mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org, Michael Tretter <m.tretter@pengutronix.de>
Subject: Re: [PATCH v2 7/7] commands: add of_overlay command for device tree overlays
Date: Wed, 11 Sep 2019 10:00:58 +0200	[thread overview]
Message-ID: <cc081a83-3322-208c-c451-ade9d18f91e2@pengutronix.de> (raw)
In-Reply-To: <829b5a88-c52f-5e5f-9987-148bdad90384@pengutronix.de>


On 9/11/19 9:55 AM, Ahmad Fatoum wrote:
> Hello Michael,
> 
> On 9/6/19 3:20 PM, Michael Tretter wrote:
>> Add a new command "of_overlay" for applying device tree overlays,
>> because it does not really fit into any other device tree related
>> command and would create a mess with the command options.
>>
>> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
>>
>> ---
>> Changelog:
>>
>> v1->v2: none
>> ---
>>  commands/Kconfig      | 12 ++++++
>>  commands/Makefile     |  1 +
>>  commands/of_overlay.c | 89 +++++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 102 insertions(+)
>>  create mode 100644 commands/of_overlay.c
>>
>> diff --git a/commands/Kconfig b/commands/Kconfig
>> index 039fd7d1ac..01d82031ad 100644
>> --- a/commands/Kconfig
>> +++ b/commands/Kconfig
>> @@ -2088,6 +2088,18 @@ config CMD_OF_FIXUP_STATUS
>>  	  Register a fixup to enable or disable a device tree node.
>>  	  Nodes are enabled on default. Disabled with -d.
>>  
>> +config CMD_OF_OVERLAY
>> +	tristate
>> +	select OFTREE
> 
> This should depend or select OF_OVERLAY

and FIRMWARE

, otherwise:
> ./commands/of_overlay.c:60: undefined reference to `firmware_load_overlay'
> 
> Cheers
> Ahmad
> 
>> +	prompt "of_overlay"
>> +	help
>> +	  of_overlay - register device tree overlay as fixup
>> +
>> +	  Usage: of_overlay [-S path] FILE
>> +
>> +	  Options:
>> +		  -S path	load firmware using this search path
>> +
>>  config CMD_OFTREE
>>  	tristate
>>  	select OFTREE
>> diff --git a/commands/Makefile b/commands/Makefile
>> index e69fb5046f..62ad9ce2b2 100644
>> --- a/commands/Makefile
>> +++ b/commands/Makefile
>> @@ -78,6 +78,7 @@ obj-$(CONFIG_CMD_OF_NODE)	+= of_node.o
>>  obj-$(CONFIG_CMD_OF_DUMP)	+= of_dump.o
>>  obj-$(CONFIG_CMD_OF_DISPLAY_TIMINGS)	+= of_display_timings.o
>>  obj-$(CONFIG_CMD_OF_FIXUP_STATUS)	+= of_fixup_status.o
>> +obj-$(CONFIG_CMD_OF_OVERLAY)	+= of_overlay.o
>>  obj-$(CONFIG_CMD_MAGICVAR)	+= magicvar.o
>>  obj-$(CONFIG_CMD_IOMEM)		+= iomemport.o
>>  obj-$(CONFIG_CMD_LINUX_EXEC)	+= linux_exec.o
>> diff --git a/commands/of_overlay.c b/commands/of_overlay.c
>> new file mode 100644
>> index 0000000000..f929443bfe
>> --- /dev/null
>> +++ b/commands/of_overlay.c
>> @@ -0,0 +1,89 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2019 Michael Tretter <m.tretter@pengutronix.de>, Pengutronix
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2
>> + * as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <command.h>
>> +#include <common.h>
>> +#include <environment.h>
>> +#include <fdt.h>
>> +#include <firmware.h>
>> +#include <fs.h>
>> +#include <getopt.h>
>> +#include <libfile.h>
>> +#include <of.h>
>> +
>> +static int do_of_overlay(int argc, char *argv[])
>> +{
>> +	int opt, ret;
>> +	struct fdt_header *fdt;
>> +	struct device_node *overlay;
>> +	const char *search_path = NULL;
>> +
>> +	while ((opt = getopt(argc, argv, "S:")) > 0) {
>> +		switch (opt) {
>> +		case 'S':
>> +			search_path = optarg;
>> +			break;
>> +		default:
>> +			return COMMAND_ERROR_USAGE;
>> +		}
>> +	}
>> +
>> +	if (argc != optind + 1)
>> +		return COMMAND_ERROR_USAGE;
>> +
>> +	fdt = read_file(argv[optind], NULL);
>> +	if (!fdt) {
>> +		printf("cannot read %s\n", argv[optind]);
>> +		return 1;
>> +	}
>> +
>> +	overlay = of_unflatten_dtb(fdt);
>> +	free(fdt);
>> +	if (IS_ERR(overlay))
>> +		return PTR_ERR(overlay);
>> +
>> +	if (search_path) {
>> +		ret = firmware_load_overlay(overlay, search_path);
>> +		if (ret)
>> +			goto err;
>> +	}
>> +
>> +	ret = of_register_overlay(overlay);
>> +	if (ret) {
>> +		printf("cannot apply oftree overlay: %s\n", strerror(-ret));
>> +		goto err;
>> +	}
>> +
>> +	return 0;
>> +
>> +err:
>> +	of_delete_node(overlay);
>> +	return ret;
>> +}
>> +
>> +BAREBOX_CMD_HELP_START(of_overlay)
>> +BAREBOX_CMD_HELP_TEXT("Options:")
>> +BAREBOX_CMD_HELP_OPT("-S path", "load firmware using this search path")
>> +BAREBOX_CMD_HELP_END
>> +
>> +BAREBOX_CMD_START(of_overlay)
>> +	.cmd = do_of_overlay,
>> +	BAREBOX_CMD_DESC("register device tree overlay as fixup")
>> +	BAREBOX_CMD_OPTS("[-S path] FILE")
>> +	BAREBOX_CMD_GROUP(CMD_GRP_MISC)
>> +	BAREBOX_CMD_HELP(cmd_of_overlay_help)
>> +BAREBOX_CMD_END
>>
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2019-09-11  8:01 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06 13:20 [PATCH v2 0/7] Device Tree Overlay Support Michael Tretter
2019-09-06 13:20 ` [PATCH v2 1/7] dtc: add -@ option to enable __symbols__ Michael Tretter
2019-09-06 13:20 ` [PATCH v2 2/7] of: add support for devicetree overlays Michael Tretter
2019-09-06 13:20 ` [PATCH v2 3/7] blspec: " Michael Tretter
2019-09-06 13:20 ` [PATCH v2 4/7] of: add iterator for overlays Michael Tretter
2019-09-06 13:20 ` [PATCH v2 5/7] firmware: add support to load firmware from dt overlay Michael Tretter
2019-09-06 13:20 ` [PATCH v2 6/7] blspec: load firmware if specified in " Michael Tretter
2019-09-11  7:53   ` Ahmad Fatoum
2019-09-06 13:20 ` [PATCH v2 7/7] commands: add of_overlay command for device tree overlays Michael Tretter
2019-09-11  7:55   ` Ahmad Fatoum
2019-09-11  8:00     ` Ahmad Fatoum [this message]
2019-09-11  9:28     ` Michael Tretter
2019-09-11  9:33       ` Ahmad Fatoum
2019-09-09  8:57 ` [PATCH v2 0/7] Device Tree Overlay Support Sascha Hauer
2019-09-12  6:57   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cc081a83-3322-208c-c451-ade9d18f91e2@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=m.tretter@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox