[PATCH] ARM: AT91: Add skov-arm9cpu board support

* [PATCH] ARM: AT91: Add skov-arm9cpu board support
@ 2021-04-14 12:21 Sascha Hauer
  2021-04-14 12:45 ` Ahmad Fatoum
  2021-06-19 21:04 ` Sam Ravnborg
  0 siblings, 2 replies; 4+ messages in thread
From: Sascha Hauer @ 2021-04-14 12:21 UTC (permalink / raw)
  To: Barebox List; +Cc: Sam Ravnborg

From: Sam Ravnborg <sam@ravnborg.org>

This adds support for an older SKOV board, the arm9cpu.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boards/Makefile                |   1 +
 arch/arm/boards/skov-arm9cpu/Makefile   |   2 +
 arch/arm/boards/skov-arm9cpu/board.c    |  84 +++++
 arch/arm/boards/skov-arm9cpu/lowlevel.c | 127 +++++++
 arch/arm/configs/at91_multi_defconfig   |   1 +
 arch/arm/dts/Makefile                   |   1 +
 arch/arm/dts/at91-skov-arm9cpu.dts      | 453 ++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig              |  11 +
 images/Makefile.at91                    |   5 +
 9 files changed, 685 insertions(+)
 create mode 100644 arch/arm/boards/skov-arm9cpu/Makefile
 create mode 100644 arch/arm/boards/skov-arm9cpu/board.c
 create mode 100644 arch/arm/boards/skov-arm9cpu/lowlevel.c
 create mode 100644 arch/arm/dts/at91-skov-arm9cpu.dts

diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 9ccb75e27b..dc55d7852c 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -178,3 +178,4 @@ obj-$(CONFIG_MACH_WAGO_PFC_AM35XX)		+= wago-pfc-am35xx/
 obj-$(CONFIG_MACH_LS1046ARDB)			+= ls1046ardb/
 obj-$(CONFIG_MACH_TQMLS1046A)			+= tqmls1046a/
 obj-$(CONFIG_MACH_MNT_REFORM)			+= mnt-reform/
+obj-$(CONFIG_MACH_SKOV_ARM9CPU)			+= skov-arm9cpu/
diff --git a/arch/arm/boards/skov-arm9cpu/Makefile b/arch/arm/boards/skov-arm9cpu/Makefile
new file mode 100644
index 0000000000..01c7a259e9
--- /dev/null
+++ b/arch/arm/boards/skov-arm9cpu/Makefile
@@ -0,0 +1,2 @@
+obj-y += board.o
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/skov-arm9cpu/board.c b/arch/arm/boards/skov-arm9cpu/board.c
new file mode 100644
index 0000000000..8d5eadbb9a
--- /dev/null
+++ b/arch/arm/boards/skov-arm9cpu/board.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0+
+// SPDX-FileCopyrightText: 2017 Sam Ravnborg <sam@ravnborg.org>
+
+#include <common.h>
+#include <globalvar.h>
+#include <magicvar.h>
+#include <envfs.h>
+#include <init.h>
+#include <gpio.h>
+
+#include <linux/sizes.h>
+
+#include <mach/at91sam9263_matrix.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
+#include <mach/iomux.h>
+
+static struct sam9_smc_config ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+				  AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 2,
+};
+
+BAREBOX_MAGICVAR(board.mem, "The detected memory size in MiB");
+
+static int mem;
+
+/*
+ * Initialize of SMC must come after we
+ * probe the at91sam9_smc_driver.
+ * But is required before we start the other drives.
+ * Use device_initcall() to maintain this order.
+ */
+static int skov_arm9_probe(struct device_d *dev)
+{
+	unsigned long csa;
+
+	add_generic_device("at91sam9-smc", 0, NULL, AT91SAM9263_BASE_SMC0, 0x200,
+			   IORESOURCE_MEM, NULL);
+	add_generic_device("at91sam9-smc", 1, NULL, AT91SAM9263_BASE_SMC1, 0x200,
+			   IORESOURCE_MEM, NULL);
+
+	csa = readl(AT91SAM9263_BASE_MATRIX + AT91SAM9263_MATRIX_EBI0CSA);
+	csa |= AT91SAM9263_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA;
+	writel(csa, AT91SAM9263_BASE_MATRIX + AT91SAM9263_MATRIX_EBI0CSA);
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(0, 3, &ek_nand_smc_config);
+
+	mem = at91_get_sdram_size(IOMEM(AT91SAM9263_BASE_SDRAMC0));
+	mem = mem / SZ_1M;
+	globalvar_add_simple_int("board.mem", &mem, "%u");
+
+	return 0;
+}
+
+static __maybe_unused struct of_device_id skov_arm9_ids[] = {
+	{
+		.compatible = "skov,arm9-cpu",
+	}, {
+		/* sentinel */
+	}
+};
+
+static struct driver_d skov_arm9_driver = {
+	.name = "skov-arm9",
+	.probe = skov_arm9_probe,
+	.of_compatible = DRV_OF_COMPAT(skov_arm9_ids),
+};
+device_platform_driver(skov_arm9_driver);
diff --git a/arch/arm/boards/skov-arm9cpu/lowlevel.c b/arch/arm/boards/skov-arm9cpu/lowlevel.c
new file mode 100644
index 0000000000..34f4501927
--- /dev/null
+++ b/arch/arm/boards/skov-arm9cpu/lowlevel.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+// PDX-FileCopyrightText: 2018 Sam Ravnborg <sam@ravnborg.org>
+
+#include <linux/sizes.h>
+
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam926x_board_init.h>
+#include <mach/at91sam9263_matrix.h>
+
+#define MASTER_PLL_MUL		171
+#define MASTER_PLL_DIV		14
+
+static void __bare_init skovarm9cpu_board_config(struct at91sam926x_board_cfg *cfg)
+{
+	/* Disable Watchdog */
+	cfg->wdt_mr =
+		AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |
+		AT91_WDT_WDV |
+		AT91_WDT_WDDIS |
+		AT91_WDT_WDD;
+
+	/* define PDC[31:16] as DATA[31:16] */
+	cfg->ebi_pio_pdr = 0xFFFF0000;
+	/* no pull-up for D[31:16] */
+	cfg->ebi_pio_ppudr = 0xFFFF0000;
+	/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
+	cfg->ebi_csa =
+		AT91SAM9263_MATRIX_EBI0_DBPUC | AT91SAM9263_MATRIX_EBI0_VDDIOMSEL_3_3V |
+		AT91SAM9263_MATRIX_EBI0_CS1A_SDRAMC;
+
+	cfg->smc_cs = 0;
+	cfg->smc_mode =
+		AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		AT91_SMC_DBW_16 |
+		AT91_SMC_TDFMODE |
+		AT91_SMC_TDF_(6);
+	cfg->smc_cycle =
+		AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22);
+	cfg->smc_pulse =
+		AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |
+		AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11);
+	cfg->smc_setup =
+		AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |
+		AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10);
+
+	cfg->pmc_mor =
+		AT91_PMC_MOSCEN |
+		(255 << 8);		/* Main Oscillator Start-up Time */
+	cfg->pmc_pllar =
+		AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */
+		AT91_PMC_OUT |
+		AT91_PMC_PLLCOUNT |	/* PLL Counter */
+		(2 << 28) |		/* PLL Clock Frequency Range */
+		((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV);
+	/* PCK/2 = MCK Master Clock from PLLA */
+	cfg->pmc_mckr1 =
+		AT91_PMC_CSS_SLOW |
+		AT91_PMC_PRES_1 |
+		AT91SAM9_PMC_MDIV_2 |
+		AT91_PMC_PDIV_1;
+	/* PCK/2 = MCK Master Clock from PLLA */
+	cfg->pmc_mckr2 =
+		AT91_PMC_CSS_PLLA |
+		AT91_PMC_PRES_1 |
+		AT91SAM9_PMC_MDIV_2 |
+		AT91_PMC_PDIV_1;
+
+	/* SDRAM */
+	/* SDRAMC_TR - Refresh Timer register */
+	cfg->sdrc_tr1 = 0x13C;
+	/* SDRAMC_CR - Configuration register*/
+	cfg->sdrc_cr =
+		AT91_SDRAMC_NC_10 |	/* Assume 128MiB */
+		AT91_SDRAMC_NR_13 |
+		AT91_SDRAMC_NB_4 |
+		AT91_SDRAMC_CAS_3 |
+		AT91_SDRAMC_DBW_32 |
+		(1 <<  8) |		/* Write Recovery Delay */
+		(7 << 12) |		/* Row Cycle Delay */
+		(2 << 16) |		/* Row Precharge Delay */
+		(2 << 20) |		/* Row to Column Delay */
+		(5 << 24) |		/* Active to Precharge Delay */
+		(1 << 28);		/* Exit Self Refresh to Active Delay */
+
+	/* Memory Device Register -> SDRAM */
+	cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM;
+	/* SDRAM_TR */
+	cfg->sdrc_tr2 = 1200;
+
+	/* user reset enable */
+	cfg->rstc_rmr =
+		AT91_RSTC_KEY |
+		AT91_RSTC_PROCRST |
+		AT91_RSTC_RSTTYP_WAKEUP |
+		AT91_RSTC_RSTTYP_WATCHDOG;
+}
+
+static void __bare_init skov_arm9cpu_init(void *fdt)
+{
+	struct at91sam926x_board_cfg cfg;
+
+	cfg.pio = IOMEM(AT91SAM9263_BASE_PIOD);
+	cfg.sdramc = IOMEM(AT91SAM9263_BASE_SDRAMC0);
+	cfg.ebi_pio_is_peripha = true;
+	cfg.matrix_csa = IOMEM(AT91SAM9263_BASE_MATRIX + AT91SAM9263_MATRIX_EBI0CSA);
+
+	skovarm9cpu_board_config(&cfg);
+	at91sam9263_board_init(&cfg);
+
+	barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(cfg.sdramc),
+			  fdt);
+}
+
+extern char __dtb_at91_skov_arm9cpu_start[];
+
+ENTRY_FUNCTION(start_skov_arm9cpu, r0, r1, r2)
+{
+	void *fdt;
+
+	arm_cpu_lowlevel_init();
+
+	arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16);
+	fdt = __dtb_at91_skov_arm9cpu_start + get_runtime_offset();
+
+	skov_arm9cpu_init(fdt);
+}
diff --git a/arch/arm/configs/at91_multi_defconfig b/arch/arm/configs/at91_multi_defconfig
index e6a554e87f..f0a4812f0c 100644
--- a/arch/arm/configs/at91_multi_defconfig
+++ b/arch/arm/configs/at91_multi_defconfig
@@ -1,4 +1,5 @@
 CONFIG_AT91_MULTI_BOARDS=y
+CONFIG_MACH_SKOV_ARM9CPU=y
 CONFIG_MACH_AT91SAM9263EK=y
 CONFIG_MACH_AT91SAM9X5EK=y
 CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d5f61768a5..9ce385d332 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -110,6 +110,7 @@ lwl-$(CONFIG_MACH_SOLIDRUN_CUBOX) += dove-cubox-bb.dtb.o
 lwl-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += imx6dl-hummingboard.dtb.o imx6q-hummingboard.dtb.o \
 				imx6dl-hummingboard2.dtb.o imx6q-hummingboard2.dtb.o \
 				imx6q-h100.dtb.o
+lwl-$(CONFIG_MACH_SKOV_ARM9CPU) += at91-skov-arm9cpu.dtb.o
 lwl-$(CONFIG_MACH_SEEED_ODYSSEY) += stm32mp157c-odyssey.dtb.o
 lwl-$(CONFIG_MACH_STM32MP15XX_DKX) += stm32mp157c-dk2.dtb.o stm32mp157a-dk1.dtb.o
 lwl-$(CONFIG_MACH_LXA_MC1) += stm32mp157c-lxa-mc1.dtb.o
diff --git a/arch/arm/dts/at91-skov-arm9cpu.dts b/arch/arm/dts/at91-skov-arm9cpu.dts
new file mode 100644
index 0000000000..3f1df618d7
--- /dev/null
+++ b/arch/arm/dts/at91-skov-arm9cpu.dts
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: GPL-2.0
+// SPDX-FileCopyrightText: 2018 Sam Ravnborg <sam@ravnborg.org>
+
+/*
+ * Device Tree file for SKOV ARM9 CPU board with 128 MB RAM and
+ * Logic Technology Display
+ */
+
+/dts-v1/;
+
+#include "arm/at91sam9263.dtsi"
+
+/ {
+	model = "SKOV ARM9 CPU";
+	compatible = "skov,arm9-cpu", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+
+		environment {
+			compatible = "barebox,environment";
+			device-path = &environment_nor;
+		};
+	};
+
+	ahb {
+		apb {
+			pinctrl: pinctrl@fffff200 {
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		flash: nor_flash@10000000 {
+			compatible = "cfi-flash";
+			reg = <0x10000000 0x4000000>;
+			linux,mtd-name = "physmap-flash.0";
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				barebox@0 {
+					label = "bootloader";
+					reg = <0x00000 0x80000>;
+				};
+
+				environment_nor: env@80000 {
+					label = "environment";
+					reg = <0x80000 0x20000>;
+				};
+
+				linux@a0000 {
+					label = "linux";
+					reg = <0xa0000 0x2a0000>;
+				};
+
+				rootfs@340000  {
+					label = "rootfs";
+					reg = <0x340000 0x3cc0000>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		D0 {
+			label = "D0";
+			gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		D1 {
+			label = "D1";
+			gpios = <&pioD 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		D2 {
+			label = "D2";
+			gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led_0 {
+			label = "led_0";
+			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led_1 {
+			label = "led_1";
+			gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
+		};
+
+		led_2 {
+			label = "led_2";
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led_3 {
+			label = "led_3";
+			gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
+		};
+
+		led_4 {
+			label = "led_4";
+			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+		};
+
+		led_5 {
+			label = "led_5";
+			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+		};
+
+		led_6 {
+			label = "led_6";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led_7 {
+			label = "led_7";
+			gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "24c512";
+			reg = <0x50>;
+			pagesize = <128>;
+		};
+	};
+
+	rotary-encoder {
+		compatible = "rotary-encoder";
+		gpios = <&pioB 19 GPIO_ACTIVE_LOW>, <&pioB 20 GPIO_ACTIVE_LOW>;
+		linux,axis = <0>; /* REL_X */
+		rotary-encoder,steps-per-period = <4>;
+		rotary-encoder,relative-axis;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rotary_button {
+			label = "rotary_button";
+			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
+			debounce-interval = <10>;
+			linux,code = <28>; /* enter */
+		};
+	};
+
+	matrix-keypad-6x5 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <10>;
+		col-scan-delay-us = <10>;
+
+		row-gpios = <&pioB 25 GPIO_ACTIVE_HIGH    /* 1 */
+			     &pioB 21 GPIO_ACTIVE_HIGH    /* 2 */
+			     &pioB 16 GPIO_ACTIVE_HIGH    /* 3 */
+			     &pioB 24 GPIO_ACTIVE_HIGH    /* 4 */
+			     &pioB 12 GPIO_ACTIVE_HIGH>;  /* 5 */
+
+		col-gpios = <&pioB 13 GPIO_ACTIVE_HIGH    /* 1 */
+			     &pioB 17 GPIO_ACTIVE_HIGH    /* 2 */
+			     &pioA 25 GPIO_ACTIVE_HIGH    /* 3 */
+			     &pioA 21 GPIO_ACTIVE_HIGH    /* 4 */
+			     &pioA 19 GPIO_ACTIVE_HIGH    /* 5 */
+			     &pioA 18 GPIO_ACTIVE_HIGH>;  /* 6 */
+
+
+		linux,keymap = <
+			0x00000011 /* col0 row0 KEY_W */
+			0x01000021 /* col0 row1 KEY_F */
+			0x02000031 /* col0 row2 KEY_N */
+			0x03000041 /* col0 row3 KEY_F7 */
+			0x04000051 /* col0 row4 KEY_KP3 */
+			0x00010012 /* col1 row0 KEY_E */
+			0x01010022 /* col1 row1 KEY_G */
+			0x02010032 /* col1 row2 KEY_M */
+			0x03010042 /* col1 row3 KEY_F8 */
+			0x04010052 /* col1 row4 KEY_KP0 */
+			0x00020013 /* col2 row0 KEY_R */
+			0x01020023 /* col2 row1 KEY_H */
+			0x02020033 /* col2 row2 KEY_COMMA */
+			0x03020043 /* col2 row3 KEY_F9 */
+			0x04020053 /* col2 row4 KEY_F9 */
+			0x00030014 /* col3 row0 KEY_T */
+			0x01030024 /* col3 row1 KEY_J */
+			0x02030034 /* col3 row2 KEY_DOT */
+			0x03030044 /* col3 row3 KEY_NUMLOCK */
+			0x04030054 /* col3 row4 */
+			0x00040015 /* col4 row0 KEY_Y */
+			0x01040025 /* col4 row1 KEY_K */
+			0x02040035 /* col4 row2 KEY_SLASH */
+			0x03040045 /* col4 row3 KEY_NUMLOCK */
+			0x04040055 /* col4 row4 KEY_ZENKAKUHANKAKU */
+			0x00050016 /* col5 row0 KEY_U */
+			0x01050026 /* col5 row1 KEY_L */
+			0x02050036 /* col5 row2 KEY_RIGH_SHIFT */
+			0x03050046 /* col5 row3 KEY_SCROLLLOCK */
+			0x04050056 /* col5 row4 KEY_102ND */
+		>;
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&fb0 {
+	status = "okay";
+	display = <&display0>;
+	display0: display0 {
+		bits-per-pixel = <16>;
+		atmel,lcdcon-backlight;
+		atmel,dmacon = <0x1>;
+		atmel,lcdcon2 = <0x80008002>;
+		atmel,guard-time = <1>;
+		atmel,lcd-wiring-mode = "BRG";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&pinctrl_board_fb
+			&pinctrl_disp_type
+			&pinctrl_logic_type
+		>;
+
+		atmel,power-control-gpio = <&pioA 30 GPIO_ACTIVE_HIGH>;
+
+		display-timings {
+			native-mode = <&l2rt>;
+
+			l2rt: l2rt {
+				/* LTTD800480070-L2RT @ 55 */
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				/* Atmel calculation
+				 * Horizontal =
+				 * Hsync + left margin + picture + right_margin + 1
+				 * (3 + 85 + 800 + 0 + 1 = 889)
+				 */
+				hback-porch = <85>;
+				hfront-porch = <1>;
+				hsync-len = <3>;
+				/* Vertical =
+				 * upper margin + picture + lower_margin
+				 * (32 + 480 + 1 = 513) (25MHz / ( 889 * 513 ) = 54,8Hz
+				 */
+				vback-porch = <32>;
+				vfront-porch = <1>;
+				vsync-len = <3>;
+				pixelclk-active = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+			};
+
+			l6whrt: l6whrt {
+				clock-frequency = <33000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <43>;
+				hfront-porch = <154>;
+				vback-porch = <20>;
+				vfront-porch = <47>;
+				hsync-len = <3>;
+				vsync-len = <3>;
+				pixelclk-active = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+			};
+
+			seiko: seiko {
+				/* 70WVW2AZ0 @ 55 */
+				clock-frequency = <33000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <0>;
+				hfront-porch = <256>;
+				vback-porch = <45>;
+				vfront-porch = <0>;
+				hsync-len = <0>;
+				vsync-len = <0>;
+				pixelclk-active = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	status = "okay";
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ethphy0: ethernet-phy@1 {
+		reg = <3>;
+		reset-gpios = <&pioE 17 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <1000>;
+		reset-deassert-us = <100>;
+	};
+};
+
+&main_xtal {
+	clock-frequency = <16000000>;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-0 = <
+		&pinctrl_board_mmc1
+		&pinctrl_mmc1_clk
+		&pinctrl_mmc1_slot0_cmd_dat0
+		&pinctrl_mmc1_slot0_dat1_3>;
+	cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	mmc1 {
+		pinctrl_board_mmc1: mmc1-board {
+			atmel,pins =
+				<AT91_PIOE 18 AT91_PERIPH_GPIO
+				 AT91_PINCTRL_PULL_UP_DEGLITCH 	/* PE18 gpio CD pin pull up and deglitch */
+				 AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PE19 gpio WP pin pull up */
+		};
+	};
+
+	display_type_inputs {
+		pinctrl_disp_type: disp_type-0 {
+			/* Pull-up (HIGH) if Seiko display, otherwise Logic display */
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+		pinctrl_logic_type: logic_type-0 {
+			/* Pull-down (LOW) if l6whrt display, otherwise l2rt display */
+			atmel,pins =
+				<AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	fb {
+		pinctrl_board_fb: fb-0 {
+			atmel,pins =
+			       <AT91_PIOC 0  AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDVSYNC */
+				AT91_PIOC 1  AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDHSYNC */
+				AT91_PIOC 2  AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDDOTCK */
+				AT91_PIOC 3  AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDDEN */
+				AT91_PIOB 9  AT91_PERIPH_B AT91_PINCTRL_NONE    /* LCDCC */
+				AT91_PIOC 6  AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD2 */
+				AT91_PIOC 7  AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD3 */
+				AT91_PIOC 8  AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD4 */
+				AT91_PIOC 9  AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD5 */
+				AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD6 */
+				AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD7 */
+				AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD10 */
+				AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD11 */
+				AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD12 */
+				AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE    /* LCDD13 */
+				AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD14 */
+				AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD15 */
+				AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD18 */
+				AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD19 */
+				AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD20 */
+				AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE    /* LCDD21 */
+				AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD22 */
+				AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* LCDD23 */
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0: pwm0_pwm1 {
+			atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	status = "okay";
+	cs-gpios = <&pioA 3 0>, <&pioB 11 0>;
+
+	mcp3002@0 {
+		compatible = "microchip,mcp3002";
+		reg = <0>;
+		spi-max-frequency = <750000>;
+	};
+
+	tsc2046@1 {
+		compatible = "ti,tsc2046";
+		reg = <1>;
+		interrupts-extended = <&pioA 15 IRQ_TYPE_EDGE_BOTH>;
+		spi-max-frequency = <500000>;
+		pendown-gpio = <&pioA 15 GPIO_ACTIVE_LOW>;
+
+		ti,x-min = /bits/ 16 <800>;
+		ti,x-max = /bits/ 16 <3830>;
+		ti,y-min = /bits/ 16 <500>;
+		ti,y-max = /bits/ 16 <3830>;
+		ti,vref-delay-usecs = /bits/ 16 <300>;
+		ti,x-plate-ohms = /bits/ 16 <642>;
+		ti,y-plate-ohms = /bits/ 16 <295>;
+		ti,pressure-max = /bits/ 16 <1500>;
+		ti,debounce-rep = /bits/ 16 <8>;
+		ti,debounce-tol = /bits/ 16 <(~0)>;
+		ti,debounce-max = /bits/ 16 <100>;
+
+		wakeup-source;
+	};
+};
+
+&usart0 {
+	status = "okay";
+	pinctrl-0 = <
+		&pinctrl_usart0
+		&pinctrl_usart0_rts
+		&pinctrl_usart0_cts>;
+};
+
+&usb0 {
+	status = "okay";
+	num-ports = <2>;
+};
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 52eefc7361..810c00d495 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -577,6 +577,17 @@ config AT91_MULTI_BOARDS
 
 if AT91_MULTI_BOARDS
 
+config MACH_SKOV_ARM9CPU
+	bool "SKOV ARM9 CPU"
+	select SOC_AT91SAM9263
+	select OFDEVICE
+	select COMMON_CLK_OF_PROVIDER
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_BOOTSTRAP
+	select AT91SAM926X_BOARD_INIT
+	help
+	  Say y here if you are using SKOV's ARM9 CPU board
+
 config MACH_AT91SAM9263EK
 	bool "Atmel AT91SAM9263-EK"
 	select SOC_AT91SAM9263
diff --git a/images/Makefile.at91 b/images/Makefile.at91
index 00fa4cab27..7ab92edf14 100644
--- a/images/Makefile.at91
+++ b/images/Makefile.at91
@@ -31,3 +31,8 @@ pblb-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += start_sama5d27_giantboard_xload_mmc
 FILE_barebox-groboards-sama5d27-giantboard-xload-mmc.img = start_sama5d27_giantboard_xload_mmc.pblb
 MAX_PBL_IMAGE_SIZE_start_sama5d27_giantboard_xload_mmc = 0xffff
 image-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += barebox-groboards-sama5d27-giantboard-xload-mmc.img
+
+pblb-$(CONFIG_MACH_SKOV_ARM9CPU) += start_skov_arm9cpu
+FILE_barebox-skov-arm9cpu.img = start_skov_arm9cpu.pblb
+MAX_PBL_MEMORY_SIZE_start_skov_arm9cpu = 0x12000
+image-$(CONFIG_MACH_SKOV_ARM9CPU) += barebox-skov-arm9cpu.img
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 4+ messages in thread