[PATCH 1/3] import linux __iowrite32/64_copy support
2017-03-09 10:31 UTC (2+ messages)
` [PATCH 2/3] x86: add __raw_read{b,w,l,q} and __raw_write{b,w,l,q}
[PATCH 1/2] parameter: fix read only int support
2017-03-09 9:57 UTC (2+ messages)
` [PATCH 2/2] video: some framebuffer such as efi does support enable/disable
[PATCH 0/2] add support of efi Serial IO and Graphics Output Protocol
2017-03-09 8:49 UTC (8+ messages)
` [PATCH 1/2] video: add EFI Graphics Output Protocol support
` [PATCH 2/2] efi: add serial driver support
` [PATCH 2/2 v2] "
[PATCH 1/2] usb: gadget: print a meaningful error message
2017-03-09 8:37 UTC (2+ messages)
` [PATCH 2/2] usb: gadget: properly release f_multi_opts
[PATCH 1/2] usb: imx: role_registered contains role
2017-03-09 8:33 UTC (2+ messages)
` [PATCH 2/2] usb: imx: Fix setting of dev->priv
[PATCH 00/20] AT91, at91sam9x5ek updates (part I/III)
2017-03-09 7:19 UTC (22+ messages)
` [PATCH 01/20] at91: Fix bug/typo in debug_ll.h
` [PATCH 02/20] regmap: Implement syscon_node_to_regmap()
` [PATCH 03/20] pinctrl: at91: Fix a bug in at91_pinctrl_set_conf()
` [PATCH 04/20] pinctrl: at91: Fix a bug in at91_pinctrl_set_state()
` [PATCH 05/20] pinctrl: at91: Implement .get_direction hook
` [PATCH 06/20] clk: Port two helper functions from Linux
` [PATCH 07/20] clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE
` [PATCH 08/20] clk: No-op CLK_OF_DECLARE if not enabled
` [PATCH 09/20] of: base: Use scoring in DT device matching
` [PATCH 10/20] serial: atmel: Check result of clk_get()
` [PATCH 11/20] usb: ohci-at91: "
` [PATCH 12/20] usb: ohci-at91: Convert global variables to private data
` [PATCH 13/20] usb: ohci-at91: Check result of clk_enable()
` [PATCH 14/20] usb: ehci-atmel: "
` [PATCH 15/20] usb: echi-atmel: Convert global variables to private data
` [PATCH 16/20] usb: ehci-atmel: Zero ehci_data before using it
` [PATCH 17/20] usb: echi-atmel: Check result of ehci_register()
` [PATCH 18/20] spi: atmel_spi: Configure CS GPIO as output
` [PATCH 19/20] spi: atmel_spi: Use VERSION register instead of CPU type
` [PATCH 20/20] clocksource: at91: Move to 'drivers/clocksource'
[PATCH] drivers: clk: clk-imx6.c: Don't gate LDB and IPUs
2017-03-09 7:18 UTC (2+ messages)
[PATCH] ARM: imx233-olinuxino: add CONFIG_CONSOLE_ACTIVATE_ALL
2017-03-09 7:02 UTC (2+ messages)
[PATCH] scripts: imx/mxs remove mxs-usb-loader
2017-03-09 7:02 UTC (2+ messages)
[PATCH] scripts: imx imx-usb-loader: add support for imx23
2017-03-09 6:41 UTC (3+ messages)
` [PATCH v2] scripts: imx imx-usb-loader: add support for imx23 and imx28
[PATCH 07/12] efi: move x86 efi boot support to x86 arch
2017-03-09 6:37 UTC (3+ messages)
` [PATCH] fixup! "
[PATCH 1/2] x86: efi: fix efiexit support
2017-03-09 6:32 UTC (3+ messages)
` [PATCH 2/2] x86: efi: fix logo support
[PATCH 1/2] bbu: Search for cdev names aswell
2017-03-08 9:24 UTC (2+ messages)
` [PATCH 2/2] usb: fastboot: umount device before writing to it
[PATCH 00/45] AT91, at91sam9x5ek updates
2017-03-07 21:52 UTC (58+ messages)
` [PATCH 01/45] at91: Fix bug/typo in debug_ll.h
` [PATCH 02/45] at91sam9x5ek: Convert to mult-image build
` [PATCH 03/45] at91sam9x5ek: Add CONFIG_KALLSYMS to defconfig
` [PATCH 04/45] at91sam9x5ek: Add preliminary device tree support
` [PATCH 05/45] clocksource: at91: Move to 'drivers/clocksource'
` [PATCH 06/45] clocksource: at91: Add DT compatibility table
` [PATCH 07/45] serial: atmel: Check result of clk_get()
` [PATCH 08/45] serial: atmel: Add DT compatibility table
` [PATCH 09/45] regmap: Implement syscon_node_to_regmap()
` [PATCH 10/45] clk: Port two helper functions from Linux
` [PATCH 11/45] clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE
` [PATCH 12/45] clk: No-op CLK_OF_DECLARE if not enabled
` [PATCH 13/45] clk: at91: Port at91 DT clock code
` [PATCH 14/45] at91sam9x5ek: Convert to use DT clock tree
` [PATCH 15/45] at91sam9x5ek: Remove at91sam9x5ek_mem_init()
` [PATCH 16/45] at91sam9x5ek: Configure LEDs in DT
` [PATCH 17/45] pinctrl-at91: Fix a bug in at91_pinctrl_set_conf()
` [PATCH 18/45] at91: Enable PINCTRL for SOC_AT91SAM9
` [PATCH 19/45] at91sam9x5ek: Configure I2C via DT
` [PATCH 20/45] mci: Allow parsing for explicit DT node
` [PATCH 21/45] mci: atmel_mci: Add DT support
` [PATCH 22/45] at91sam9x5ek: Configure MMC in DT
` [PATCH 23/45] of: base: Use scoring in DT device matching
` [PATCH 24/45] pinctrl: at91: Fix a bug in at91_pinctrl_set_state
` [PATCH 25/45] pinctrl: at91: Implement .get_direction hook
` [PATCH 26/45] spi: atmel_spi: Add DT support
` [PATCH 27/45] spi: atmel_spi: Configure CS GPIO as output
` [PATCH 28/45] spi: atmel_spi: Use VERSION register instead of CPU type
` [PATCH 29/45] at91sam9x5ek: Configure SPI in DT
` [PATCH 30/45] w1-gpio: Add DT support
` [PATCH 31/45] at91sam9x5ek: Configure 1-wire in DT
` [PATCH 32/45] usb: ohci-at91: Check result of clk_get()
` [PATCH 33/45] usb: ohci-at91: Convert global variables to private data
` [PATCH 34/45] usb: ohci-at91: Check result of clk_enable()
` [PATCH 35/45] usb: ohci-at91: Add DT support
` [PATCH 36/45] usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled
` [PATCH 37/45] usb: ehci-atmel: Check result of clk_enable()
` [PATCH 38/45] usb: echi-atmel: Convert global variables to private data
` [PATCH 39/45] usb: ehci-atmel: Zero ehci_data before using it
` [PATCH 40/45] usb: echi-atmel: Check result of ehci_register()
` [PATCH 41/45] usb: echi-atmel: Add DT support
` [PATCH 42/45] at91sam9x5ek: Configure USB in DT
` [PATCH 43/45] net: macb: Add DT support
` [PATCH 44/45] at91sam9x5ek: Configure Ethernet in DT
` [PATCH 45/45] at91sam9x5ek: Configure NAND "
[PATCH 0/9] add generic EFI timer
2017-03-07 7:41 UTC (11+ messages)
` [PATCH 1/9] efi: add prototype and definition for creating and closing event
` [PATCH 2/9] efi: add prototype and definition for setting timer
` [PATCH 3/9] efi: move LoaderTimeInitUSec and LoaderDevicePartUUID to postcore initcall
` [PATCH 4/9] efi: move x86 clocksource init at core initcall level
` [PATCH 5/9] clocksource: allow to have multiple device from clock source
` [PATCH 6/9] clocksource: move dummy clock source to init_clock
` [PATCH 7/9] efi: move x86 clocksource to device/driver
` [PATCH 8/9] efi: clocksoure: add EFI event timer
` [PATCH 9/9] efi: add veriable to report secure boot support and status
[PATCH 1/1] video: sdl fix typo
2017-03-06 8:12 UTC (2+ messages)
[RFC PATCH 0/2] use gnuhash to speed up device/driver match
2017-03-06 8:11 UTC (4+ messages)
` [PATCH 1/2] driver: remove the const of struct platform_device_id *id_table
` [PATCH 2/2] driver: generate hash at runtime to speed up device/driver matching
[PATCH] scripts: imx imx-usb-loader: warn if device was excluded by path option
2017-03-06 7:13 UTC (2+ messages)
[PATCH] clk: imx: clk-imx6ul: Use anatop_base pointer for consistency
2017-03-06 7:12 UTC (2+ messages)
[PATCH v2 0/4] Prepare consoles, add fb flush and Solomon SSD1307 OLED controller support
2017-03-06 7:10 UTC (8+ messages)
` [PATCH v2 1/4] console: replace set_active by open/close
` [PATCH v2 2/4] console: expose consoles in devfs
` [PATCH v2 3/4] fb: introduce flush for virtual framebuffer
` [PATCH v2 4/4] video: add support for Solomon SSD1307 OLED controller family
` [PATCH] fixup! "
[PATCH 0/2] efivarfs: rework the filesystem to make it human readable
2017-03-03 15:31 UTC (3+ messages)
` [PATCH 1/2] ls: allow to list a symlink ending with '/' as a dir
` [PATCH 2/2] efivarfs: rework the filesystem to make it human readable
[PATCH 1/3] ARM: align exception vectors to 32 byte
2017-03-03 14:26 UTC (9+ messages)
` [PATCH 2/3] ARM: correctly identify ARMv6 K/Z
` [PATCH 3/3] ARM: execute DMB before trying to flush cache
[PATCH v2] clk: imx: clk-imx6ul: The i.mx6ul has no aips_tz3 clock
2017-03-03 14:12 UTC
[PATCH] clk: imx: clk-imx6ul: The i.mx6ul has no aips_tx3 clock
2017-03-03 13:39 UTC (3+ messages)
[PATCH] clk: imx: clk-imx6ul: Fixed conditional for enabling USB phy clocks
2017-03-03 10:54 UTC (2+ messages)
[PATCH v2] tftp: implement forward seeking
2017-03-03 10:52 UTC (2+ messages)
[PATCH v2] scripts: imx imx-usb-loader: add usb path support
2017-03-03 6:25 UTC (2+ messages)
[PATCH] tftp: trivial code simplification
2017-03-03 6:15 UTC (2+ messages)
[PATCH] tftp: implement forward seeking
2017-03-03 6:13 UTC (2+ messages)
[PATCH] lseek: tighten error checking and allow negative offsets for SEEK_END
2017-03-03 6:08 UTC (2+ messages)
[PATCH] scripts: imx imx-usb-loader: add usb path support
2017-03-02 14:31 UTC
i.MX28 evk compile error
2017-03-02 12:57 UTC (2+ messages)
[PATCH 1/9] ARM: rpi: move model initialisation to rpi-common
2017-03-02 8:11 UTC (10+ messages)
` [PATCH 2/9] ARM: rpi: move model detection before console init
` [PATCH 3/9] ARM: rpi: convert mailbox interface to regular driver
` [PATCH 4/9] ARM: rpi: convert watchdog/reset "
` [PATCH 5/9] clocksource: bcm2835: use clock-frequency property when available
` [PATCH 6/9] mci-bcm2835: enable devicetree probing
` [PATCH 7/9] ARM: rpi: always build relocatable image
` [PATCH 8/9] ARM: rpi: move debug UART base selection to Kconfig
` [PATCH 9/9] ARM: rpi: switch to DT probe and multi-image build
[PATCH] nand-bb: fix writing to the end of a .bb device
2017-03-02 7:42 UTC (2+ messages)
[PATCH] memcmp: fix comparison on short read
2017-03-02 7:40 UTC (2+ messages)
[PATCH] lseek: ensure errno is set on failure and return -1
2017-03-02 7:39 UTC (4+ messages)
[PATCH 0/8] add generic EFI timer
2017-03-02 7:36 UTC (6+ messages)
` [PATCH 1/8] efi: add prototype and definition for creating and closing event
` [PATCH 5/8] clocksource: allow to have multiple device from clock source
Zyxel NAS540 bricked?
2017-03-01 17:51 UTC (3+ messages)
[PATCH v2] arm: boards: phytec-som-am335x: Remove 1GB RAM type
2017-03-01 15:08 UTC (2+ messages)
GPLv3 file in barebox
2017-03-01 7:04 UTC (3+ messages)
[PATCH 0/4] mvebu: Make 2nd-stage booting possible
2017-02-28 16:06 UTC (3+ messages)
[PATCH 0/4] Prepare consoles, add fb flush and Solomon SSD1307 OLED controller support
2017-02-28 7:57 UTC (5+ messages)
` [PATCH 4/4] video: add support for Solomon SSD1307 OLED controller family
[PATCH 1/2] ARM: phycore-rk3288: Use UART2 as debug output
2017-02-28 7:53 UTC (4+ messages)
` [RFC] serial: ns16550: Set read/write functions depending on reg-io-width
[PATCH 2/4] console: expose consoles in devfs
2017-02-28 7:50 UTC (3+ messages)
` [PATCH v2] "
[PATCH 1/4] console: replace set_active by open/close
2017-02-28 7:41 UTC (3+ messages)
` [PATCH v2] "
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox