mail archive of the barebox mailing list
 help / color / mirror / Atom feed
[PATCH 00/10] Add Raspberry Pi USB support
 2019-12-20 14:32 UTC  (11+ messages)
` [PATCH 01/10] usb: Make timeout unit clear
` [PATCH 02/10] of: Add of_bus_n_xxx_cells()
` [PATCH 03/10] device: Introduce dma_offset
` [PATCH 04/10] of: Read dma_offset from device tree
` [PATCH 05/10] usb: Add usbroothubdes.h
` [PATCH 06/10] regulator: add function to get regulator by its name
` [PATCH 07/10] rpi: Enable USB Power domain during startup
` [PATCH 08/10] usb: Forward error code from usb_set_configuration
` [PATCH 09/10] usb: Add dwc2 host driver
` [PATCH 10/10] ARM: rpi_defconfig: Enable networking support

[PATCH 1/4] ARM: nxp-imx8mq-evk: switch to SPDX license header
 2019-12-19 15:19 UTC  (4+ messages)
` [PATCH 2/4] ARM: nxp-imx8mq-evk: switch the PBL memcpy parameters to common variables
` [PATCH 3/4] ARM: nxp-imx8mq-evk: clean up nxp_imx8mq_evk_start
` [PATCH 4/4] ARM: nxp-imx8mq-evk: fix bootflow comment

[PATCH] fixup! ARM: zii-imx8mq-dev: add DT fixups
 2019-12-19 11:06 UTC 

[PATCH] driver: add function to look up device by DT node
 2019-12-19 10:55 UTC  (3+ messages)

[PATCH 0/3] ARM64 early cache fixes
 2019-12-19  9:13 UTC  (4+ messages)
` [PATCH 1/3] ARM64: entry: save/restore potentially clobbered registers
` [PATCH 2/3] ARM: cache_64: invalidate dcache in arm_early_mmu_cache_invalidate
` [PATCH 3/3] ARM: cache_64: invalidate icache in arm_early_mmu_cache_flush

[PATCH v2] lds: align RO_DATA_SECTION members
 2019-12-19  9:01 UTC 

USB type-A in imx8mm
 2019-12-19  7:20 UTC 

[PATCH] ARM: rpi: Do not warn when firmware doesn't pass a dtb
 2019-12-19  4:48 UTC 

[PATCH 1/4] clk: zynq: add QSPI reference clock
 2019-12-18 22:43 UTC  (4+ messages)
` [PATCH 2/4] spi: add Zynq QSPI controller driver
` [PATCH 3/4] ARM: zynq: add QSPI DT node
` [PATCH 4/4] ARM: zynq: zed: add QSPI flash support

[PATCH 1/3] ARM: zii-imx8mq-dev: make eMMC update target the default
 2019-12-18 15:13 UTC  (9+ messages)
` [PATCH 2/3] ARM: zii-imx8mq-dev: add DT fixups
` [PATCH 3/3] ARM: zii-imx8mq-dev: fixup touchscreen and ethernet switch alias

[PATCH] ARM: aarch64: Add support for passing initrd to Linux
 2019-12-18 15:08 UTC 

[PATCH v2] habv4: imx change signing area from full to the executed image
 2019-12-18 12:57 UTC 

[PATCH] ARM: rdu1: add default environment
 2019-12-18  7:32 UTC  (2+ messages)

[PATCH 1/3] RDU2: add support to boot from SD card autonomosly
 2019-12-18  7:31 UTC  (4+ messages)
` [PATCH 2/3] ARM: rdu2: don't reduce i2c frequency for eGalax touch
` [PATCH 3/3] ARM: rdu2: fixup touchscreen alias

[PATCH] ARM: rdu-common: restart machine after fixing i210 device ID
 2019-12-18  7:30 UTC  (2+ messages)

imx-usb-loader on imx8mq/mm
 2019-12-13 14:24 UTC  (5+ messages)

[PATCH 0/4] add discard_range to improve write speed on block devices
 2019-12-13 13:20 UTC  (5+ messages)
` [PATCH 1/4] fs: Introduce discard_range()
` [PATCH 2/4] cdev: Add discard_range hook
` [PATCH 3/4] block: Implement discard_range
` [PATCH 4/4] copy_file: call discard_range on destination file

[BUG] imx6qdl: degraded eMMC write performance
 2019-12-13 13:12 UTC  (6+ messages)

[PATCH 1/2] ARM: omap: support for WAGO PFC200v3 750-821x
 2019-12-13  9:39 UTC  (4+ messages)
` [PATCH 2/2] ARM: omap: reword MACH_WAGO_PFC_AM35XX kconfig help text

[PATCH] commands: led: print actual error code when led_set fails
 2019-12-13  8:27 UTC  (2+ messages)

[PATCH] led: pca955x: remove ineffectual assignment
 2019-12-13  8:27 UTC  (2+ messages)

[PATCH] commands: miitool: handle powerdown-flag
 2019-12-13  8:26 UTC  (2+ messages)

[PATCH] habv4: add the possibility to changing the signing area from Kconfig
 2019-12-13  8:25 UTC  (6+ messages)

[PATCH v3 1/7] ARM: dts: imx6: pcaaxl3: Order nodes alphabetically
 2019-12-12  7:23 UTC  (8+ messages)
` [PATCH v3 2/7] ARM: dts: imx6: pcaaxl3: Update license and model description
` [PATCH v3 3/7] ARM: dts: imx6: pcaaxl3: Make use of the simpler name phycard
` [PATCH v3 4/7] ARM: dts: imx6: phycard: Make eeprom configurable
` [PATCH v3 5/7] ARM: dts: imx6: phycard: Switch to new partitions binding
` [PATCH v3 6/7] ARM: dts: imx6: phycard: Use gpio binding constants
` [PATCH v3 7/7] ARM: dts: imx6: phytec: Increase NAND barebox partition size

[PATCH 1/4] ARM: zynq: zedboard: split out PS7 init
 2019-12-11  8:52 UTC  (5+ messages)
` [PATCH 2/4] ARM: zynq: zedboard: allow lowlevel init to be called as second stage
` [PATCH 3/4] filetype: add Zynq image type
` [PATCH 4/4] ARM: zynq: add Zynq image bootm handler

[PATCH 1/1] mci: imx-esdhc: fix termination of statement
 2019-12-11  8:49 UTC  (2+ messages)

[PATCH v2] Allow usage of default environment without environment file storage
 2019-12-11  8:48 UTC  (2+ messages)

[PATCH] of: demote most debug output to loglevel 8 (vdebug)
 2019-12-11  8:43 UTC  (2+ messages)

[PATCH] commands: digest: don't be to restrictive with the length of verification files
 2019-12-11  8:41 UTC  (2+ messages)

[PATCH 1/4] led: unify led trigger tables
 2019-12-11  8:39 UTC  (5+ messages)
` [PATCH 2/4] led: add documentation for net-tx and net-rx triggers
` [PATCH 3/4] led: check for 'barebox, default-trigger' when 'linux, default-trigger' is not found
` [PATCH 4/4] led: parse panic-indicator from device-tree

[PATCH v2] firmware: zynqmp-fpga: drop example bin format header
 2019-12-11  8:28 UTC  (2+ messages)

[PATCH] mtd: spi-nor: Add support for en25qh64
 2019-12-11  8:27 UTC  (2+ messages)

[PATCH v2 1/3] images: i.MX: rearrange image rules in preparation for boilerplate removal
 2019-12-11  8:27 UTC  (4+ messages)
` [PATCH v2 2/3] ARM: i.MX: introduce imx_image_rule variable for code deduplication
` [PATCH v2 3/3] ARM: i.MX: rebuild .imximg if DCD table in .imxcfg changes

[PATCH v2 1/8] ARM: dts: imx6: pcaaxl3: Order nodes alphabetically
 2019-12-10 13:38 UTC  (14+ messages)
` [PATCH v2 2/8] ARM: dts: imx6: pcaaxl3: Update license and model description
` [PATCH v2 3/8] ARM: dts: imx6: pcaaxl3: Make use of the simpler name phycard
` [PATCH v2 4/8] ARM: dts: imx6: phycard: Make eeprom configurable
` [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
` [PATCH v2 6/8] ARM: dts: imx6: phycard: Switch to new partitions binding
` [PATCH v2 7/8] ARM: dts: imx6: phycard: Use gpio binding constants
` [PATCH v2 8/8] ARM: dts: imx6: phytec: Increase NAND barebox partition size

[PATCH] firmware: zynmp-fpga: drop example bin format header
 2019-12-10 11:11 UTC  (2+ messages)

[PATCH 1/3] images: i.MX: rearrange image rules in preparation for boilerplate removal
 2019-12-09 13:32 UTC  (6+ messages)
` [PATCH 2/3] ARM: i.MX: introduce imx_image_rule variable for code deduplication
` [PATCH 3/3] ARM: i.MX: rebuild .imximg if DCD table in .imxcfg changes

[PATCH v2 1/4] imd: replace magicvalue with sizeof(struct)
 2019-12-09 11:39 UTC  (5+ messages)
` [PATCH v2 2/4] image-metadata: add flags field to imd_header
` [PATCH v2 3/4] imd: add support for checksum generation/verification
` [PATCH v2 4/4] commands: bbu: add support for imd checksum

v2019.12.0
 2019-12-09 11:29 UTC 

[PATCH 1/7] ARM: dts: imx6: pcaaxl3: Order nodes alphabetically
 2019-12-09 10:48 UTC  (9+ messages)
` [PATCH 2/7] ARM: dts: imx6: pcaaxl3: Update license and model description
` [PATCH 3/7] ARM: dts: imx6: pcaaxl3: Make use of the simpler name phycard
` [PATCH 4/7] ARM: dts: imx6: phycard: Make eeprom configurable
` [PATCH 5/7] ARM: dts: imx6: phycard: Use partname for environment device-path
` [PATCH 6/7] ARM: dts: imx6: phycard: Switch to new partitions binding
` [PATCH 7/7] ARM: dts: imx6: phytec: Increase NAND barebox partition size

[PATCH 0/2] bus: efi: add basic ACPI bus infrastructure
 2019-12-09 10:39 UTC  (5+ messages)
` [PATCH 1/2] "
` [PATCH 2/2] misc: add ACPI test driver

[PATCH 0/9] efi: add PCI controller driver
 2019-12-09 10:39 UTC  (11+ messages)
` [PATCH 1/9] efi: add and use new efi_device_has_guid helper
` [PATCH 2/9] driver: add missing parentheses around macro argument
` [PATCH 3/9] efi: fix off-by-one in mem_malloc_init(..., end)
` [PATCH 4/9] x86: efi: lds: don't discard any relocation sections
` [PATCH 5/9] PCI: add driver_data member to struct pci_device_id
` [PATCH 6/9] PCI: copy over some Linux PCI helpers
` [PATCH 7/9] efi: turn set of defines into enumerations
` [PATCH 8/9] pci: add EFI PCI root bridge IO protocol driver
` [PATCH 9/9] serial: add support for PCI NS16550 UARTs

[PATCH] Revert "mci: core: make mci_register -EPROBE_DEFER sensitive"
 2019-12-09 10:15 UTC  (2+ messages)

[PATCH] lds: align RO_DATA_SECTION members
 2019-12-09 10:02 UTC  (3+ messages)

[PATCH] clk: i.MX6ul: Disable GPMI_IO clk before reparenting
 2019-12-09  9:46 UTC 

[PATCH] mtd: spi-nor: fix wrong value for CR_QUAD_EN_SPAN
 2019-12-09  9:33 UTC 

Writing to ubifs
 2019-12-09  8:26 UTC  (2+ messages)

[PATCH] README: add section about contributing to barebox
 2019-12-06 14:26 UTC  (2+ messages)

[PATCH 1/3] scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
 2019-12-06 14:25 UTC  (12+ messages)
` [PATCH v2 1/4] "
  ` [PATCH v2 2/4] dts/scripts: "
  ` [PATCH v2 3/4] docs: "
  ` [PATCH v2 4/4] docs: use #!/usr/bin/env python shebang instead of #!/usr/bin/python
    ` use #!/usr/bin/env binary instead of #!/usr/bin/binary
      ` [PATCH v3 1/4] scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
      ` [PATCH v3 2/4] dts/scripts: "
      ` [PATCH v3 3/4] docs: "
      ` [PATCH v3 4/4] docs: use #!/usr/bin/env python shebang instead of #!/usr/bin/python

[PATCH] ARM: boards: phytec-som-imx6: Replace spi by spi-nor in bootsource script
 2019-12-06 14:24 UTC  (2+ messages)

[PATCH] ARM: dts: imx6qdl: phycore: Remove emmc vmmc-supply
 2019-12-06 14:23 UTC  (6+ messages)

[PATCH 1/3] param: add dev_add_param_tristate(_ro) helpers
 2019-12-05  8:10 UTC  (5+ messages)
` [PATCH 3/3] remoteproc: add .stop device parameter for stopping remote processor

[PATCH] net: designware: eqos: remove done TODO
 2019-12-05  7:55 UTC  (4+ messages)

page:  |  | latest

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox