From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 02/12] mci: sdhci: Add and use SDHCI_CAPABILITIES_1 defines
Date: Mon, 7 Jun 2021 12:44:01 +0200 [thread overview]
Message-ID: <20210607104411.23071-3-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20210607104411.23071-1-s.hauer@pengutronix.de>
Linux has defines for the SDHCI_CAPABILITIES_1 register at offset 0x44.
Add these and convert the only user so far to use the defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/mci/atmel-sdhci-common.c | 6 ++----
drivers/mci/sdhci.h | 15 ++++++++++++++-
2 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/mci/atmel-sdhci-common.c b/drivers/mci/atmel-sdhci-common.c
index 92013feb95..b391775b00 100644
--- a/drivers/mci/atmel-sdhci-common.c
+++ b/drivers/mci/atmel-sdhci-common.c
@@ -24,8 +24,6 @@
#include "atmel-sdhci.h"
-#define AT91_SDHCI_CA1R 0x44 /* Capabilities 1 Register */
-
#define AT91_SDHCI_MC1R 0x204
#define AT91_SDHCI_MC1_FCD BIT(7)
#define AT91_SDHCI_CALCR 0x240
@@ -237,9 +235,9 @@ static int at91_sdhci_set_clock(struct at91_sdhci *host, unsigned clock)
if (clock == 0)
return 0;
- caps = sdhci_read32(sdhci, AT91_SDHCI_CA1R);
+ caps = sdhci_read32(sdhci, SDHCI_CAPABILITIES_1);
- caps_clk_mult = (caps & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT;
+ caps_clk_mult = FIELD_GET(SDHCI_CLOCK_MUL_MASK, caps);
if (caps_clk_mult) {
for (clk_div = 1; clk_div <= 1024; clk_div++) {
diff --git a/drivers/mci/sdhci.h b/drivers/mci/sdhci.h
index 9bd9749dd6..fd63cd84de 100644
--- a/drivers/mci/sdhci.h
+++ b/drivers/mci/sdhci.h
@@ -123,7 +123,20 @@
#define SDHCI_CAN_64BIT_V4 0x08000000
#define SDHCI_CAN_64BIT 0x10000000
-#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
+#define SDHCI_CAPABILITIES_1 0x44
+#define SDHCI_SUPPORT_SDR50 0x00000001
+#define SDHCI_SUPPORT_SDR104 0x00000002
+#define SDHCI_SUPPORT_DDR50 0x00000004
+#define SDHCI_DRIVER_TYPE_A 0x00000010
+#define SDHCI_DRIVER_TYPE_C 0x00000020
+#define SDHCI_DRIVER_TYPE_D 0x00000040
+#define SDHCI_RETUNING_TIMER_COUNT_MASK GENMASK(11, 8)
+#define SDHCI_USE_SDR50_TUNING 0x00002000
+#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14)
+#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16)
+#define SDHCI_CAN_DO_ADMA3 0x08000000
+#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
+
#define SDHCI_CLOCK_MUL_SHIFT 16
#define SDHCI_SPEC_200_MAX_CLK_DIVIDER 256
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-06-07 10:51 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-07 10:43 [PATCH 00/12] SDHCI updates Sascha Hauer
2021-06-07 10:44 ` [PATCH 01/12] mci: sdhci: straighten capabilities register Sascha Hauer
2021-06-07 10:44 ` Sascha Hauer [this message]
2021-06-07 10:44 ` [PATCH 03/12] mci: sdhci: Use SDHCI_MAX_DIV_SPEC_200 define Sascha Hauer
2021-06-07 10:44 ` [PATCH 04/12] mci: sdhci: port over some common functions from Linux Sascha Hauer
2021-06-07 10:44 ` [PATCH 05/12] mci: sdhci: imx: Use sdhci_setup_host() Sascha Hauer
2021-06-07 10:44 ` [PATCH 06/12] mci: sdhci: Use Linux defines for SDHCI_HOST_CONTROL register Sascha Hauer
2022-01-26 6:32 ` Antony Pavlov
2022-01-26 9:23 ` Sascha Hauer
2022-01-26 10:13 ` Antony Pavlov
2021-06-07 10:44 ` [PATCH 07/12] mci: sdhci: arasan: Use sdhci_setup_host() Sascha Hauer
2021-06-07 10:44 ` [PATCH 08/12] mci: sdhci: arasan: Use sdhci_set_bus_width() Sascha Hauer
2021-06-07 10:44 ` [PATCH 09/12] mci: sdhci: Use Linux defines for SDHCI_CLOCK_CONTROL register Sascha Hauer
2021-06-07 10:44 ` [PATCH 10/12] mci: sdhci: arasan: Use sdhci_set_clock() Sascha Hauer
2021-06-07 10:44 ` [PATCH 11/12] mci: sdhci: Get rid of many register ops Sascha Hauer
2021-06-07 10:44 ` [PATCH 12/12] mci: Add support for Rockchip variant of the dwcmshc Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210607104411.23071-3-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox