selected processor does not support `rev r7,r7'
2019-03-21 8:49 UTC (7+ messages)
[PATCH] ARM: Makefile.imx: group and sort board entries
2019-03-21 7:48 UTC (2+ messages)
[PATCH] treewide: surround Kconfig file paths with double quotes
2019-03-21 7:36 UTC (2+ messages)
[PATCH] linux/kernel.h: split *_MAX and *_MIN macros into <linux/limits.h>
2019-03-21 7:34 UTC (4+ messages)
[PATCH] ARM: zii-common: reuse i210 config check for RDU3
2019-03-21 7:22 UTC (2+ messages)
[PATCH] elf: add 64 bits elf support
2019-03-20 16:28 UTC (4+ messages)
[PATCH 00/15] barebox Layerscape support
2019-03-20 8:16 UTC (18+ messages)
` [PATCH 01/15] mci: imx-esdhc: Actually enable cache snooping
` [PATCH 02/15] Add Freescale QUICC Engine firmware support
` [PATCH 03/15] net: Add Freescale FMan ethernet support
` [PATCH 04/15] ARM: Add arm64 pbl udelay
` [PATCH 05/15] esdhc-xload: Add support for Layerscape
` [PATCH 06/15] watchdog: imx: Add register accessor functions
` [PATCH 07/15] watchdog: imx: Add big endian register access support
` [PATCH 08/15] scripts: Add Layerscape image tool
` [PATCH 09/15] i2c: i.MX: Add layerscape support
` [PATCH 10/15] ddr: fsl: Add Freescale ddr driver
` [PATCH 11/15] ARM: Add basic Layerscape support
` [PATCH 12/15] clk: Add Layerscape clk support
` [PATCH 13/15] ARM: Layerscape: Add LS1046a RDB board support
` [PATCH 14/15] ARM: Layerscape: Add TQ TQMLS1046a "
` [PATCH 15/15] ARM: Add layerscape_defconfig
[PATCH] ARM: i.MX: extend kindle-mx50 defconfig
2019-03-18 19:54 UTC (5+ messages)
[PATCH] of: Fix reproducible names for #address-cells != 1
2019-03-18 11:54 UTC
[PATCH 00/11] Fix -Wmissing-prototypes warnings
2019-03-18 10:41 UTC (14+ messages)
` [PATCH 01/11] ARM: semihosting: Fix function prototype
` [PATCH 02/11] treewide: Make locally used functions static
` [PATCH 03/11] treewide: Add missing includes
` [PATCH 04/11] ARM: i.MX: external-nand-boot: remove unused i.MX21 entry
` [PATCH 05/11] ARM: boards: Harmonize barebox_arm_reset_vector() prototype
` [PATCH 06/11] ARM: sha256: Remove unused functions
` [PATCH 07/11] ARM: sha256: Remove unused header file
` [PATCH 08/11] ARM: PXA: Provide prototype for pxa_clear_reset_source()
` [PATCH 09/11] bus: mvebu-mbus: Add missing whitespace
` [PATCH 10/11] mfd: twl-core: Add missing prototype for twlcore_get()
` [PATCH 11/11] fs: squashfs: Remove unused function
[PATCH] commands: bootaux: New command bootaux for iMX
2019-03-18 10:15 UTC (8+ messages)
` [PATCH v2] "
[PATCH v2 0/4] MIPS: add relocation support
2019-03-18 9:41 UTC (6+ messages)
` [PATCH v2 1/4] MIPS: relocation: pass ram size to pbl_main_entry
` [PATCH v2 2/4] MIPS: relocation: add relocation support
` [PATCH v2 3/4] MIPS: relocation: do not use configurable memory layout
` [PATCH v2 4/4] MIPS: remove request_sdram_region "fdt"
[PATCH] Revert "fix zbarebox linking with new ld"
2019-03-18 9:13 UTC
[PATCH 1/2] ARM Kindle3 defconfig: enable MMU
2019-03-18 8:52 UTC (3+ messages)
` [PATCH 2/2] ARM Kindle3: switch on pull-ups for fiveway device
[PATCH] ARM: Makefile: restore kindle3 imxcfg-y setting
2019-03-18 8:52 UTC (2+ messages)
[PATCH v2] mci: imx-esdhc: resolve conflicting flags
2019-03-18 8:50 UTC (2+ messages)
[PATCH] mci: imx-esdhc: resolve conflicting flags
2019-03-18 8:48 UTC (2+ messages)
[PATCH] ARM: dts: mx8mq-phytec-phycore-som: Add watchdog
2019-03-18 8:46 UTC (2+ messages)
[PATCH] mci: imx-esdhc-pbl: initialize is_be
2019-03-18 8:45 UTC (2+ messages)
[PATCH 01/15] ramoops: probe from device tree if OFTREE is enabled
2019-03-18 8:44 UTC (16+ messages)
` [PATCH 02/15] pstore/ram: add Device Tree bindings
` [PATCH 03/15] ramoops: use DT reserved-memory bindings
` [PATCH 04/15] pstore: Make ramoops_init_przs generic for other prz arrays
` [PATCH 05/15] pstore/ram: Do not use stack VLA for parity workspace
` [PATCH 06/15] pstore: improve error report for failed setup
` [PATCH 07/15] pstore/ram: Clarify resource reservation labels
` [PATCH 08/15] pstore: Extract common arguments into structure
` [PATCH 09/15] pstore: add console support
` [PATCH 10/15] pstore: Switch pstore_mkfile to pass record
` [PATCH 11/15] pstore: Replace arguments for read() API
` [PATCH 12/15] pstore: Replace arguments for write() API
` [PATCH 13/15] pstore: pass ramoops configuration to kernel via device tree
` [PATCH 14/15] pstore: ramoops: allow zapping invalid buffers in read-only mode
` [PATCH 15/15] pstore/doc: fix layout
[PATCH] common: extend BOOTM_FITIMAGE_SIGNATURE help text
2019-03-18 8:08 UTC (2+ messages)
[PATCH] drivers: video: Fix parsing oftree timings
2019-03-18 8:07 UTC (2+ messages)
[PATCH 1/6] ARM: add Zii common directory and move switch reset command
2019-03-18 8:06 UTC (7+ messages)
` [PATCH 2/6] ARM: zii-common: add support for switch reset on RDU1
` [PATCH 3/6] ARM: zii-common: introduce RDU part-number based fixup abstraction
` [PATCH 4/6] ARM: zii-common: fetch network config from SP
` [PATCH 5/6] ARM: rdu2: Add p/n based fixups for touchscreen and display panel
` [PATCH 6/6] ARM: rdu2: patch DSA config
[PATCH v2] usb: dwc3: Toggle GCTL.CORESOFTRESET as a first step
2019-03-18 8:03 UTC (2+ messages)
[PATCH 1/2] ARM: i.MX7: Make sure CNTFRQ is initialized early enough
2019-03-18 8:02 UTC (3+ messages)
` [PATCH 2/2] ARM: i.MX8MQ: Don't use cpu_is_mx8mq() at core_initcall level
[PATCH 0/6] ZynqMP clock driver
2019-03-18 7:50 UTC (8+ messages)
` [PATCH 1/6] of: populate "/firmware" while populating device tree
` [PATCH 2/6] ARM: zynqmp: populate zynqmp_firmware dt node
` [PATCH 3/6] ARM: zynqmp: move PAYLOAD_ARG_CNT to firmware header
` [PATCH 4/6] clk: add ZynqMP clock driver
` [PATCH 5/6] ARM: zynqmp: add firmware DT node
` [PATCH 6/6] ARM: zynqmp: switch to firmware clock driver
[help][bootchooser][device-tree] create an update system with yocto and rauc
2019-03-15 9:05 UTC
[PATCH] dtc: disable noisy warnings
2019-03-14 17:51 UTC
[PATCH 1/6] include: add SPDX GPL-2.0-only license tags where applicable
2019-03-13 9:42 UTC (5+ messages)
[RFC][PATCH] pbl multiimage: Allow to check image sizes
2019-03-13 9:32 UTC
[PATCH 0/3] Earlycon command line option support
2019-03-13 8:45 UTC (6+ messages)
` [PATCH 1/3] console: Add plumbing to expose earlycon/bootconsole parameter
` [PATCH 2/3] serial: i.MX: Add code to export "earlycon" setting
` [PATCH 3/3] serial: lpuart: "
[PATCH] libfile: Make use of write_full() in copy_file()
2019-03-13 8:42 UTC (2+ messages)
[PATCH 1/2] commands: memcpy: Make use of write_full()
2019-03-13 8:41 UTC (3+ messages)
` [PATCH 2/2] commands: memcpy: Make use of min_t()
[PATCH 1/2] ARM: zii-vf610-dev: Add ZII SPB4 board
2019-03-13 8:40 UTC (3+ messages)
` [PATCH 2/2] ARM: zii-vf610-dev: Switch SCU4 AIB board to use upstream DTS
[PATCH 1/3] fs: ramfs: Drop unused 'handle' filed from struct ramfs_inode
2019-03-13 8:37 UTC (4+ messages)
` [PATCH 2/3] fs: ramfs: Drop unused 'chunks' conter
` [PATCH 3/3] fs: ramfs: Drop unnecessary check in ramfs_mknod()
[PATCH 00/14] Add initial STMicroelectronics MP1 support
2019-03-13 8:35 UTC (17+ messages)
` [PATCH 01/14] clk: clk-composite: return parent_rate if no rate clk
` [PATCH 02/14] clk: parent_names should be const
` [PATCH 03/14] clk: export clk_gate_is_enabled()
` [PATCH 04/14] clk: Make CLK_IGNORE_UNUSED generic
` [PATCH 05/14] clk: Support CLK_IS_CRITICAL flag
` [PATCH 06/14] clk: divider: pass divider flags
` [PATCH 07/14] clk: divider: Support CLK_DIVIDER_READ_ONLY flag
` [PATCH 08/14] clk: mux: Support mux specific flags
` [PATCH 09/14] clk: mux: Support CLK_MUX_READ_ONLY flag
` [PATCH 10/14] clk: mux: Support CLK_SET_RATE_NO_REPARENT flag
` [PATCH 11/14] ARM: stm32mp1: Add clk driver
` [PATCH 12/14] ARM: stm32mp1: Add serial driver
` [PATCH 13/14] clocksource: Enable architected timer support for CPU_V7
` [PATCH 14/14] ARM: Add initial STM32MP1 support
[PATCH] usb: dwc3: Toggle GCTL.CORESOFTRESET as a first step
2019-03-12 1:48 UTC (3+ messages)
[PATCH 1/3] net: phy: Add PHY_ID_MATCH_* macros
2019-03-11 13:21 UTC (3+ messages)
` [PATCH 2/3] net: phy: Add register access helper functions for phys
` [PATCH 3/3] realtek phy driver
[PATCH 0/5] ARM: rpi: refactor debug_ll
2019-03-11 7:25 UTC (9+ messages)
` [PATCH 4/5] ARM: rpi: move debug UART Kconfig settings
` [PATCH 5/5] ARM: rpi: Add mini UART debug_ll support
` [HELP] Kernel + initrd in FIT
[PATCH v2 0/2] ARM: rpi: refactor debug UART Kconfig settings
2019-03-11 7:14 UTC (3+ messages)
` [PATCH v2 2/2] common: Kconfig: improve help text for DEBUG_LL
[PATCH 00/26] USB storage improvements
2019-03-11 7:11 UTC (19+ messages)
` [PATCH 10/26] usb: storage: Share code for READ(10) and WRITE(10)
` [PATCH 11/26] usb: storage: Make usb_stor_request_sense() a standalone function
` [PATCH 12/26] usb: storage: Remove unused variables
` [PATCH 13/26] usb: storage: Drop struct SCSI_cmd_block
` [PATCH 14/26] usb: hub: Do not include <scsi.h>
` [PATCH 15/26] ata: ahci: "
` [PATCH 16/26] usb: storage: Drop unused fields in struct us_data
` [PATCH 17/26] usb: storage: Drop unused us_blkdev_list
` [PATCH 18/26] usb: storage: Introduce usb_stor_transport()
` [PATCH 19/26] usb: storage: Use put_unaligned_be* helpers
` [PATCH 20/26] usb: Drop usb_disable_asynch()
` [PATCH 21/26] usb: storage: Drop unnecessary check in usb_stor_blk_io()
` [PATCH 22/26] usb: storage: Drop needless macro
` [PATCH 23/26] usb: storage: Use simple boolean to speficy read vs. write operation
` [PATCH 24/26] usb: storage: Simplify I/O loop in usb_stor_blk_io()
` [PATCH 25/26] usb: storage: Drop unnecessary assignment
` [PATCH 26/26] usb: storage: Inline usb_limit_blk_cnt()
[PATCH 00/17] lseek related fixes
2019-03-11 6:56 UTC (2+ messages)
[PATCH 1/2] images: pbl: verify CONFIG_BAREBOX_MAX_IMAGE_SIZE is not exceeded
2019-03-07 10:45 UTC (4+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox