[PATCH] reset: remove duplicate imx8mq-reset.h and use correct defines
2020-03-23 7:20 UTC (2+ messages)
[PATCH] common: oftree: trim leading spaces from bootargs
2020-03-23 7:19 UTC (2+ messages)
suspicious header files diff
2020-03-20 17:16 UTC (2+ messages)
[PATCH] common: fix typos found with codespell
2020-03-20 9:41 UTC
am335x: load a kernel with integrated initramfs
2020-03-20 8:29 UTC
Barebox for Zedboard
2020-03-19 10:53 UTC (2+ messages)
[PATCH] crypto: pbkdf2: Select HMAC
2020-03-18 18:23 UTC
v2020.03.0
2020-03-18 7:30 UTC
[PATCH] reset: add missing stub for device_reset()
2020-03-17 18:45 UTC (3+ messages)
[PATCH 0/2] Allow parsing more than one memory node
2020-03-17 8:19 UTC (5+ messages)
` [PATCH 1/2] of: base: parse all available memory nodes
` [PATCH 2/2] of: base: allow of_add_memory to be called multiple times
[PATCH] ARM: phytec-som-imx6: Add imx6dl with 512mb RAM
2020-03-16 11:29 UTC (2+ messages)
[PATCH] pinctrl-single: fix parsing of `pinctrl-single, bits` property
2020-03-16 11:27 UTC (2+ messages)
` [PATCH] pinctrl-single: fix parsing of `pinctrl-single,bits` property
[PATCH v3 00/19] Protect code from pollers
2020-03-16 8:04 UTC (22+ messages)
` [PATCH 01/19] net: fec_imx: Do not clear MII interrupt during receive
` [PATCH 02/19] miitool: Use mdiobus_read()
` [PATCH 03/19] net: phy: mdio-mux: Use mdiobus_read/write()
` [PATCH 04/19] net: Open ethernet devices explicitly
` [PATCH 05/19] poller: Give pollers a name
` [PATCH 06/19] poller: Add a poller command
` [PATCH 07/19] Introduce slices
` [PATCH 08/19] net: Add a slice to struct eth_device
` [PATCH 09/19] net: mdiobus: Add slice
` [PATCH 10/19] usb: Add a slice to usb host controllers
` [PATCH 11/19] usbnet: Add slice
` [PATCH 12/19] net: Call net_poll() in a poller
` [PATCH 13/19] net: reply to ping requests
` [PATCH 14/19] usbnet: Be more friendly in the receive path
` [PATCH 15/19] net: phy: Also print link down messages
` [PATCH 16/19] net: ifup command: add ethernet device completion
` [PATCH 17/19] net: phy: Do not claim the link is up initially
` [PATCH 18/19] net: Add ifdown support and command
` [PATCH 19/19] poller: Allow to run pollers inside of pollers
[RFC] serial: ns16550: select default pinctrl state
2020-03-13 11:27 UTC (3+ messages)
[PATCH v2 00/16] Protect code from pollers
2020-03-12 10:29 UTC (21+ messages)
` [PATCH 01/16] net: fec_imx: Do not clear MII interrupt during receive
` [PATCH 02/16] miitool: Use mdiobus_read()
` [PATCH 03/16] net: phy: mdio-mux: Use mdiobus_read/write()
` [PATCH 04/16] net: Open ethernet devices explicitly
` [PATCH 05/16] Introduce slices
` [PATCH 06/16] net: Add a slice to struct eth_device
` [PATCH 07/16] net: mdiobus: Add slice
` [PATCH 08/16] usb: Add a slice to usb host controllers
` [PATCH 09/16] usbnet: Add slice
` [PATCH 10/16] net: Call net_poll() in a poller
` [PATCH 11/16] net: reply to ping requests
` [PATCH 12/16] usbnet: Be more friendly in the receive path
` [PATCH 13/16] net: phy: Also print link down messages
` [PATCH 14/16] net: ifup command: add ethernet device completion
` [PATCH 15/16] net: phy: Do not claim the link is up initially
` [PATCH 16/16] net: Add ifdown support and command
[PATCH 0/3] Support for fastboot over UDP
2020-03-12 8:26 UTC (12+ messages)
` [PATCH 1/3] fastboot: split generic code from USB gadget
` [PATCH 2/3] fastboot net: implement fastboot over UDP
` [PATCH 3/3] fastboot net: workaround for receiving before sending
[PATCH] scripts/bareboximd: add mode argument to open call
2020-03-11 19:42 UTC (3+ messages)
[PATCH 1/5] kbuild: remove unused barebox-head
2020-03-11 15:11 UTC (6+ messages)
` [PATCH 2/5] kbuild: remove dead code for modpost
` [PATCH 3/5] kbuild: rename barebox-pbl-common to BAREBOX_PBL_OBJS
` [PATCH 4/5] kbuild: rename barebox-{common, lds} to BAREBOX_{OBJS, LDS}
` [PATCH 5/5] kbuild: replace barebox-all with BAREBOX_OBJS
[PATCH v2 1/4] ARM: at91: add support for SAM9 SoC reset
2020-03-11 15:07 UTC (5+ messages)
` [PATCH v2 2/4] ARM: at91: sama5d27-som1: clean up lowlevel.c
` [PATCH v2 3/4] ARM: at91: sama5d27-som1: branch to noinline function after stack setup
` [PATCH v2 4/4] ARM: at91: add sama5d27-based Groboards Giant Board support
[PATCH 1/2] ARM: dts: advantech-rom-7421: fix sd-card cd pin
2020-03-11 15:05 UTC (3+ messages)
` [PATCH 2/2] ARM: dts: advantech-rom-7421: Add ocotp node to provide mac address
[PATCH] usb: Add extra delay for device scan
2020-03-11 15:04 UTC (4+ messages)
Protect code from pollers
2020-03-10 10:10 UTC (11+ messages)
` [PATCH 1/8] Introduce slices
` [PATCH 2/8] net: Add a slice to struct eth_device
` [PATCH 3/8] net: mdiobus: Add slice
` [PATCH 4/8] usb: Add a slice to usb host controllers
` [PATCH 5/8] usbnet: Add slice
` [PATCH 6/8] net: Call net_poll() in a poller
` [PATCH 7/8] net: reply to ping requests
` [PATCH 8/8] usbnet: Be more friendly in the receive path
[PATCH 0/2] Documentation: blspec: update documentation
2020-03-09 7:39 UTC (4+ messages)
` [PATCH 1/2] Documentation: blspec: update link to Boot Loader Specification
` [PATCH 2/2] Documentation: blspec: drop documentation of devicetree-overlay
[PATCH v2] of: overlay: rework error message for symbols
2020-03-09 7:38 UTC (2+ messages)
[PATCH 0/2] state: deal gracefully with runtime bucket corruption
2020-03-09 7:36 UTC (4+ messages)
` [PATCH 1/2] state: backend_storage: "
` [PATCH 2/2] state: treat state with all-invalid buckets as dirty
can not compile on ubuntu 18.04 lts for x86
2020-03-09 7:34 UTC (3+ messages)
` 回复: "
[PATCH 1/3] video/ssd1307fb: fix NULL pointer dereference in probe
2020-03-09 7:31 UTC (4+ messages)
` [PATCH 2/3] video/ssd1307fb: drop unneeded regulator NULL checks
` [PATCH 3/3] video/ssd1307fb: make reset GPIO optional
[PATCH 1/3] ARM: nitrogen6x: add phy reset timings
2020-03-09 7:28 UTC (6+ messages)
` [PATCH 2/3] net: phy: micrel: backport finding PHY properties
` [PATCH 3/3] ARM: nitrogen6: remove hard coded values
[PATCH 1/2] ARM: at91: add support for SAM9 SoC reset
2020-03-08 21:38 UTC (7+ messages)
` [PATCH 2/2] ARM: at91: add sama5d27-based Groboards Giant Board support
barebox image for an spi flash (like m25p0) on an imx7 soc
2020-03-06 17:22 UTC (14+ messages)
[PATCH] usb: host: ehci: distinguish DMA addresses
2020-03-05 17:14 UTC (3+ messages)
[PATCH] ARM: dts: phycore-imx6: change mtd-partition names for compatibility with kernel
2020-03-05 13:26 UTC (2+ messages)
Barebox as first and second stage bootloader
2020-03-03 7:03 UTC (11+ messages)
[PATCH] firmware: Fix dependencies for firmware in PBL
2020-03-02 11:55 UTC (2+ messages)
[PATCH 1/3] arm: dts: Fix node names
2020-03-02 9:02 UTC (3+ messages)
` [PATCH 2/3] arm: vf610-zii-scu4-aib: Remove non effective properties
` [PATCH 3/3] ARM: dts: Add missing #size/address-cells properties
[PATCH] reset: add stub for device_reset when CONFIG_RESET_CONTROLLER=n
2020-03-02 8:20 UTC (2+ messages)
[PATCH 0/2] USB fastboot onto eMMC: make 30% faster!
2020-03-02 8:15 UTC (5+ messages)
` [PATCH 1/2] usb: gadget: fastboot: call discard_range for sparse files as well
` [PATCH] fixup! "
` [PATCH 2/2] Revert "block: Adjust cache sizes"
[PATCH 1/2] USB: MUSB: PHY: scrap singleton am335x_get_usb_phy()
2020-03-02 8:12 UTC (2+ messages)
[PATCH 1/2] net: designware: eqos: remove left-over PHY quirk work around
2020-03-02 7:11 UTC (3+ messages)
` [PATCH 2/2] net: designware: eqos: mimic Linux gmac4 mdio_{read, write}
[PATCH v2] Documentation: boards: stm32mp: document eMMC partition layout
2020-03-02 7:08 UTC (2+ messages)
[PATCH] ARM64: add support for booting a FIT image
2020-03-02 7:07 UTC (2+ messages)
[PATCH 2/2] USB: MUSB: defer driver probes where necessary
2020-02-28 10:30 UTC (4+ messages)
` [PATCH] fixup! "
[RFC 0/5] WIP: MIPS: implement dma mapping functions
2020-02-28 5:38 UTC (4+ messages)
` [RFC 4/5] net: rtl8169: make it work on big-endian system
Private: Re: [yocto] #yocto update the kernel with a rauc bundle
2020-02-27 14:51 UTC (8+ messages)
` [RAUC] "
[PATCH] Documentation: boards: stm32mp: document eMMC partition layout
2020-02-27 13:02 UTC
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox