mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrej Picej <>
To: "Stefan Riedmüller" <>,
	"" <>
Cc: "" <>,
	Yunus Bas <>
Subject: Re: [PATCH 2/5] ARM: configs: phytec-som-imx6.config
Date: Wed, 17 Nov 2021 11:08:47 +0100	[thread overview]
Message-ID: <> (raw)
In-Reply-To: <>

Hi Stefan,

I was waiting for your insight.

> You're right, there should be no issue with the BLSPEC config.
> Regarding the IPU driver, I only remember that we had an issue some time ago
> with the IPU driver and since then disable it because we don't make use of it
> in our BSP. But I can't remember what the actual issue was.
> @Andrej, maybe you can take another look at it and see if it can be enabled
> without issues on our boards nowadays. In that case we could drop disabling
> the IPU driver as well.
>>>       - enable of_fixup_status command,
>>>       - enable of_overlay command,
>>>       - enable of_display_timings command and
>>>       - enable OCOTP fuse writing ability.
>> We can enable these in imx_v7_defconfig, no need to overwrite them.
> Sure let's move them to the defconfig then.

This would be the nicest yes. I will check if IPU driver can be left 
enabled, and create a new patch (for imx_v7_defconfig) if this is the case.

Thanks to both of you.


barebox mailing list

  reply	other threads:[~2021-11-17 10:10 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-15 13:02 [PATCH 0/5] PHYTEC patches to be mainlined Andrej Picej
2021-11-15 13:02 ` [PATCH 1/5] flash-header-phytec-pcl063: Set SOC voltage to 1.25 V during boot Andrej Picej
2021-11-15 13:02 ` [PATCH 2/5] ARM: configs: phytec-som-imx6.config Andrej Picej
2021-11-17  7:03   ` Sascha Hauer
2021-11-17  9:59     ` Stefan Riedmüller
2021-11-17 10:08       ` Andrej Picej [this message]
2021-11-15 13:02 ` [PATCH 3/5] regulator: allow use of dummy regulator Andrej Picej
2021-11-17  7:21   ` Sascha Hauer
2021-11-17  8:11     ` Andrej Picej
2021-11-17  9:29       ` Andrej Picej
2021-11-15 13:02 ` [PATCH 4/5] ARM: dts: imx6qdl: pfla02: allow use of dummy regulators Andrej Picej
2021-11-15 13:02 ` [PATCH 5/5] documentation: regulator: add dummy-supply Andrej Picej

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox