mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH v5 00/17] barebox deep probe support
@ 2021-05-06  9:28 Sascha Hauer
  2021-05-06  9:28 ` [PATCH 01/17] imx53: remove unused imx53_add_nand Sascha Hauer
                   ` (16 more replies)
  0 siblings, 17 replies; 24+ messages in thread
From: Sascha Hauer @ 2021-05-06  9:28 UTC (permalink / raw)
  To: Barebox List

Another round to address the last review feedback

Changes since v4:
  - Pass of_device_id array to BAREBOX_DEEP_PROBE_ENABLE()
  - convert dev_warn to dev_err

Changes since v3:
  - Add deep-probe support for pinctrl
  - Port over Phytec Physom to deep-probe
  - Make sure console is probed ealier at postconsole_initcall time
  - Let of_devices_ensure_probed_by_dev_id() probe all matching devices, not
    only the first one
  - add GPIO support to the base deep probe patch

Lucas Stach (1):
  of: base: move memory init from DT to initcall

Marco Felsch (9):
  imx53: remove unused imx53_add_nand
  of: platform: remove check of already added devices
  of: platform: Keep track of populated platform devices
  of: base: move clock init from of_probe() to barebox_register_of()
  initcall: add of_populate_initcall
  common: add initial barebox deep-probe support
  ARM: i.MX: esdctl: add deep-probe support
  ARM: stm32mp: ddrctrl: add deep-probe support
  ARM: boards: mx6-sabrelite: add deep-probe support

Sascha Hauer (7):
  of: Set of_chosen and of_model earlier
  of: implement of_get_stdoutpath()
  pinctrl: Find controller node first
  common: Explicitly probe consoles earlier with deep probe
  pinctrl: Add deep probe support
  ARM: i.MX Phytec physom: convert to board driver
  ARM: i.MX Phytec physom: Add deep-probe support

 .../boards/freescale-mx6-sabrelite/board.c    |  58 +++--
 arch/arm/boards/phytec-som-imx6/board.c       | 159 +++++++++---
 arch/arm/mach-imx/esdctl.c                    |  12 +-
 .../arm/mach-imx/include/mach/devices-imx53.h |  27 --
 arch/arm/mach-stm32mp/ddrctrl.c               |  12 +-
 common/Makefile                               |   1 +
 common/deep-probe.c                           |  39 +++
 drivers/base/driver.c                         |  11 +-
 drivers/clk/clk.c                             |   5 +
 drivers/i2c/i2c.c                             |   8 +
 drivers/of/base.c                             |  61 +++--
 drivers/of/of_gpio.c                          |   4 +
 drivers/of/platform.c                         | 230 +++++++++++++++---
 drivers/pinctrl/pinctrl.c                     |  16 +-
 drivers/regulator/core.c                      |   6 +
 drivers/reset/core.c                          |   4 +
 drivers/spi/spi.c                             |   2 +
 include/asm-generic/barebox.lds.h             |  11 +-
 include/deep-probe.h                          |  26 ++
 include/init.h                                |  10 +-
 include/of.h                                  |  33 +++
 21 files changed, 587 insertions(+), 148 deletions(-)
 create mode 100644 common/deep-probe.c
 create mode 100644 include/deep-probe.h

-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 24+ messages in thread
* [PATCH v4 00/17] barebox deep probe support
@ 2021-04-16  9:49 Sascha Hauer
  2021-04-16  9:49 ` [PATCH 17/17] ARM: i.MX Phytec physom: Add deep-probe support Sascha Hauer
  0 siblings, 1 reply; 24+ messages in thread
From: Sascha Hauer @ 2021-04-16  9:49 UTC (permalink / raw)
  To: Barebox List

Hi All,

This is the fourth round of patches for barebox deep-probe support.
I picked up the series from Marco, it has the things fixed I mentioned
during the last review and some other improvements:

Changes since v3:
  - Add deep-probe support for pinctrl
  - Port over Phytec Physom to deep-probe
  - Make sure console is probed ealier at postconsole_initcall time
  - Let of_devices_ensure_probed_by_dev_id() probe all matching devices, not
    only the first one
  - add GPIO support to the base deep probe patch

Lucas Stach (1):
  of: base: move memory init from DT to initcall

Marco Felsch (9):
  imx53: remove unused imx53_add_nand
  of: platform: remove check of already added devices
  of: platform: Keep track of populated platform devices
  of: base: move clock init from of_probe() to barebox_register_of()
  initcall: add of_populate_initcall
  common: add initial barebox deep-probe support
  ARM: i.MX: esdctl: add deep-probe support
  ARM: stm32mp: ddrctrl: add deep-probe support
  ARM: boards: mx6-sabrelite: add deep-probe support

Sascha Hauer (7):
  of: Set of_chosen and of_model earlier
  of: implement of_get_stdoutpath()
  pinctrl: Find controller node first
  common: Explicitly probe consoles earlier with deep probe
  pinctrl: Add deep probe support
  ARM: i.MX Phytec physom: convert to board driver
  ARM: i.MX Phytec physom: Add deep-probe support

 .../boards/freescale-mx6-sabrelite/board.c    |  24 +-
 arch/arm/boards/phytec-som-imx6/board.c       | 169 ++++++++++---
 arch/arm/mach-imx/esdctl.c                    |  12 +-
 .../arm/mach-imx/include/mach/devices-imx53.h |  27 --
 arch/arm/mach-stm32mp/ddrctrl.c               |  12 +-
 common/Makefile                               |   1 +
 common/deep-probe.c                           |  34 +++
 drivers/base/driver.c                         |  11 +-
 drivers/clk/clk.c                             |   5 +
 drivers/i2c/i2c.c                             |   8 +
 drivers/of/base.c                             |  61 +++--
 drivers/of/of_gpio.c                          |   4 +
 drivers/of/platform.c                         | 230 +++++++++++++++---
 drivers/pinctrl/pinctrl.c                     |  16 +-
 drivers/regulator/core.c                      |   6 +
 drivers/reset/core.c                          |   4 +
 drivers/spi/spi.c                             |   2 +
 include/asm-generic/barebox.lds.h             |  11 +-
 include/deep-probe.h                          |  26 ++
 include/init.h                                |  10 +-
 include/of.h                                  |  33 +++
 21 files changed, 575 insertions(+), 131 deletions(-)
 create mode 100644 common/deep-probe.c
 create mode 100644 include/deep-probe.h

-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 24+ messages in thread

end of thread, other threads:[~2021-05-06  9:32 UTC | newest]

Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-06  9:28 [PATCH v5 00/17] barebox deep probe support Sascha Hauer
2021-05-06  9:28 ` [PATCH 01/17] imx53: remove unused imx53_add_nand Sascha Hauer
2021-05-06  9:28 ` [PATCH 02/17] of: platform: remove check of already added devices Sascha Hauer
2021-05-06  9:28 ` [PATCH 03/17] of: platform: Keep track of populated platform devices Sascha Hauer
2021-05-06  9:28 ` [PATCH 04/17] of: base: move memory init from DT to initcall Sascha Hauer
2021-05-06  9:28 ` [PATCH 05/17] of: base: move clock init from of_probe() to barebox_register_of() Sascha Hauer
2021-05-06  9:28 ` [PATCH 06/17] of: Set of_chosen and of_model earlier Sascha Hauer
2021-05-06  9:28 ` [PATCH 07/17] of: implement of_get_stdoutpath() Sascha Hauer
2021-05-06  9:28 ` [PATCH 08/17] initcall: add of_populate_initcall Sascha Hauer
2021-05-06  9:28 ` [PATCH 09/17] common: add initial barebox deep-probe support Sascha Hauer
2021-05-06  9:28 ` [PATCH 10/17] pinctrl: Find controller node first Sascha Hauer
2021-05-06  9:28 ` [PATCH 11/17] common: Explicitly probe consoles earlier with deep probe Sascha Hauer
2021-05-06  9:28 ` [PATCH 12/17] pinctrl: Add deep probe support Sascha Hauer
2021-05-06  9:28 ` [PATCH 13/17] ARM: i.MX: esdctl: add deep-probe support Sascha Hauer
2021-05-06  9:28 ` [PATCH 14/17] ARM: stm32mp: ddrctrl: " Sascha Hauer
2021-05-06  9:28 ` [PATCH 15/17] ARM: boards: mx6-sabrelite: " Sascha Hauer
2021-05-06  9:29 ` [PATCH 16/17] ARM: i.MX Phytec physom: convert to board driver Sascha Hauer
2021-05-06  9:29 ` [PATCH 17/17] ARM: i.MX Phytec physom: Add deep-probe support Sascha Hauer
  -- strict thread matches above, loose matches on Subject: below --
2021-04-16  9:49 [PATCH v4 00/17] barebox deep probe support Sascha Hauer
2021-04-16  9:49 ` [PATCH 17/17] ARM: i.MX Phytec physom: Add deep-probe support Sascha Hauer
2021-04-19  7:12   ` Ahmad Fatoum
2021-04-26  9:20     ` Marco Felsch
2021-04-26  9:26       ` Marco Felsch
2021-04-26  9:36       ` Ahmad Fatoum
2021-04-26 10:03         ` Marco Felsch

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox