mail archive of the barebox mailing list
 help / color / mirror / Atom feed
[PATCH v2] firmware-zynqmp: port from linux
 2019-02-21 12:13 UTC  (2+ messages)

i.MX6ul USB serial downloader and Barebox
 2019-02-21 12:01 UTC  (4+ messages)
  ` AW: "

[PATCH 1/2] imd: create new helper macro to add data from oftree to image meta data
 2019-02-21 10:25 UTC  (2+ messages)
` [PATCH 2/2] ARM: phytec-som-imx6: make use of new imd oftree helper

[PATCH 0/3] VideoCore FDT interop for Raspberry Pi
 2019-02-21  9:28 UTC  (4+ messages)
` [PATCH 1/3] ARM: start: save end of memory passed to start
` [PATCH 2/3] ARM: rpi: save fdt that was passed from VideoCore
` [PATCH 3/3] commands: add of_bootargs command

[PATCH] genenv: create a gcc-like .d file for depenencies
 2019-02-21  8:34 UTC  (5+ messages)

[PATCH 00/25] i.MX8MQ USB support
 2019-02-20 18:54 UTC  (28+ messages)
` [PATCH 01/25] usb: xhci-hcd: Tabify the file
` [PATCH 02/25] usb: xhci-hcd: Do not zero out DMA coherent memory
` [PATCH 03/25] usb: xhci-hcd: Cast ~XHCI_IRQS to u32
` [PATCH 04/25] usb: xhci-hcd: Make sure to initialize xhci->rings_list
` [PATCH 05/25] usb: xhci-hcd: Drop pointless bitwise or
` [PATCH 06/25] usb: xhci-hcd: Add support for 64-byte context size
` [PATCH 07/25] usb: xhci-hcd: Don't try to DMA sync if buffer is NULL
` [PATCH 08/25] usb: xhci-hcd: Always wait for "Response Data" completion
` [PATCH 09/25] usb: xhci-hcd: Convert xhci_submit_normal() to use dma_map_single()
` [PATCH 10/25] usb: xhci-hcd: Convert xhci_submit_control() "
` [PATCH 11/25] usb: xhci-hcd: Simplify TRB initialization code
` [PATCH 12/25] usb: xhci-hcd: Drop 'dma' field from struct xhci_hcd
` [PATCH 13/25] usb: xhci-hcd: Check usb_pipein(pipe) only once in xhci_submit_normal()
` [PATCH 14/25] usb: xhci-hcd: Initialize TRT flag for xHCI >= 1.0
` [PATCH 15/25] usb: xhci-hcd: Simplify route string building loop
` [PATCH 16/25] usb: xhci-hcd: Make use of lo_hi_readq/writeq()
` [PATCH 17/25] phy: core: Assume EPROBE_DEFER in of_phy_provider_lookup()
` [PATCH 18/25] phy: Port i.MX8MQ USB PHY driver from Linux
` [PATCH 19/25] clk: Drop separate definitions of clk_put()
` [PATCH 20/25] include/usb: Import USB_SPEED_SUPER_PLUS from Linux
` [PATCH 21/25] clk: Import a subset of clk_bulk API "
` [PATCH 22/25] usb: Import DWC3 USB controller driver "
` [PATCH 23/25] lib: Port basic Linux kernel NLS functions
` [PATCH 24/25] usb: Port Microchip USB251x USB hub driver from Linux
` [PATCH 25/25] usb: usb251xb: add usb data lane port swap feature

[PATCH v2 00/16] ARM: at91: microchip-kz9477-evb: support first stage boot
 2019-02-20  9:27 UTC  (22+ messages)
` [PATCH v2 01/16] LICENSES: add BSD-1-Clause license
` [PATCH v2 02/16] ARM: at91: import at91bootstrap's at91_ddrsdrc.h
` [PATCH v2 03/16] ARM: at91: migrate at91sam9_ddrsdr.h to use "
` [PATCH v2 04/16] ARM: at91: replace at91sam9_ddrsdr.h with "
` [PATCH v2 05/16] ARM: at91: watchdog: implement at91_wdt_disable
` [PATCH v2 06/16] ARM: at91: import lowlevel clock initialization from at91bootstrap
` [PATCH v2 07/16] ARM: at91: import early_udelay "
` [PATCH v2 08/16] ARM: at91: import low level DDRAMC initialization code "
` [PATCH v2 09/16] ARM: at91: import lowlevel dbgu UART init "
` [PATCH v2 10/16] images: at91: differentiate between first and second stage images
` [PATCH v2 11/16] ARM: at91: sama5: specify 0x10000 as first stage max size
` [PATCH v2 12/16] ARM: at91: microchip-ksz9477-evb: use compressed DTB
` [PATCH v2 13/16] ARM: dts: microchip-ksz9477-evb: add dummy first stage device tree
` [PATCH v2 14/16] ARM: at91: microchip-ksz9477-evb: implement first stage
` [PATCH v2 15/16] ARM: at91: microchip-ksz9477: provide board code fallback
` [PATCH v2 16/16] doc: microchip-ksz9477-evb: add documentation

[PATCH] fixup! scripts/checkpatch.pl: rebase on top of upstream v5.0-rc6
 2019-02-20  8:10 UTC  (2+ messages)

[PATCH 0/2] scripts/dtc: Update to upstream version v1.4.7
 2019-02-20  7:58 UTC  (4+ messages)
` [PATCH 1/2] scripts/dtc: fix update-dtc-source.sh for barebox use
` [PATCH 2/2] scripts/dtc: Update to upstream version v1.4.7

[PATCH 0/4] ARM: at91: misc fixes and cleanup
 2019-02-20  7:55 UTC  (10+ messages)
` [PATCH 1/4] ARM: at91: replace __raw_{readl, writel} of peripherals with readl, writel
` [PATCH 2/4] ARM: at91: debug_ll: make UART base address configurable
` [PATCH 3/4] ARM: at91: fix at91sama5_get_ddram_size for sama5d4
` [PATCH 4/4] ARM: at91: remove duplicate get_ddram_size code

[PATCH v2 0/2] LICENSES: adopt Linux-like LICENSES directory structure
 2019-02-20  7:42 UTC  (5+ messages)
` [PATCH v2 1/2] "
` [PATCH v2 2/2] scripts/checkpatch.pl: rebase on top of upstream v5.0-rc6

[PATCH] LICENSES: adopt Linux-like LICENSES directory structure
 2019-02-19 14:19 UTC  (6+ messages)

[PATCH v1 1/4] MIPS: relocation: pass ram size to pbl_main_entry
 2019-02-19 13:27 UTC  (7+ messages)
` [PATCH v1 2/4] MIPS: relocation: add relocation support
` [PATCH v1 3/4] MIPS: relocation: do not use configurable memory layout
` [PATCH v1 4/4] MIPS: remove request_sdram_region "fdt"

[PATCH] ARM: dts: imx6*phytec*: switch to new partitioning scheme
 2019-02-19 13:03 UTC  (5+ messages)
  ` [PATCH v2] "
      ` [PATCH v3] "

[PATCH 1/2] images: pbl: verify CONFIG_BAREBOX_MAX_IMAGE_SIZE is not exceeded
 2019-02-19 12:15 UTC  (3+ messages)
` [PATCH 2/2] images: allow overriding BAREBOX_MAX_IMAGE_SIZE from arch Kconfig

[PATCH v3 0/9] at91: Support PMC clock bindings
 2019-02-19 11:14 UTC  (15+ messages)
` [PATCH v3 1/9] arm: at91: fix at91_configure_usart6 warning
` [PATCH v3 2/9] clocksource: Do not mix depends and select for ATMEL_PIT
` [PATCH v3 3/9] arm: at91: add SOC_SAMA5{D3,D4}
` [PATCH v3 4/9] clk: at91: add at91sam9260
` [PATCH v3 5/9] clk: at91: add at91sam9rl
` [PATCH v3 6/9] clk: at91: add at91sam9x5
` [PATCH v3 7/9] clk: at91: add sama5d2
` [PATCH v3 8/9] clk: at91: add sama5d4
` [PATCH v3 9/9] clk: at91: update to PMC bindings
    ` [PATCH] fixup! "
      ` [PATCH] regmap: Implement syscon_regmap_lookup_by_compatible()

[PATCH v2 0/9] at91: Support PMC clock bindings
 2019-02-19 10:53 UTC  (19+ messages)
` [PATCH v2 1/9] clocksource: Do not mix depends and select for ATMEL_PIT
` [PATCH v2 2/9] arm: at91: fix at91_configure_usart6 warning
` [PATCH v2 3/9] arm: at91: add SOC_SAMA5{D3,D4}
` [PATCH v2 4/9] clk: at91: add at91sam9260
` [PATCH v2 5/9] clk: at91: add at91sam9rl
` [PATCH v2 6/9] clk: at91: add at91sam9x5
` [PATCH v2 7/9] clk: at91: add sama5d2
` [PATCH v2 8/9] clk: at91: add sama5d4
` [PATCH v2 9/9] clk: at91: update to new bindings

[PATCH v2 0/8] Fixing MMC access on Raspberry Pi CM3
 2019-02-19  9:08 UTC  (10+ messages)
` [PATCH v2 1/8] ARM: rpi: switch emmc from sdhost to sdhci
` [PATCH v2 2/8] Kconfig: add pin controllers submenu
` [PATCH v2 3/8] pinctrl: bcm2835: move existing code from gpio
` [PATCH v2 4/8] pinctrl: bcm2835: register the pin controller
` [PATCH v2 5/8] mci: bcm2835: use device_initcall(), not coredev
` [PATCH v2 6/8] mci: bcm2835: parse other device tree properties
` [PATCH v2 7/8] ARM: rpi: Add device tree for Compute Module 3
` [PATCH v2 8/8] ARM: rpi: add CONFIG_PINCTRL to rpi_defconfig

[PATCH] firmware-zynqmp: port from linux
 2019-02-19  9:03 UTC  (4+ messages)

[PATCH 0/7] Fixing MMC access on Raspberry Pi CM3
 2019-02-18  9:54 UTC  (7+ messages)
` [PATCH 5/7] mci: move after pinctrl in link order
` [PATCH 7/7] ARM: rpi: Add device tree for Compute Module 3

[PATCH v3] Documentation: add watchdog documentation
 2019-02-18  9:23 UTC  (5+ messages)

[PATCH] commands: nandtest: provide readonly test
 2019-02-18  9:01 UTC  (2+ messages)

[PATCH] ARM: i.MX8MQ: Check CPU type in imx8mq_init_syscnt_frequency()
 2019-02-18  8:57 UTC  (2+ messages)

[PATCH v2] ARM: i.MX8MQ: Add code to report HDMI/eDP firmware version
 2019-02-18  8:56 UTC  (2+ messages)

[PATCH] watchdog: fix WATCHDOG_POLLER menuconfig
 2019-02-18  8:55 UTC  (2+ messages)

[PATCH v2 0/4] add (U)EFI watchdog
 2019-02-18  8:54 UTC  (6+ messages)
` [PATCH v2 1/4] efi: add prototype and definition for set_watchdog_timer
` [PATCH v2 2/4] watchdog: add (U)EFI driver
` [PATCH v2 3/4] efi_defconfig: enable watchdog support
` [PATCH v2 4/4] Documentation: efi: provide (U)EFI watchdog documentation

[PATCH v1 1/3] ARM: rpi: make locally used functions static
 2019-02-18  8:52 UTC  (4+ messages)
` [PATCH v1 3/3] amba: pl011: "

[PATCH] watchdog: bcm2835: set timeout_max
 2019-02-18  8:48 UTC  (2+ messages)

[PATCH 0/8] Bootchooser Documentation Update
 2019-02-18  8:30 UTC  (10+ messages)
` [PATCH 1/8] doc: bootchooser: fix typos etc
` [PATCH 2/8] doc: bootchooser: explicitly note configuration vs. storage backend
` [PATCH 3/8] doc: bootchooser: be more explicit what bootchooser.state_prefix is for
` [PATCH 4/8] doc: bootchooser: be more explicit about attempts reset on successful boot
` [PATCH 5/8] doc: bootchooser: note how to actually start the bootchooser
` [PATCH 6/8] doc: bootchooser: be more explicit about when the bootchooser terminates
` [PATCH 7/8] doc: bootchooser: add details about bootchooser.reset_attempts handling
` [PATCH 8/8] doc: bootchooser: add retry handling to algorithm description

[PATCH 0/8] NVME support
 2019-02-18  8:24 UTC  (2+ messages)

[PATCH] efi: cleanups
 2019-02-18  8:13 UTC  (3+ messages)

[PATCH v2] Documentation: add watchdog documentation
 2019-02-18  7:07 UTC  (2+ messages)

[PATCH] dts: Revert at91 switch to new PMC clock bindings
 2019-02-17 16:25 UTC  (3+ messages)

[PATCH] Documentation: add watchdog documentation
 2019-02-15 16:16 UTC  (2+ messages)

[PATCH 1/6] include: add SPDX GPL-2.0-only license tags where applicable
 2019-02-15 11:18 UTC  (7+ messages)

[PATCH] kbuild: Add missing semicolon
 2019-02-15  1:53 UTC  (2+ messages)

Usage of mender - updating back to u-boot
 2019-02-15  1:09 UTC  (2+ messages)

[PATCH] ARM: phyCORE-i.MX8M SOM support
 2019-02-14 18:20 UTC  (4+ messages)

page:  |  | latest

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox