[PATCH 0/6] OMAP updates
2019-08-28 10:24 UTC (5+ messages)
` [PATCH 1/6] ARM: omap: am35xx_emif4: Fix bit polling
` [PATCH 2/6] mtd: nand: gpmc: Add support for ELM
` [PATCH 5/6] mtd: peb: Add function to write file
` [PATCH 6/6] ARM: OMAP: bbu: Add an all-in-one NAND update handler
[PATCH v2 00/10] Add initial support for -fsanitize={ubsan,asan}
2019-08-27 15:09 UTC (11+ messages)
` [PATCH v2 01/10] Kconfig: create Kconfig symbol for ARCH_HAS_STACK_DUMP
` [PATCH v2 02/10] Kconfig: create Kconfig symbol for ARCH_HAS_DATA_ABORT_MASK
` [PATCH v2 03/10] blackfin: delete unused <asm/barebox.h> definitions
` [PATCH v2 04/10] Kconfig: retire empty <asm/barebox.h>
` [PATCH v2 05/10] lib: add HAVE_EFFICIENT_UNALIGNED_ACCESS Kconfig option
` [PATCH v2 06/10] common: add generic CONFIG_UBSAN plumbing
` [PATCH v2 07/10] commands: add intentionally UB triggering ubsan command
` [PATCH v2 08/10] sandbox: use sanitizer unwind for dump_stack if available
` [PATCH v2 09/10] common: add generic CONFIG_KASAN option
` [PATCH v2 10/10] sandbox: support Address and UndefinedBehavior sanitizers
[PATCH 0/6] sandbox: add HWRNG driver for host /dev/random
2019-08-27 14:32 UTC (7+ messages)
` [PATCH 1/6] sandbox: include header to provide missing prototype
` [PATCH 2/6] sandbox: remove unused ARCH_LINUX Kconfig symbol
` [PATCH 3/6] sandbox: redefine optarg and optind to avoid collisions
` [PATCH 4/6] sandbox: compile with symbol -fvisibility=hidden
` [PATCH 5/6] sandbox: hostfile: allow probing from device tree
` [PATCH 6/6] hwrng: add sandbox driver interface to host /dev/random
MMC hardware partitioning
2019-08-27 13:38 UTC
[PATCH 1/2] reset_source: use instance = -1 as default
2019-08-27 4:52 UTC (5+ messages)
` [PATCH 2/2] reset_source: drop reset_source_set_instance()
[PATCH] ARM: zii-vf610-dev: Use CTRL-C as autoboot abort
2019-08-26 20:02 UTC
[PATCH] ARM: dts: vf610-zii-cfu1: Fix indentation
2019-08-26 19:47 UTC
[PATCH v1 1/3] MIPS: ath79: enable watchdog support
2019-08-26 11:38 UTC (3+ messages)
` [PATCH v1 2/3] MIPS: dts: dpt-module: fix gpio button
` [PATCH v1 3/3] MIPS: ath79: enable gpio key support
[PATCH 00/11] treewide: fix some ARCH=arm clang warnings
2019-08-26 10:35 UTC (19+ messages)
` [PATCH 01/11] linux/kbuild.h: sync with upstream
` [PATCH 02/11] ratp: fix use of %hu for printing int
` [PATCH 03/11] complete: remove unused variable
` [PATCH 1/2] fixup! "
` [PATCH 2/2] ata: fix mismatched header guards
` [PATCH 04/11] i2c-mux-pca954x: remove use of uninitialized variable
` [PATCH 05/11] net: phy: mv88e6xxx: remove duplicate member in struct initializer
` [PATCH 06/11] smc911x: fix inverted poll-for-ready
` [PATCH 07/11] nvme: use 64 bit types for timeouts even on 32 bit systems
` [PATCH 08/11] usb: gadget: fsl_udc: remove always-true null pointer checks
` [PATCH 09/11] commands: mmc_extcsd: describe missing bit
` [PATCH 10/11] gui: png_lode: fix freeing of uninitialized pointer
` [PATCH 11/11] fs: fat: fix use of wrong enumeration type
` [PATCH] ARM: don't use -no-thumb-interwork if unavailable
[PATCH] images/.gitignore: ignore i.MX8MQ HAB files
2019-08-26 4:40 UTC
[PATCH v2 0/7] clean up and complement reset source handling
2019-08-25 15:58 UTC (8+ messages)
` [PATCH v2 1/7] reset_source: use instance = -1 as default
` [PATCH v2 2/7] reset_source: fix ordering of exported functions
` [PATCH v2 3/7] reset_source: drop reset_source_set_instance()
` [PATCH v2 4/7] reset_source: implement helper to set a device as reset source
` [PATCH v2 5/7] mfd: da9053: use new reset_source_set_device()
` [PATCH v2 6/7] mfd: da9063: "
` [PATCH v2 7/7] oftree: expose reset_source device in device tree
[PATCH 0/5] sandbox: support -fsanitize={address,ubsan}
2019-08-23 12:31 UTC (10+ messages)
` [PATCH 1/5] sandbox: include header to provide missing prototype
` [PATCH 2/5] common: add generic CONFIG_UBSAN_SANITIZE_ALL plumbing
` [PATCH 3/5] common: add generic CONFIG_KASAN option
` [PATCH 4/5] sandbox: support Address and UndefinedBehavior sanitizers
` [PATCH 5/5] commands: fix unaligned accesses of aliased commands on amd64
[PATCH v2 1/3] console: don't count newlines twice in bytes written
2019-08-23 9:28 UTC (11+ messages)
` [PATCH v2 2/3] ratp: return 0 bytes written from puts if busy
` [PATCH v2 3/3] console: fix out-of-bounds read in dputc(/dev/*, ...)
[PATCH v3] console: fix out-of-bounds read in dputc(/dev/*, ...)
2019-08-23 9:25 UTC
[PATCH] Documentation: zii-vf610-dev: Fix 'halt' in openocd configuration script
2019-08-23 8:58 UTC (3+ messages)
[PATCH v4 1/5] i.mx6: signed boot: add habv4-imx6-gencsf.h to the flash header of the PHYTEC boards
2019-08-23 8:57 UTC (6+ messages)
` [PATCH v4 2/5] imx6: added fit image signature to the devicetree for "
` [PATCH v4 3/5] Kconfig: add selection for creation of signed/encrypted HABV4 images
` [PATCH v4 4/5] Makefile.imx: add build_imx_habv4img for creation of signed/encrypted images
` [PATCH v4 5/5] Makefile.imx: change image creation to build_imx_habv4img for i.MX6
[PATCH 0/8] i.MX8 EVK patches
2019-08-23 8:11 UTC (20+ messages)
` [PATCH 1/8] ARM: aarch64: Fixup relocation table for the second relocation
` [PATCH 2/8] ARM: aarch64: Fix get_runtime_offset after relocation
` [PATCH 3/8] pbl: Move piggy verification into pbl_barebox_uncompress()
` [PATCH 4/8] ARM: i.MX: imx8-ddrc: Remove debug code
` [PATCH 5/8] ARM: nxp-imx8mq-evk: Remove duplicate call to imx8mq_cpu_lowlevel_init()
` [PATCH 6/8] ARM: nxp-imx8mq-evk: Replace trampoline
` [PATCH 7/8] ARM: i.MX8: Fix piggydata loading
` [PATCH 8/8] ARM: nxp-imx8mq-evk: Update comments
[PATCH 1/4] startup: allow ctrl+c abort during boot sequence
2019-08-23 7:55 UTC (5+ messages)
` [PATCH 2/4] libfile: have write_full return a descriptive error code
` [PATCH 3/4] ARM: i.MX: bbu: early exit when partition too small
` [PATCH 4/4] fs: omap4_usbbootfs: remove commented out code
[PATCH RFC 0/3] fs: tftp: don't use cached dentries
2019-08-23 7:38 UTC (5+ messages)
` [PATCH RFC 1/3] fs: tftp: remove duplicate header
` [PATCH RFC 2/3] fs: provide no_revalidate_d_ops for network file systems
` [PATCH RFC 3/3] fs: tftp: don't maintain tftp dentries in dcache
[PATCH] startup: Register autoboot variables earlier
2019-08-23 7:09 UTC (2+ messages)
[PATCH] startup: Fix typo in comment
2019-08-23 7:08 UTC (2+ messages)
[PATCH v1 0/4] extend support for SAMA5D27 SOM1 EK
2019-08-21 6:52 UTC (8+ messages)
` [PATCH v1 1/4] serial: atmel: set linux_console_name
` [PATCH v1 2/4] mtd: spi-nor: add UNLOCK_GLOBAL_BLOCK support
` [PATCH v1 3/4] mtd: spi-nor: add support for sst26vf series
` [PATCH v1 4/4] spi: add atmel-quadspi support
v2019.08.1
2019-08-21 6:49 UTC
[PATCH 1/4] ARM: socfpga: fix xload on arria10
2019-08-21 6:45 UTC (5+ messages)
` [PATCH 2/4] ARM: Arria10: achilles: fix offsets in node names
` [PATCH 3/4] ARM: Arria10: achilles: add named partitions
` [PATCH 4/4] ARM: achilles: add bbu handler
[PATCH] serial: stm32: set linux_console_name
2019-08-21 6:43 UTC (2+ messages)
[PATCH 0/8] Add support for a generic DT based 2nd stage ARM image
2019-08-19 14:09 UTC (13+ messages)
` [PATCH 1/8] dtc: Update update-dtc-source.sh from Linux
` [PATCH 2/8] scripts/dtc: Update to upstream version v1.5.0
` [PATCH 3/8] pbl: Implement strrchr
` [PATCH 4/8] Compile libfdt for barebox
` [PATCH 5/8] common: return "none" when board unset
` [PATCH 6/8] ARM: Add generic device tree 2nd stage support
` [PATCH 7/8] ARM: i.MX: Do not hang() on unknown SoCs
` [PATCH 8/8] ARM: i.MX: When generic DT image is enabled do not hardcode SoC
mips : How to run barebox by bootm in ram(u-boot command)?
2019-08-19 13:40 UTC
[PATCH v3 1/4] i.mx6: signed boot: add habv4-imx6-gencsf.h to the flash header of the PHYTEC boards
2019-08-19 8:28 UTC (7+ messages)
` [PATCH v3 4/4] Makefile: add creation of signed/encrypted images for imx6, imx7, imx8
[PATCH 1/5] nvmem: Use helper variable in nvmem_register_cdev()
2019-08-16 11:43 UTC (6+ messages)
` [PATCH 2/5] nvmem: Use already existing dev pointer "
` [PATCH 3/5] nvmem: Parse partitions information
` [PATCH 4/5] eeprom: at24: Drop at24_cdev_protect()
` [PATCH 5/5] eeprom: at24: Convert the driver to NVMEM
[PATCH v1 1/2] net: macb: init multiple dummy TX queues
2019-08-16 11:42 UTC (4+ messages)
` [PATCH v1 2/2] net: macb: extend support to Microchip SAMA5D2
v2019.08.0
2019-08-14 8:47 UTC
[PATCH 0/4] i.MX1/scb9328 patches
2019-08-14 8:16 UTC (5+ messages)
` [PATCH 1/4] pinctrl: i.MX iomux-v1: Make base address initialization unnecessary
` [PATCH 2/4] pinctrl: i.MX iomux-v1: Add i.MX1 support
` [PATCH 3/4] serial: i.MX: Add i.MX1 lowlevel init function
` [PATCH 4/4] ARM: i.MX: scb9328: refurbish board suport
[PATCH v3 00/10] Add initial RISC-V architecture support
2019-08-12 9:01 UTC (5+ messages)
` [PATCH v3 09/10] scripts: add nmon-loader
[PATCH 1/2] Documentation: imx8mq-evk: fix typo (s/NXM/NXP/)
2019-08-12 7:08 UTC (4+ messages)
` [PATCH 2/2] Documentation: add imx6ull-evk boot mode documentation
` [PATCH] fixup! "
[PATCH] kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
2019-08-12 7:02 UTC (2+ messages)
[PATCH 1/2] riscv: use generic bitsperlong.h
2019-08-12 7:02 UTC (3+ messages)
` [PATCH 2/2] mips: "
[PATCH] kconfig: update to Linux 5.3-rc3
2019-08-12 7:02 UTC (2+ messages)
[PATCH 1/2] mtd: nand: mxs: add helper to calculate the page size
2019-08-08 13:03 UTC (4+ messages)
` [PATCH 2/2] mtd: nand: mxs: sync page_size information
[PATCH v3 00/16] HAB for i.MX8MQ
2019-08-08 7:43 UTC (15+ messages)
` [PATCH v3 06/16] esdhc-pbl: add piggy load function
` [PATCH v3 08/16] scripts: imx: support signing for i.MX8MQ
` [PATCH v3 09/16] images: always build sha256sum into pbl
` [PATCH v3 10/16] pbl: add sha256 and piggy verification to PBL
` [PATCH] fixup! "
` [PATCH v3 11/16] stdio: puts and putchar static inline wrappers
` [PATCH v3 13/16] arm: uncompress: verify sha256 if enabled
` [PATCH v3 14/16] mach-imx: add gencsf header for i.MX8MQ
` [PATCH v3 15/16] mach-imx: hab: select piggy verification for i.MX8
` [PATCH v3 16/16] boards: nxp-mx8-evk: rework to different boot flow
[PATCH] crypto: caam - Always do rng selftest
2019-08-06 7:19 UTC (3+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox