[PATCH 1/3] usb-imx28: fix enable
2013-09-10 17:57 UTC (2+ messages)
` [PATCH 2/3] imx28-regs: i.MX28 has 2 USB controllers
[PATCH 1/4] mxs_spi: unbreak driver
2013-09-10 17:13 UTC (4+ messages)
` [PATCH 2/4] nand_mxs: fix on i.MX28
` [PATCH 3/4] video/stm: don't fail when the pixel clock is properly set
` [PATCH 4/4] video/stm: enable clock to get the display working
[PATCH] gpio: Add designware gpio controller support
2013-09-10 8:56 UTC (4+ messages)
[PATCH] i.MX28: unbreak ethernet
2013-09-10 8:15 UTC
[PATCH v2] gpio: Add designware gpio controller support
2013-09-10 8:10 UTC
[PATCH / RFC] MCI: imx-esdhc: implement workaround for errata ENGcm12360
2013-09-10 6:57 UTC (2+ messages)
[PATCH] cfa10036: fix warning
2013-09-10 6:23 UTC (2+ messages)
[PATCH 1/2] mxs_spi: fix compile error
2013-09-10 6:22 UTC (3+ messages)
` [PATCH 2/2] serial_auart: "
imx-usb-image write to usb error
2013-09-09 17:41 UTC (3+ messages)
[PATCH v2 0/4] Update P2020RDB board support to allow NFS booting
2013-09-09 15:08 UTC (9+ messages)
` [PATCH 1/4] of: base: import of_find_node_by_type
` [PATCH 2/4] ppc: add and update device tree fixup functions
` [PATCH 3/4] ppc: bootm: relocate fdt to valid boot memory
` [PATCH 4/4] ppc: P2020RDB configuration update
[PATCH] mci: add designware mmc controller support
2013-09-09 14:54 UTC
[PATCH] net: designware patches
2013-09-09 14:53 UTC (7+ messages)
` [PATCH 1/6] net: designware: Fix broken cache invalidate
` [PATCH 2/6] net: designware: drop HAS_DESIGNWARE_ETH
` [PATCH 3/6] net: designware: use dma_alloc for descriptors
` [PATCH 4/6] net: designware: make alt/enhanced descriptor runtime configurable
` [PATCH 5/6] net: designware: Add decvicetree support
` [PATCH 6/6] net: designware: remove backspaces from code
[PATCH 0/2] defaultenv-2: add login support
2013-09-06 7:06 UTC (4+ messages)
` [PATCH 1/2] login: add globalvar timeout support
` [PATCH 2/2] defaultenv-2: add login support
[PATCH] MIPS: qemu-malta: switch to devicetree
2013-09-04 20:36 UTC (7+ messages)
v2013.09.0 and v2013.08.1
2013-09-04 7:43 UTC
[PATCH 4/4] ARM: support for CPO Science DataCollector II
2013-09-04 7:25 UTC (5+ messages)
[PATCH 3/4] small tweeks to build system for compatibility on MacOS X
2013-09-04 7:12 UTC (2+ messages)
[PATCH 1/1] arm: mmu: catch NULL pointer dereferences
2013-09-04 7:07 UTC (4+ messages)
[PATCH 1/4] mtd: fix erasesize math for non power-of-2 devices
2013-09-04 6:24 UTC (4+ messages)
[PATCH v2] mtd: fix erasesize math for non power-of-2 devices
2013-09-04 0:16 UTC
[PATCH v2] mtd: fix erasesize math for non power-of-2 devices
2013-09-03 22:09 UTC
[PATCH] PCM051: Fix muxing of MMC0 CD
2013-09-03 18:01 UTC (2+ messages)
[PATCH 2/4] AT91: move have_intensity_bit into board setup
2013-09-03 16:36 UTC (5+ messages)
[PATCH 0/4] ARM: support for CPODC2 board
2013-09-03 2:22 UTC
[PATCH 0/4] Update P2020RDB board support to allow NFS booting
2013-09-02 16:34 UTC (7+ messages)
` [PATCH 1/4] of: base: import of_find_node_by_type
` [PATCH 2/4] ppc: add mpc85xx device tree fixup functions
` [PATCH 3/4] ppc: bootm: relocate fdt to valid boot memory
` [PATCH 4/4] ppc: P2020RDB configuration update
[PATCH 1/1] bootm: add global bootm.{image/initrd}.loadaddr support
2013-09-02 9:08 UTC (2+ messages)
[PATCH] commands: Fix memtest return value
2013-09-02 8:50 UTC (2+ messages)
[PATCH 1/3 for next] AM33xx: Cleanup of lowlevel code
2013-09-02 8:23 UTC (6+ messages)
` [PATCH 2/3 for next] PCM051: Clean up "
` [PATCH 3/3 for next] beaglebone: "
[PATCH] i2c-omap: fix am33xx fclk_rate
2013-08-31 10:03 UTC (3+ messages)
` [PATCHi v2] i2c-omap: fix am33xx and omap3 fclk_rate
[PATCH] net/phy: support of mmd register read and write
2013-08-31 10:01 UTC (2+ messages)
[PATCH for next] PCM051: Fixup DDRPLL
2013-08-31 10:00 UTC (2+ messages)
bareboxenv on userspace - wrong crc on env
2013-08-30 2:29 UTC (5+ messages)
[PATCH] i.MX53: add imx53_add_mmc3
2013-08-28 9:10 UTC (2+ messages)
[RFC 0/8] barebox on Canon cameras: serial console and dts support
2013-08-27 7:00 UTC (17+ messages)
` [RFC 1/8] ARM: add very initial support for Canon DIGIC chips
` [RFC 2/8] serial: add driver for Canon DIGIC UART
` [RFC 3/8] gpio: add driver for Canon DIGIC
` [RFC 4/8] ARM: DIGIC: add Canon PowerShot A1100 IS support
` [RFC 5/8] ARM: DIGIC: add canon-a1100_defconfig
` [RFC 6/8] ARM: DIGIC: add csrc-dummy
` [RFC 7/8] ARM: DIGIC: add Canon EOS 600D support
` [RFC 8/8] ARM: DIGIC: add canon-600d_defconfig
[PATCH] am33xx beaglebone and related
2013-08-26 12:00 UTC (24+ messages)
` [PATCH 01/22] console: fix console without CONFIG_PARAMETER
` [PATCH 02/22] mci: omap: advertise 8 bit support
` [PATCH 03/22] mci: omap: implement device detect callback
` [PATCH 04/22] mci: omap: Allow to set mmc devname via platformdata
` [PATCH 05/22] ARM: omap: Allow to set mmc devname used for booting
` [PATCH 06/22] ARM: omap: fix omap_save_bootinfo
` [PATCH 07/22] ARM: omap: rename INIT_LL to omap_uart_lowlevel_init
` [PATCH 08/22] ARM: am33xx: Cleanup of lowlevel code
` [PATCH 09/22] ARM: pcm051: Clean up "
` [PATCH 10/22] ARM: beaglebone: "
` [PATCH 11/22] ARM: am33xx: set bootsource instance correctly for MMC1
` [PATCH 12/22] ARM: cpuinfo: display the core name and version
` [PATCH 13/22] ARM: am33xx: implement cpu revision decoding
` [PATCH 14/22] ARM: am33xx: beaglebone: configure I2C EEPROM
` [PATCH 15/22] ARM: am33xx: Add mmc1 registration helper
` [PATCH 16/22] ARM: am33xx: make DDR PLL frequency configurable
` [PATCH 17/22] rework debug_ll
` [PATCH 18/22] ARM: beaglebone: Initialize UART for lowlevel debugging
` [PATCH 19/22] ARM: beaglebone: add support for beaglebone black with DDR3 RAM
` [PATCH 20/22] ARM: beaglebone: register sd/emmc with persistent name
` [PATCH 21/22] ARM: beaglebone: update mlo_small defconfig
` [PATCH 22/22] ARM: beaglebone: update defconfig
[PATCH] mci: sdhci: fix IRQSTAT_DMAE bit shift
2013-08-26 7:04 UTC (2+ messages)
[PATCH] ARM: OMAP: PCM051: Remove spi platform data
2013-08-26 7:02 UTC (2+ messages)
[PATCH v2 1/2] ARM: omap: barebox update spi nor MLO handler
2013-08-26 6:59 UTC (3+ messages)
` [PATCH v2 2/2] PCM051: Added barebox update SPI NOR "
[PATCH 1/2] ARM: omap: barebox update spi nor MLO handler
2013-08-23 6:46 UTC (3+ messages)
` [PATCH 2/2] PCM051: Added barebox update SPI NOR "
Porting BareBox to Variscite iMX6 SOM
2013-08-22 21:09 UTC (6+ messages)
[PATCH] OMAP fixes and beaglebone black support
2013-08-22 20:36 UTC (9+ messages)
` [PATCH 1/8] ARM: am33xx: Add SRAM0 address/size defines
` [PATCH 2/8] ARM: omap: fix omap_save_bootinfo
` [PATCH 3/8] ARM: am33xx: Make uart0 mux init callable during early init
` [PATCH 4/8] ARM: cpuinfo: display the core name and version
` [PATCH 5/8] ARM: am33xx: implement cpu revision decoding
` [PATCH 6/8] ARM: am33xx: beaglebone: split out DDR2 init for BB White
` [PATCH 7/8] ARM: am33xx: beaglebone: configure I2C EEPROM
` [PATCH 8/8] ARM: am33xx: beaglebone: add support for beaglebone black with DDR3 RAM
[PATCH 1/2] ARM: i.MX: move esdctl device registration to soc_init
2013-08-22 7:08 UTC (4+ messages)
` [PATCH 2/2] ARM: dts: imx53 qsb: remove wrong memory bank
` [SPAM] "
[PATCH] AM33xx: Make OSC frequency board depended
2013-08-22 7:04 UTC (3+ messages)
uImage doesn't boot
2013-08-22 6:46 UTC (2+ messages)
Porting BareBox to Variscite iMX6 SOM
2013-08-21 15:48 UTC
Porting BareBox to Variscite iMX6 SOM
2013-08-21 8:28 UTC (2+ messages)
[PATCH 1/1] ubi: ubi_volume_cdev_read: use pr_debug for debug info
2013-08-19 8:58 UTC (2+ messages)
[PATCH] cleanup gpio includes
2013-08-17 9:25 UTC (9+ messages)
` [PATCH 1/8] ARM: AT91: Add missing include
` [PATCH 2/8] ARM: include <gpio.h> instead of <mach/gpio.h>
` [PATCH 3/8] ARM: i.MX23: Fix double include protection
` [PATCH 4/8] ARM: AT91: move iomux definitions to iomux.h
` [PATCH 5/8] ARM: MXS: "
` [PATCH 6/8] ARM: Samsung: "
` [PATCH 7/8] ARM: i.MX: "
` [PATCH 8/8] ARM: remove include of mach/gpio.h for gpiolib users
[PATCH 0/3] Marvell MVEBU OF clock providers
2013-08-16 14:00 UTC (2+ messages)
Porting BareBox to Variscite iMX6 SOM
2013-08-16 11:37 UTC (3+ messages)
PCM038 USB is broken again
2013-08-16 8:01 UTC (6+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox