mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH] fixup! ARM: at91: add helpers for chain-loading barebox from SD-card
Date: Mon,  6 Jul 2020 08:26:02 +0200	[thread overview]
Message-ID: <20200706062602.10602-1-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <c9be71e8-1b06-7066-57e4-e86287b4e8f7@pengutronix.de>

Drop no longer accurate comment. Use c99 designated initializers.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 arch/arm/mach-at91/xload-mmc.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-at91/xload-mmc.c b/arch/arm/mach-at91/xload-mmc.c
index bc974b6446c7..c031f94aeeef 100644
--- a/arch/arm/mach-at91/xload-mmc.c
+++ b/arch/arm/mach-at91/xload-mmc.c
@@ -40,18 +40,19 @@ static const struct sdhci_instance {
 	u8 periph;
 	s8 pins[15];
 } sdhci_instances[] = {
-	[0] = { SAMA5D2_BASE_SDHC0, SAMA5D2_ID_SDMMC0, AT91_MUX_PERIPH_A,
-		{ 2, 3, 4, 5, 6, 7, 8, 9, 0, 1, 13, 10, 11, 12, -1 } },
-	[1] = { SAMA5D2_BASE_SDHC1, SAMA5D2_ID_SDMMC1, AT91_MUX_PERIPH_E,
-		{ 18, 19, 20, 21, 22, 28, 30, -1 } },
+	[0] = {
+		.base = SAMA5D2_BASE_SDHC0, .id = SAMA5D2_ID_SDMMC0, .periph = AT91_MUX_PERIPH_A,
+		.pins = { 2, 3, 4, 5, 6, 7, 8, 9, 0, 1, 13, 10, 11, 12, -1 }
+	},
+	[1] = {
+		.base = SAMA5D2_BASE_SDHC1, .id = SAMA5D2_ID_SDMMC1, .periph = AT91_MUX_PERIPH_E,
+		.pins = { 18, 19, 20, 21, 22, 28, 30, -1 }
+	},
 };
 
 /**
  * sama5d2_sdhci_start_image - Load and start an image from FAT-formatted SDHCI
  * @r4: value of r4 passed by BootROM
- *
- * Return: If successul, this function does not return. A negative error
- * code is returned when this function fails.
  */
 void __noreturn sama5d2_sdhci_start_image(u32 r4)
 {
-- 
2.27.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2020-07-06  6:26 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-01  9:10 [PATCH RESEND 00/28] ARM: at91: add sama5d2 first stage support Ahmad Fatoum
2020-07-01  9:10 ` [PATCH 01/28] ARM: at91: remove <mach/hardware.h> include from assembly code Ahmad Fatoum
2020-07-01  9:10 ` [PATCH 02/28] ARM: at91: sama5d2: cast peripheral base addresses to __iomem pointers Ahmad Fatoum
2020-07-01  9:10 ` [PATCH 03/28] ARM: at91: import at91bootstrap's at91_ddrsdrc.h Ahmad Fatoum
2020-07-01  9:10 ` [PATCH 04/28] ARM: at91: migrate at91sam9_ddrsdr.h to use " Ahmad Fatoum
2020-07-01  9:10 ` [PATCH 05/28] ARM: at91: replace at91sam9_ddrsdr.h with " Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 06/28] ARM: at91: import early_udelay from at91bootstrap Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 07/28] ARM: at91: import low level DDRAMC initialization code " Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 08/28] ARM: at91: watchdog: implement at91_wdt_disable Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 09/28] watchdog: add support for at91sam9/sama5 watchdog Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 10/28] ARM: at91: implement sama5d2 lowlevel init Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 11/28] ARM: at91: sama5d2: add sama5d2 matrix configuration Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 12/28] ARM: at91: add sama5d2 cache init Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 13/28] ARM: at91: add necessary Advanced Interrupt Controller configuration Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 14/28] ARM: at91: extend low level PMC driver for generic clk support Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 15/28] pbl: add block I/O API Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 16/28] fs: fat: extend for in-PBL support Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 17/28] mci: sdhci: atmel: extend driver for PBL usage Ahmad Fatoum
2020-07-05 18:52   ` Sascha Hauer
2020-07-05 22:32     ` Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 18/28] ARM: at91: add code for sama5 boot source detection Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 19/28] ARM: at91: add helpers for chain-loading barebox from SD-card Ahmad Fatoum
2020-07-05 18:42   ` Sascha Hauer
2020-07-05 22:35     ` Ahmad Fatoum
2020-07-06  6:26       ` Ahmad Fatoum [this message]
2020-07-09 14:19       ` Sascha Hauer
2020-07-09 15:01         ` [PATCH v2] fixup! " Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 20/28] ARM: at91: sama5d2: reuse stack set-up by first stage Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 21/28] ARM: at91: debug_ll: remove duplicated IS_ENABLED(CONFIG_DEBUG_LL) condition Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 22/28] ARM: at91: sama5d2: reduce UART setup boilerplate with new helpers Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 23/28] ARM: at91: sama5d27-som1: add additional first stage entry point Ahmad Fatoum
2020-07-05 18:46   ` Sascha Hauer
2020-07-06  6:22   ` [PATCH] fixup! " Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 24/28] ARM: at91: sama5d2: read back memory size from DDRAM controller Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 25/28] ARM: at91: sama5d2: populate $bootsource and $bootsource_instance Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 26/28] ARM: at91: sama5d27-som1-ek: add barebox_update and multi environment support Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 27/28] ARM: at91: sama5d27-giantboard: add additional first stage entry point Ahmad Fatoum
2020-07-06  6:22   ` [PATCH] fixup! " Ahmad Fatoum
2020-07-01  9:11 ` [PATCH 28/28] ARM: at91: sama5d27-giantboard: add default environment/bbu Ahmad Fatoum
2020-07-11  5:13 ` [PATCH RESEND 00/28] ARM: at91: add sama5d2 first stage support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200706062602.10602-1-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox