From: Michael Tretter <m.tretter@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 4/7] ARM: zynqmp: add update handler
Date: Thu, 24 Jun 2021 12:23:39 +0200 [thread overview]
Message-ID: <20210624102342.269363-5-m.tretter@pengutronix.de> (raw)
In-Reply-To: <20210624102342.269363-1-m.tretter@pengutronix.de>
The ZynqMP boots from an SDHCI device by reading a boot.bin file from
the FAT16/32 partition, which is the first partition in the MBR.
The update handler copies a boot.bin image to this partition, which
might be board specific.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
arch/arm/mach-zynqmp/Makefile | 1 +
.../arm/mach-zynqmp/include/mach/zynqmp-bbu.h | 21 ++++++++
arch/arm/mach-zynqmp/zynqmp-bbu.c | 48 +++++++++++++++++++
3 files changed, 70 insertions(+)
create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
create mode 100644 arch/arm/mach-zynqmp/zynqmp-bbu.c
diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
index 14b8a4e46b87..e24a43c0d59f 100644
--- a/arch/arm/mach-zynqmp/Makefile
+++ b/arch/arm/mach-zynqmp/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-or-later
obj-y += firmware-zynqmp.o
obj-y += zynqmp.o
+obj-$(CONFIG_BAREBOX_UPDATE) += zynqmp-bbu.o
diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
new file mode 100644
index 000000000000..8502791ee0f7
--- /dev/null
+++ b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
+ */
+#ifndef __MACH_ZYNQMP_BBU_H
+#define __MACH_ZYNQMP_BBU_H
+
+#include <bbu.h>
+
+#ifdef CONFIG_BAREBOX_UPDATE
+int zynqmp_bbu_register_handler(const char *name, char *devicefile,
+ unsigned long flags);
+#else
+static int zynqmp_bbu_register_handler(const char *name, char *devicefile,
+ unsigned long flags)
+{
+ return 0;
+};
+#endif
+
+#endif /* __MACH_ZYNQMP_BBU_H */
diff --git a/arch/arm/mach-zynqmp/zynqmp-bbu.c b/arch/arm/mach-zynqmp/zynqmp-bbu.c
new file mode 100644
index 000000000000..d1197c01dc41
--- /dev/null
+++ b/arch/arm/mach-zynqmp/zynqmp-bbu.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
+ */
+
+#include <common.h>
+#include <libfile.h>
+#include <mach/zynqmp-bbu.h>
+
+static int zynqmp_bbu_handler(struct bbu_handler *handler,
+ struct bbu_data *data)
+{
+ int ret = 0;
+
+ ret = bbu_confirm(data);
+ if (ret)
+ return ret;
+
+ ret = copy_file(data->imagefile, data->devicefile, 1);
+ if (ret < 0) {
+ pr_err("update failed: %s", strerror(-ret));
+ return ret;
+ }
+
+ return ret;
+}
+
+int zynqmp_bbu_register_handler(const char *name, char *devicefile,
+ unsigned long flags)
+{
+ struct bbu_handler *handler;
+ int ret = 0;
+
+ if (!name || !devicefile)
+ return -EINVAL;
+
+ handler = xzalloc(sizeof(*handler));
+ handler->name = name;
+ handler->devicefile = devicefile;
+ handler->flags = flags;
+ handler->handler = zynqmp_bbu_handler;
+
+ ret = bbu_register_handler(handler);
+ if (ret)
+ free(handler);
+
+ return ret;
+}
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-06-24 10:26 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-24 10:23 [PATCH 0/7] ZynqMP: Cleanup and extend board support Michael Tretter
2021-06-24 10:23 ` [PATCH 1/7] ARM: zynqmp: set reset source Michael Tretter
2021-06-24 10:48 ` Ahmad Fatoum
2021-06-24 13:20 ` Michael Tretter
2021-06-24 13:30 ` Ahmad Fatoum
2021-06-24 10:23 ` [PATCH 2/7] clk: zynqmp: do not enable already enabled clocks Michael Tretter
2021-06-24 10:23 ` [PATCH 3/7] dts: zcu104: add Barebox environment Michael Tretter
2021-06-24 10:23 ` Michael Tretter [this message]
2021-06-24 10:52 ` [PATCH 4/7] ARM: zynqmp: add update handler Ahmad Fatoum
2021-06-24 13:24 ` Michael Tretter
2021-06-24 13:34 ` Ahmad Fatoum
2021-06-25 9:05 ` Michael Tretter
2021-06-24 10:23 ` [PATCH 5/7] ARM: zynqmp: zcu104: register " Michael Tretter
2021-06-24 10:23 ` [PATCH 6/7] ARM: zynqmp: defconfig: enable more features Michael Tretter
2021-06-24 10:23 ` [PATCH 7/7] Documentation: zynqmp: add some documentation Michael Tretter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210624102342.269363-5-m.tretter@pengutronix.de \
--to=m.tretter@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox