mail archive of the barebox mailing list
 help / color / mirror / Atom feed
[PATCH 1/3] serial: amba-pl011: Fix regulator_get() return check
 2018-12-13  7:10 UTC 

[PATCH v3 00/10] MIPS: migrate to multiimage support
 2018-12-13  7:10 UTC  (12+ messages)
` [PATCH v3 02/10] MIPS: add arch/mips/lib/pbl.lds.S
` [PATCH v3 08/10] MIPS: port all mach* to multiimage

[PATCH] globalvar: fix crash if CONFIG_NVVAR is not set
 2018-12-13  7:06 UTC  (2+ messages)

[PATCH 1/4] net/e1000: Map custom error codes to more appropriate errno values
 2018-12-13  7:03 UTC  (4+ messages)
` [PATCH 2/4] net/e1000: Do not discard EEPROM error code in e1000_setup_link()
` [PATCH 3/4] net/e1000: Use dev_err to report error
` [PATCH 4/4] net/e1000: Only read EEPROM_INIT_CONTROL2_REG if it is needed

[PATCH 1/3] Documentation: i.MX: improve wording, add markup and missing articles
 2018-12-13  6:57 UTC  (4+ messages)
` [PATCH 2/3] Documentation: state: fix closing brace without opening brace
` [PATCH 3/3] Documentation: i.MX: Kindle 4/5: fix sphinx warnings

[PATCH 1/2] mfd: rave-sp: Add parameters to query IP address/netmask
 2018-12-13  6:50 UTC  (3+ messages)
` [PATCH 2/2] backlight: rave-sp: init all brightness to default level

[PATCH] clk: imx5: add di_pred
 2018-12-13  6:47 UTC  (2+ messages)

[PATCH] ARM: rdu2: add command to reset network switch
 2018-12-13  6:47 UTC  (2+ messages)

[PATCH] ARM: fix setup_c when runtime offset is != 0
 2018-12-13  6:40 UTC 

[PATCH] scripts/mkcompile_h: Remove trailing spaces from compiler version
 2018-12-13  6:34 UTC 

[PATCH] imd: model and compatible missing in metadata
 2018-12-13  6:33 UTC 

[PATCH 0/6] Raspberry Pi miniuart support
 2018-12-12 14:58 UTC  (9+ messages)
` [PATCH 1/6] mach-bcm2835/core: add clkdev for uart1
` [PATCH 2/6] serial_ns16550: handle default reg-io-width
` [PATCH 3/6] serial_ns16550: add raspberry pi compatible and init
` [PATCH 4/6] ARM: rpi: add NS16550 support
` [PATCH 5/6] bcm2837-rpi-3: choose miniuart as stdout
` [PATCH 6/6] doc: bcm283x: remove miniuart overlay instruction

CCMX51 is not boot anymore
 2018-12-11  8:17 UTC  (2+ messages)

[PATCH] lib/xymodem: Decrease read block timeout
 2018-12-11  2:14 UTC  (2+ messages)

[PATCH] phycard-imx27: add support for 64MB RAM variants
 2018-12-10  9:19 UTC  (2+ messages)

[PATCH v2 0/4] Xilinx Zynq Ultrascale+ MPSoC support
 2018-12-10  9:13 UTC  (7+ messages)
` [PATCH v3 "
  ` [PATCH v3 1/4] ARM: lib64: .gitignore barebox.lds
  ` [PATCH v3 2/4] ARM: aarch64: compile with general-regs-only
  ` [PATCH v3 3/4] ARM: aarch64: add ENTRY_PROC macro for arm64
  ` [PATCH v3 4/4] ARM: zynqmp: add support for Xilinx ZCU104 board

[PATCH] Documentation: i.MX: Document how to use GPT
 2018-12-10  9:05 UTC  (2+ messages)

[PATCH 1/6] mci: core: Use alias as a devname by default
 2018-12-10  9:03 UTC  (7+ messages)
` [PATCH 2/6] mci: tegra-sdmmc: Drop explicit devname setup code
` [PATCH 3/6] mci: dw_mmc: "
` [PATCH 4/6] mci: omap_hsmmc: "
` [PATCH 5/6] mci: imx-esdhc: "
` [PATCH 6/6] mci: mxs: "

[PATCH] lib/parameter: Fix typecases to match corresponding PARAM_TYPE_*
 2018-12-10  8:57 UTC  (2+ messages)

[PATCH] nvmem: ocotp: Make use of postcore_platform_driver macro
 2018-12-10  8:56 UTC  (2+ messages)

[PATCH 1/3] led: core: Don't call get_time_us() twice
 2018-12-10  8:54 UTC  (4+ messages)
` [PATCH 2/3] led: core: Initialize blink_next_event with 0
` [PATCH 3/3] led: core: Make use of ARRAY_AND_SIZE

[PATCH] commands: boot: Remove useless code
 2018-12-10  8:54 UTC  (2+ messages)

[PATCH] mfd: rave-sp: Make use of wait_on_timeout()
 2018-12-10  8:53 UTC  (2+ messages)

[PATCH] net: lib: Make use of ETH_ALEN
 2018-12-10  8:53 UTC  (2+ messages)

[PATCH 1/4] driver: left shift 1U instead of 1 in bitmask for consistency
 2018-12-10  8:39 UTC  (7+ messages)
` [PATCH 2/4] of: partition: use NULL instead of never-read argument
` [PATCH 3/4] of: partitions: make macro name more generic
` [PATCH 4/4] of: partition: add no-fixup device tree property

[PATCH 00/15] Makefile: sync with linux v4.13 and add thin archives support
 2018-12-09 23:07 UTC  (11+ messages)
` [PATCH 02/15] Makefile: Correctly deal with make options which contain an "s"
` [PATCH 04/15] scripts/Kbuild.include: replace KBUILD_CPPFLAGS with CPPFLAGS
` [PATCH 07/15] Makefile: link of barebox moved to script

GPIO support missing for SoCFPGA?
 2018-12-07 15:35 UTC  (3+ messages)

[PATCH 0/7] Fastboot improvements
 2018-12-07 10:34 UTC  (8+ messages)
` [PATCH 1/7] usb: gadget: fastboot: pass message type as enum
` [PATCH 2/7] usb: gadget: fastboot: drop unnecessary global variable
` [PATCH 3/7] usb: gadget: fastboot: remove unnecessary context setting
` [PATCH 4/7] usb: gadget: fastboot: tell host that we are going to shutdown
` [PATCH 5/7] usb: gadget: fastboot: be more informative on booting
` [PATCH 6/7] usb: gadget: fastboot: simplify reboot
` [PATCH 7/7] usb: gadget: fastboot: print fastboot messages also to the logs

[PATCH 1/4] ARM: imx: select OFDEVICE for VF610
 2018-12-07  9:01 UTC  (7+ messages)
` [PATCH 2/4] of: remove non-existent of_match_ptr
` [PATCH 3/4] ARM: at91: add architecture dependecy to KSZ9477_EVB board
` [PATCH 4/4] scripts: imx-image: fix build with OpenSSL < 1.1.0

v2018.12.0
 2018-12-07  7:34 UTC 

[PATCH v1] drivers: net: usb: convert drivers to spdx
 2018-12-07  6:57 UTC  (2+ messages)

[PATCH v2] drivers: net: phy: convert drivers to spdx
 2018-12-07  6:56 UTC  (2+ messages)

[PATCH 1/3] ARM: dts: phyCORE-i.MX 6UL: Enable USB host port
 2018-12-06  8:10 UTC  (4+ messages)
` [PATCH 2/3] ARM: dts: phyCORE-i.MX 6UL/ULL: Enable USB OTG on port 1
` [PATCH 3/3] ARM: phytec-som-imx6: Add full featured phyCORE-i.MX 6ULL

issues communicating with SPI on Raspberry Pi 3
 2018-12-06  8:03 UTC  (2+ messages)

[PATCH v2 0/4] checkpatch.pl: add ability to ignore various messages
 2018-12-06  7:57 UTC  (7+ messages)
` [PATCH v2 1/4] "
` [PATCH v2 2/4] checkpatch.pl: check for common memset parameter issues against statements
` [PATCH v2 3/4] checkpatch.pl: use SPDX tag
` [PATCH v2 4/4] checkpatch.pl: check for #if 0/#if 1

[PATCH] documentation: document eMMC boot{0,1}-partitions binding
 2018-12-06  7:41 UTC  (2+ messages)
` [PATCH] documentation: document eMMC boot{0, 1}-partitions binding

[PATCH v2] drivers: net: convert drivers to spdx
 2018-12-06  7:41 UTC  (3+ messages)

[PATCH v1] drivers: net: phy: convert drivers to spdx
 2018-12-05 18:57 UTC  (3+ messages)

[PATCH 0/4] checkpatch.pl: port misc linux commits
 2018-12-05 13:11 UTC  (5+ messages)
` [PATCH 1/4] checkpatch.pl: add ability to ignore various messages
` [PATCH 2/4] checkpatch.pl: check for common memset parameter issues against statements
` [PATCH 3/4] checkpatch.pl: use SPDX tag
` [PATCH 4/4] checkpatch.pl: check for #if 0/#if 1

[PATCH] phytec-som-imx6: ksz8081_phy_fixup: Don't override B-CAST_OFF strap-in
 2018-12-05  7:55 UTC  (2+ messages)

[PATCH] common/parser.c: s/%d/%zu/ when printing size_t
 2018-12-05  7:53 UTC  (2+ messages)

[PATCH] lib: bootstrap: fix instance of possibly mismatched pointer sizes
 2018-12-05  7:52 UTC  (2+ messages)

[PATCH] nvmem: ocotp: Add support for second mac address fuses on imx6ul
 2018-12-05  7:51 UTC  (2+ messages)

[PATCH 1/2] mtd: spi-nor: Add support for sst25wf020a
 2018-12-05  7:50 UTC  (3+ messages)
` [PATCH 2/2] mtd: spi-nor: Add support for sst25wf040b

[PATCH] arm: common: document safe usage of arm_setup_stack
 2018-12-04  9:15 UTC 

[PATCH v1] drivers: net: convert drivers to spdx
 2018-12-04  8:56 UTC  (4+ messages)

[PATCH v2 1/2] drivers: caam: add RNG software self-test
 2018-12-04  8:20 UTC  (8+ messages)
` [PATCH v2 2/2] i.MX: HABv4: always print HAB status at boot time
  ` [PATCH] fixup! drivers: caam: add RNG software self-test

[PATCH v1] defaultenv-2: add bnet script to second stage barebox over net
 2018-12-04  7:59 UTC  (2+ messages)

[PATCH] net: macb: dma_sync_* receive buffers
 2018-12-04  7:58 UTC  (3+ messages)

[PATCH] serdev: select POLLER
 2018-12-04  7:33 UTC  (3+ messages)

ubifs
 2018-12-03 13:35 UTC  (5+ messages)

[PATCH 1/2] drivers: caam: add RNG software self-test
 2018-12-03 10:17 UTC  (8+ messages)
` [PATCH 2/2] i.MX: HABv4: always print HAB status at boot time

[PATCH 1/6] ARM: mmu64: include dma.h
 2018-12-03  8:22 UTC  (7+ messages)
` [PATCH 2/6] ARM: nxp-imx8mq-evk: add missing prototype for nxp_imx8mq_evk_ddr_cfg_phy
` [PATCH 3/6] ARM: ptrace: add mssing show_regs prototype in aarch64 path
` [PATCH 4/6] ARM: interrupts64: add missing prototypes
` [PATCH 5/6] ARM: add prototype for mmu_early_disable
` [PATCH 6/6] ARM64: backtrace: fix missing prototypes

[PATCH] kconfig: include common Kconfig files from top-level Kconfig
 2018-12-03  7:43 UTC  (2+ messages)

[PATCH 1/3] memory_display: Print whole line at once
 2018-12-03  7:37 UTC  (3+ messages)
` [PATCH 2/3] memory_display: move prototype to include/printk.h
` [PATCH 3/3] Add pr_memory_display

[PATCH 0/3] ARM: images: Use piggydata
 2018-12-01  0:34 UTC  (5+ messages)
` [PATCH 2/3] ARM: i.MX: Add max_load_size option to boards that will need it

[PATCH] fixup! ARM: i.MX: Add max_load_size option to boards that will need it
 2018-11-30 21:22 UTC  (2+ messages)

imx6 usb update
 2018-11-30 21:16 UTC  (3+ messages)

[PATCH] clocksource: Add dw_apb_timer driver
 2018-11-30 19:20 UTC  (2+ messages)

[PATCH 1/3] net: dns: Use pr_debug
 2018-11-30  9:25 UTC  (3+ messages)
` [PATCH 3/3] net: dns: return error codes

[PATCH 1/4] net: designware: socfpga: return error value
 2018-11-30  9:15 UTC  (3+ messages)
` [PATCH 4/4] net: designware: return error value in mii_write

page:  |  | latest

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox