX51: Add aliases for MMC controllers
[PATCH] mtd: call mtd_erase with complete area if possible
2013-05-27 8:38 UTC
[PATCH 0/2] cfi fixes
2013-05-27 8:30 UTC (7+ messages)
` [PATCH 1/2 v2] cfi_flash: add shift option for some cfi memory chips
` [PATCH 2/2] cfi_flash: size_ratio should not be 0
[PATCH] ARM i.MX53: tqma53: fix console entry
2013-05-27 7:51 UTC (2+ messages)
Unable to Boot from NAND on Mini2440
2013-05-27 7:26 UTC (5+ messages)
MIPS: XBurst: rzx50: enable pbl support
2013-05-26 11:27 UTC (4+ messages)
` [PATCH 1/3] MIPS: rzx50: add trivial board_pbl_start
` [PATCH 2/3] MIPS: XBurst: enable pbl support
` [PATCH 3/3] MIPS: rzx50: enable pbl in defconfig
[RFC, PATCH v2 0/3] work on atheros ar2313
2013-05-25 15:57 UTC (9+ messages)
` [RFC, PATCH v2 1/3] MIPS: add Atheros ar531x family support
` [RFC, PATCH v2 2/3] net: add ar231x-eth support
` [RFC, PATCH v2 3/3] MIPS: ar231x: add netgear-wg102
[PATCH] ARM: i.MX51: PLL errata workaround
2013-05-25 13:35 UTC
[PATCH] Make dependency fixes
2013-05-25 13:32 UTC (5+ messages)
` [PATCH 1/4] pbl: Fix typo in make causing pbl files to be rebuilt
` [PATCH 2/4] ARM: pbl: fix make dependencies
` [PATCH 3/4] make: Add barebox_default_env.* to targets
` [PATCH 4/4] ARM: zynq: Add cmd to generate zynq image
[RFC, EXPERIMENTAL] MIPS: add initial cache support
2013-05-24 10:47 UTC
[PATCH] ARM: cfa10036: Add more board ID for boot time detection
2013-05-24 6:34 UTC (2+ messages)
[PATCH] imx-image support
2013-05-24 6:34 UTC (4+ messages)
` [PATCH 1/3] ARM: Makefile: Make sure to clean boarddirs
` [PATCH 2/3] scripts: Add imx-usb-loader tool
` [PATCH 3/3] ARM: i.MX51 babbage: switch to imx-image
[PATCH] net: fec_imx: default phy address to -1 for dt probe
2013-05-23 13:58 UTC
[PATCH] MCI: support boot partitions
2013-05-23 13:56 UTC (4+ messages)
` [PATCH 1/3] param: Add info function
` [PATCH 2/3] param: Add helpers to provide an enum parameter
` [PATCH 3/3] mci: Add support for MMC boot partitions
[PATCH 1/2] arm: am33xx: add pinmux and clock config for UART2
2013-05-23 13:38 UTC (3+ messages)
` [PATCH 2/2] arm: am33xx: add pinmux config for RMII2
[PATCH] mtd-core: fix mtd erase operation for non-uniform flashes
2013-05-23 13:27 UTC (2+ messages)
imx31 bcb
2013-05-23 13:19 UTC (2+ messages)
2013.05 breaking Linux boot on imx28 CFA-10036
2013-05-23 13:16 UTC (5+ messages)
stable releases
2013-05-23 12:47 UTC
[PATCH] defaultenv-2: Fix settings entry
2013-05-23 7:56 UTC (2+ messages)
[RFC] MXS/i.MX23: detecting the boot source
2013-05-23 7:54 UTC (5+ messages)
` [PATCH] MXS/i.MX23: add boot source detection
[PATCH v2] mci i.MX esdhc: Fix clock divider calculation
2013-05-23 7:17 UTC (2+ messages)
[PATCH urgent] ARM: fix the memset fix
2013-05-23 6:32 UTC (2+ messages)
[PATCH] mci i.MX esdhc: Fix clock divider calculation
2013-05-22 7:46 UTC (3+ messages)
[PATCH] move the first i.MX board over to devicetree
2013-05-21 17:53 UTC (13+ messages)
` [PATCH 01/10] ARM: i.MX: remove unused .mac_addr_base in iim
` [PATCH 02/10] ARM: i.MX: iim: Add devicetree probe support
` [PATCH 03/10] ARM: i.MX51: Add devicetree files
` [PATCH 04/10] ARM: i.MX51: Add IIM devicetree node
` [PATCH 05/10] ARM: i.MX51: Fixup fec pads in dts
` [PATCH 06/10] ARM: i.MX51: skip devices register when devicetree is present
` [PATCH 07/10] ARM: i.MX51 babbage: Add spi-cs-high property to pmic
` [PATCH 08/10] ARM: i.MX51 babbage: provide MAC adress in devicetree
` [PATCH 09/10] ARM: i.MX51 babbage: Add phy reset gpio to dts
` [PATCH 10/10] ARM: i.MX51 babbage: switch to devicetree
[PATCH 00/11] arm: mvebu: SoC consolidation
2013-05-21 17:49 UTC (23+ messages)
` [PATCH 01/11] arm: mvebu: add more visible SoC separators to Kconfig
` [PATCH 02/11] arm: mvebu: introduce common lowlevel and early init
` [PATCH 03/11] arm: mvebu: introduce common console UART config
` [PATCH 04/11] arm: mvebu: convert Dove to common init
` [PATCH 05/11] arm: mvebu: convert Armada 370/XP "
` [PATCH 06/11] arm: mvebu: convert Kirkwood "
` [PATCH 07/11] arm: mvebu: convert SolidRun CuBox "
` [PATCH 08/11] arm: mvebu: convert Globalscale Mirabox "
` [PATCH 09/11] arm: mvebu: convert PlatHome OpenBlocks AX3 "
` [PATCH 10/11] arm: mvebu: convert Marvell Armada XP GP board "
` [PATCH 11/11] arm: mvebu: convert Globalscale Guruplug "
[PATCH v2] nand_base: sync flash detection functions with linux 3.9's code
2013-05-21 17:41 UTC (7+ messages)
[PATCH] misc oftree patches
2013-05-21 7:38 UTC (6+ messages)
` [PATCH 1/5] pinctrl: imx-iomux-v3: only register pinctrl when device node is available
` [PATCH 2/5] spi: improve devicetree support
` [PATCH 3/5] mtd: dataflash: Add devicetree probing support
` [PATCH 4/5] net: Add of_register_ethaddr
` [PATCH 5/5] net: fec: Add imx25 compatible property
(no subject)
2013-05-21 6:49 UTC (8+ messages)
` [PATCH 1/5] i2c: Add missing result check
` [PATCH 2/5] i2c: remove dead code
` [PATCH 3/5] i2c: Add support for dynamic i2c bus numbers
` [SPAM] "
` [PATCH 4/5] i2c: Add devicetree support
` [PATCH 5/5] i2c: fsl: Add devicetree probe support
[PATCH] ARM: invalidate data caches during early init
2013-05-20 15:21 UTC (4+ messages)
[PATCH] devicetree misc updates
2013-05-20 14:14 UTC (9+ messages)
` [PATCH 1/8] ARM: dtb: Add $(obj)/$(BUILTIN_DTB).dtb.S as secondary target
` [PATCH 2/8] ARM: build dtbs during build process using extra-y
` [PATCH 3/8] scripts: fixdep: update from v3.10-rc1
` [PATCH 4/8] kbuild: always run gcc -E on *.dts, remove cmd_dtc_cpp
` [PATCH 5/8] of: When checking for existing devices also check resource end
` [PATCH 6/8] of: Call of_add_memory from of_probe
` [PATCH 7/8] of: Add of_match_node function
` [PATCH 8/8] of: populate devices based on "simple-bus" property
[PATCH] at91: add Calao QIL-A9G20
2013-05-20 14:03 UTC (3+ messages)
[PATCH] of: add ranges address translation for default bus
2013-05-19 15:20 UTC (6+ messages)
[PATCH 1/3] ARM v7: fix mmu-off operation
2013-05-17 9:22 UTC (6+ messages)
` [PATCH 3/3] ARM v7: added v7_mmu_cache_invalidate()
[PATCH v2] GPIO: Add gpio_to_desc helper
2013-05-17 5:46 UTC (2+ messages)
[PATCHv2 00/10] kwbimage improvements, Kirkwood support
2013-05-17 5:41 UTC (13+ messages)
` [PATCHv2 01/10] scripts/kwbimage: add a new function image_count_options()
` [PATCHv2 02/10] scripts/kwbimage: add a few sanity checks
` [PATCHv2 03/10] scripts/kwbimage: make the v0 image creation more flexible
` [PATCHv2 04/10] scripts/kwbimage: simplify the v1 image creation
` [PATCHv2 05/10] scripts/kwbimage: make image_boot_mode_id() return -1 on failure
` [PATCHv2 06/10] scripts/kwbimage: add support for NAND ECC and page size header fields
` [PATCHv2 07/10] arm: mvebu: add Feroceon CPU type
` [PATCHv2 08/10] arm: mvebu: initial support for Marvell Kirkwood SoCs
` [PATCHv2 09/10] arm: mvebu: add basic support for Globalscale Guruplug board
` [PATCHv2 10/10] arm: mvebu: remove useless lines in kwbimage.cfg for CuBox
[PATCH 1/5] ARM: at91: dt: use #include for all device trees
2013-05-15 14:03 UTC (5+ messages)
` [PATCH 2/5] ARM: at91: dt: switch to standard GPIO flag defines
` [PATCH 3/5] ARM: at91: dt: add pinctrl pre-processor define
` [PATCH 5/5] ARM: at91: dt: switch to standard IRQ flag defines
[PATCH 0/5] Initial support for Marvell Dove SoCs
2013-05-15 8:19 UTC (14+ messages)
` [PATCH 3/5] arm: initial "
[PATCH 1/1] Revert "nand_base: detect more ONFI flash"
2013-05-15 7:50 UTC (7+ messages)
` Re[2]: "
` Re[3]: "
[PATCH] ARM: ccmx51: Another fix SDRAM size detection
2013-05-15 7:25 UTC (2+ messages)
[PATCH] ARM i.MX6: set imx6 silicon revision
2013-05-15 6:51 UTC (2+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox