[PATCH 1/6] ARM: add Zii common directory and move switch reset command
2019-03-13 10:56 UTC (5+ messages)
` [PATCH 2/6] ARM: zii-common: add support for switch reset on RDU1
` [PATCH 3/6] ARM: zii-common: introduce RDU part-number based fixup abstraction
` [PATCH 4/6] ARM: zii-common: fetch network config from SP
` [PATCH 6/6] ARM: rdu2: patch DSA config
[PATCH 00/15] barebox Layerscape support
2019-03-13 9:42 UTC (16+ messages)
` [PATCH 01/15] mci: imx-esdhc: Actually enable cache snooping
` [PATCH 02/15] Add Freescale QUICC Engine firmware support
` [PATCH 03/15] net: Add Freescale FMan ethernet support
` [PATCH 04/15] ARM: Add arm64 pbl udelay
` [PATCH 05/15] esdhc-xload: Add support for Layerscape
` [PATCH 06/15] watchdog: imx: Add register accessor functions
` [PATCH 07/15] watchdog: imx: Add big endian register access support
` [PATCH 08/15] scripts: Add Layerscape image tool
` [PATCH 09/15] i2c: i.MX: Add layerscape support
` [PATCH 10/15] ddr: fsl: Add Freescale ddr driver
` [PATCH 11/15] ARM: Add basic Layerscape support
` [PATCH 12/15] clk: Add Layerscape clk support
` [PATCH 13/15] ARM: Layerscape: Add LS1046a RDB board support
` [PATCH 14/15] ARM: Layerscape: Add TQ TQMLS1046a "
` [PATCH 15/15] ARM: Add layerscape_defconfig
[PATCH 1/6] include: add SPDX GPL-2.0-only license tags where applicable
2019-03-13 9:42 UTC (5+ messages)
[RFC][PATCH] pbl multiimage: Allow to check image sizes
2019-03-13 9:32 UTC
[PATCH 0/3] Earlycon command line option support
2019-03-13 8:45 UTC (6+ messages)
` [PATCH 1/3] console: Add plumbing to expose earlycon/bootconsole parameter
` [PATCH 2/3] serial: i.MX: Add code to export "earlycon" setting
` [PATCH 3/3] serial: lpuart: "
[PATCH] libfile: Make use of write_full() in copy_file()
2019-03-13 8:42 UTC (2+ messages)
[PATCH 1/2] commands: memcpy: Make use of write_full()
2019-03-13 8:41 UTC (3+ messages)
` [PATCH 2/2] commands: memcpy: Make use of min_t()
[PATCH 1/2] ARM: zii-vf610-dev: Add ZII SPB4 board
2019-03-13 8:40 UTC (3+ messages)
` [PATCH 2/2] ARM: zii-vf610-dev: Switch SCU4 AIB board to use upstream DTS
[PATCH 1/3] fs: ramfs: Drop unused 'handle' filed from struct ramfs_inode
2019-03-13 8:37 UTC (4+ messages)
` [PATCH 2/3] fs: ramfs: Drop unused 'chunks' conter
` [PATCH 3/3] fs: ramfs: Drop unnecessary check in ramfs_mknod()
[PATCH 00/14] Add initial STMicroelectronics MP1 support
2019-03-13 8:35 UTC (17+ messages)
` [PATCH 01/14] clk: clk-composite: return parent_rate if no rate clk
` [PATCH 02/14] clk: parent_names should be const
` [PATCH 03/14] clk: export clk_gate_is_enabled()
` [PATCH 04/14] clk: Make CLK_IGNORE_UNUSED generic
` [PATCH 05/14] clk: Support CLK_IS_CRITICAL flag
` [PATCH 06/14] clk: divider: pass divider flags
` [PATCH 07/14] clk: divider: Support CLK_DIVIDER_READ_ONLY flag
` [PATCH 08/14] clk: mux: Support mux specific flags
` [PATCH 09/14] clk: mux: Support CLK_MUX_READ_ONLY flag
` [PATCH 10/14] clk: mux: Support CLK_SET_RATE_NO_REPARENT flag
` [PATCH 11/14] ARM: stm32mp1: Add clk driver
` [PATCH 12/14] ARM: stm32mp1: Add serial driver
` [PATCH 13/14] clocksource: Enable architected timer support for CPU_V7
` [PATCH 14/14] ARM: Add initial STM32MP1 support
[PATCH] commands: bootaux: New command bootaux for iMX
2019-03-13 8:32 UTC (5+ messages)
[PATCH v2] usb: dwc3: Toggle GCTL.CORESOFTRESET as a first step
2019-03-13 7:25 UTC
[PATCH 1/2] ARM: i.MX7: Make sure CNTFRQ is initialized early enough
2019-03-13 3:31 UTC (2+ messages)
` [PATCH 2/2] ARM: i.MX8MQ: Don't use cpu_is_mx8mq() at core_initcall level
[PATCH 0/6] ZynqMP clock driver
2019-03-12 10:20 UTC (7+ messages)
` [PATCH 1/6] of: populate "/firmware" while populating device tree
` [PATCH 2/6] ARM: zynqmp: populate zynqmp_firmware dt node
` [PATCH 3/6] ARM: zynqmp: move PAYLOAD_ARG_CNT to firmware header
` [PATCH 4/6] clk: add ZynqMP clock driver
` [PATCH 5/6] ARM: zynqmp: add firmware DT node
` [PATCH 6/6] ARM: zynqmp: switch to firmware clock driver
[PATCH] usb: dwc3: Toggle GCTL.CORESOFTRESET as a first step
2019-03-12 1:48 UTC (3+ messages)
[PATCH 1/3] net: phy: Add PHY_ID_MATCH_* macros
2019-03-11 13:21 UTC (3+ messages)
` [PATCH 2/3] net: phy: Add register access helper functions for phys
` [PATCH 3/3] realtek phy driver
[PATCH 0/5] ARM: rpi: refactor debug_ll
2019-03-11 7:25 UTC (12+ messages)
` [PATCH 1/5] ARM: rpi: Move UART base address definitions to header file
` [PATCH 2/5] debug_ll: Move pl011 header file to architecture independent place
` [PATCH 3/5] debug_ll: Add ns16550 early debugging functions
` [PATCH 4/5] ARM: rpi: move debug UART Kconfig settings
` [PATCH 5/5] ARM: rpi: Add mini UART debug_ll support
` [HELP] Kernel + initrd in FIT
[PATCH v2 0/2] ARM: rpi: refactor debug UART Kconfig settings
2019-03-11 7:14 UTC (4+ messages)
` [PATCH v2 1/2] ARM: rpi: move "
` [PATCH v2 2/2] common: Kconfig: improve help text for DEBUG_LL
[PATCH 00/26] USB storage improvements
2019-03-11 7:11 UTC (28+ messages)
` [PATCH 01/26] usb: storage: Simplify memory allocation in usb_stor_probe()
` [PATCH 02/26] usb: storage: Replace custom debug tracing with dev_dbg
` [PATCH 03/26] usb: storage: Don't use "unsigned long" for 32-bit values
` [PATCH 04/26] usb: storage: Make usb_stor_read_capacity() a standalone function
` [PATCH 05/26] usb: storage: Make usb_stor_inquiry() "
` [PATCH 06/26] usb: storage: Make usb_stor_test_unit_ready() "
` [PATCH 07/26] usb: storage: Make usb_stor_read_10() "
` [PATCH 08/26] usb: storage: Make usb_stor_write_10() "
` [PATCH 09/26] usb: storage: Drop extra call to transport in usb_stor_write_10()
` [PATCH 10/26] usb: storage: Share code for READ(10) and WRITE(10)
` [PATCH 11/26] usb: storage: Make usb_stor_request_sense() a standalone function
` [PATCH 12/26] usb: storage: Remove unused variables
` [PATCH 13/26] usb: storage: Drop struct SCSI_cmd_block
` [PATCH 14/26] usb: hub: Do not include <scsi.h>
` [PATCH 15/26] ata: ahci: "
` [PATCH 16/26] usb: storage: Drop unused fields in struct us_data
` [PATCH 17/26] usb: storage: Drop unused us_blkdev_list
` [PATCH 18/26] usb: storage: Introduce usb_stor_transport()
` [PATCH 19/26] usb: storage: Use put_unaligned_be* helpers
` [PATCH 20/26] usb: Drop usb_disable_asynch()
` [PATCH 21/26] usb: storage: Drop unnecessary check in usb_stor_blk_io()
` [PATCH 22/26] usb: storage: Drop needless macro
` [PATCH 23/26] usb: storage: Use simple boolean to speficy read vs. write operation
` [PATCH 24/26] usb: storage: Simplify I/O loop in usb_stor_blk_io()
` [PATCH 25/26] usb: storage: Drop unnecessary assignment
` [PATCH 26/26] usb: storage: Inline usb_limit_blk_cnt()
[PATCH 00/17] lseek related fixes
2019-03-11 6:56 UTC (19+ messages)
` [PATCH 01/17] libfile: Make failure path of open_and_lseek() consistent
` [PATCH 02/17] common: Always return enum filetype in file_name_detect_type_offset()
` [PATCH 03/17] MIPS: ath79: Use errno to get error code from open_and_lseek()
` [PATCH 04/17] ARM: i.MX: bbu: Fix variable type in imx_bbu_external_nand_update()
` [PATCH 05/17] ARM: i.MX: bbu: Fix lseek error check "
` [PATCH 06/17] ARM: i.MX: bbu: Fix lseek error check in imx_bbu_internal_v2_write_nand_dbbt()
` [PATCH 07/17] ARM: i.MX: bbu: Fix variable type "
` [PATCH 08/17] bpkfs: Fix lseek error check in bpkfs_probe()
` [PATCH 09/17] uimage: Fix lseek error check in uimage_verify()
` [PATCH 10/17] uimage: Fix lseek error check in uimage_load()
` [PATCH 11/17] uimage: Fix lseek error check in uimage_load_to_buf()
` [PATCH 12/17] state: Fix lseek error check in state_backend_bucket_direct_read()
` [PATCH 13/17] state: Fix lseek error check in state_backend_bucket_direct_write()
` [PATCH 14/17] state: Fix lseek error check in state_mtd_peb_read()
` [PATCH 15/17] state: Fix lseek error check in state_mtd_peb_write()
` [PATCH 16/17] commands: loadxy: Make use of open_and_lseek()
` [PATCH 17/17] commands: loadb: "
[PATCH v2 0/4] MIPS: add relocation support
2019-03-08 10:58 UTC (5+ messages)
` [PATCH v2 1/4] MIPS: relocation: pass ram size to pbl_main_entry
` [PATCH v2 2/4] MIPS: relocation: add relocation support
` [PATCH v2 3/4] MIPS: relocation: do not use configurable memory layout
` [PATCH v2 4/4] MIPS: remove request_sdram_region "fdt"
[PATCH 1/2] images: pbl: verify CONFIG_BAREBOX_MAX_IMAGE_SIZE is not exceeded
2019-03-07 10:45 UTC (4+ messages)
v2019.03.0
2019-03-07 7:55 UTC
[PATCH v2] ARM: dts: imx6*phytec*: switch to new partitioning scheme
2019-03-07 7:25 UTC (4+ messages)
` [PATCH v3] "
[PATCH] ARM: i.MX6UL: liteSOM: depend on DDR controller settings
2019-03-07 7:24 UTC (4+ messages)
[PATCH] fix zbarebox linking with new ld
2019-03-07 7:21 UTC (2+ messages)
[PATCH] PCI: dwc: tune down link up messages
2019-03-07 7:19 UTC (2+ messages)
[PATCH] ARM: rpi: refactor debug UART Kconfig settings
2019-03-06 9:45 UTC (4+ messages)
[PATCH v1 1/4] MIPS: relocation: pass ram size to pbl_main_entry
2019-03-05 8:07 UTC (4+ messages)
` [PATCH v1 2/4] MIPS: relocation: add relocation support
Tutorial on how to boot Raspbian from Barebox
2019-03-05 7:29 UTC
[PATCH 0/6] SPD EEPROM improvements
2019-03-04 13:22 UTC (12+ messages)
` [PATCH 1/6] crc: import crc_itu_t() from kernel
` [PATCH 2/6] crc: Add PBL variant for crc_itu_t()
` [PATCH 3/6] ddr_spd: Update from U-Boot
` [PATCH 4/6] ddr_spd: Add function to read eeprom
` [PATCH 5/6] ddr_spd: provide common SPD type
` [PATCH 6/6] ddr_spd: Enable in PBL
[PATCH 0/5] ESDHC xload: Prepare for Layerscape support
2019-03-04 13:18 UTC (6+ messages)
` [PATCH 1/5] esdhc-xload: Move to drivers/mci
` [PATCH 2/5] esdhc-xload: move some register defines to header file
` [PATCH 3/5] esdhc-xload: Use static inline io wrappers
` [PATCH 4/5] esdhc-xload: Add bigendian support
` [PATCH 5/5] esdhc-xload: check for PRSSTAT_BREN only after each block
[PATCH] ARM: Fix cpu_info for armv8
2019-03-04 11:33 UTC
[PATCH] include/phy: Add missing modes
2019-03-04 11:31 UTC
[PATCH] fs: ubifs: Remove unused crc16 functions
2019-03-04 10:39 UTC
[PATCH 00/10] i2c: i.MX more cleanup, early driver
2019-03-04 9:18 UTC (11+ messages)
` [PATCH 01/10] i2c: i.MX: remove unnecesary define
` [PATCH 02/10] i2c: i.MX: remove unnecessary ifdef
` [PATCH 03/10] i2c: i.MX: Fix FSL_I2C_DFSRR register offset
` [PATCH 04/10] i2c: i.MX: remove unnecessary ifdef
` [PATCH 05/10] i2c: i.MX: Consolidate status polling loops
` [PATCH 06/10] i2c: i.MX: stop after read only in last transfer of a message
` [PATCH 07/10] i2c: i.MX: remove unused define
` [PATCH 08/10] i2c: i.MX: Read clock-frequency from device tree
` [PATCH 09/10] i2c: i.MX: Create header file for register defines
` [PATCH 10/10] i2c: i.MX: Add early driver for use in PBL
Loading Barebox to RAM
2019-03-04 8:11 UTC (3+ messages)
[PATCH] i.MX habv3: add missing includes and make locally used function static
2019-03-04 8:06 UTC (2+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox