mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Michael Tretter <m.tretter@pengutronix.de>, barebox@lists.infradead.org
Subject: Re: [PATCH 4/7] ARM: zynqmp: add update handler
Date: Thu, 24 Jun 2021 12:52:58 +0200	[thread overview]
Message-ID: <c06d88d6-db66-0a43-a4d8-3717c329c928@pengutronix.de> (raw)
In-Reply-To: <20210624102342.269363-5-m.tretter@pengutronix.de>

Hi,

On 24.06.21 12:23, Michael Tretter wrote:
> The ZynqMP boots from an SDHCI device by reading a boot.bin file from
> the FAT16/32 partition, which is the first partition in the MBR.
> 
> The update handler copies a boot.bin image to this partition, which
> might be board specific.

Is barebox the boot.bin or is that a separate first stage bootloader?

> 
> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> ---
>  arch/arm/mach-zynqmp/Makefile                 |  1 +
>  .../arm/mach-zynqmp/include/mach/zynqmp-bbu.h | 21 ++++++++
>  arch/arm/mach-zynqmp/zynqmp-bbu.c             | 48 +++++++++++++++++++
>  3 files changed, 70 insertions(+)
>  create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
>  create mode 100644 arch/arm/mach-zynqmp/zynqmp-bbu.c
> 
> diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
> index 14b8a4e46b87..e24a43c0d59f 100644
> --- a/arch/arm/mach-zynqmp/Makefile
> +++ b/arch/arm/mach-zynqmp/Makefile
> @@ -1,3 +1,4 @@
>  # SPDX-License-Identifier: GPL-2.0-or-later
>  obj-y += firmware-zynqmp.o
>  obj-y += zynqmp.o
> +obj-$(CONFIG_BAREBOX_UPDATE) += zynqmp-bbu.o
> diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> new file mode 100644
> index 000000000000..8502791ee0f7
> --- /dev/null
> +++ b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> @@ -0,0 +1,21 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
> + */
> +#ifndef __MACH_ZYNQMP_BBU_H
> +#define __MACH_ZYNQMP_BBU_H
> +
> +#include <bbu.h>
> +
> +#ifdef CONFIG_BAREBOX_UPDATE
> +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> +				unsigned long flags);
> +#else
> +static int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> +				       unsigned long flags)
> +{
> +	return 0;
> +};
> +#endif
> +
> +#endif /* __MACH_ZYNQMP_BBU_H */
> diff --git a/arch/arm/mach-zynqmp/zynqmp-bbu.c b/arch/arm/mach-zynqmp/zynqmp-bbu.c
> new file mode 100644
> index 000000000000..d1197c01dc41
> --- /dev/null
> +++ b/arch/arm/mach-zynqmp/zynqmp-bbu.c
> @@ -0,0 +1,48 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 Michael Tretter <m.tretter@pengutronix.de>
> + */
> +
> +#include <common.h>
> +#include <libfile.h>
> +#include <mach/zynqmp-bbu.h>
> +
> +static int zynqmp_bbu_handler(struct bbu_handler *handler,
> +		struct bbu_data *data)
> +{
> +	int ret = 0;
> +
> +	ret = bbu_confirm(data);
> +	if (ret)
> +		return ret;
> +
> +	ret = copy_file(data->imagefile, data->devicefile, 1);
> +	if (ret < 0) {
> +		pr_err("update failed: %s", strerror(-ret));
> +		return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> +		unsigned long flags)
> +{
> +	struct bbu_handler *handler;
> +	int ret = 0;
> +
> +	if (!name || !devicefile)
> +		return -EINVAL;
> +
> +	handler = xzalloc(sizeof(*handler));
> +	handler->name = name;
> +	handler->devicefile = devicefile;
> +	handler->flags = flags;
> +	handler->handler = zynqmp_bbu_handler;
> +
> +	ret = bbu_register_handler(handler);
> +	if (ret)
> +		free(handler);
> +
> +	return ret;
> +}
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  reply	other threads:[~2021-06-24 10:54 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-24 10:23 [PATCH 0/7] ZynqMP: Cleanup and extend board support Michael Tretter
2021-06-24 10:23 ` [PATCH 1/7] ARM: zynqmp: set reset source Michael Tretter
2021-06-24 10:48   ` Ahmad Fatoum
2021-06-24 13:20     ` Michael Tretter
2021-06-24 13:30       ` Ahmad Fatoum
2021-06-24 10:23 ` [PATCH 2/7] clk: zynqmp: do not enable already enabled clocks Michael Tretter
2021-06-24 10:23 ` [PATCH 3/7] dts: zcu104: add Barebox environment Michael Tretter
2021-06-24 10:23 ` [PATCH 4/7] ARM: zynqmp: add update handler Michael Tretter
2021-06-24 10:52   ` Ahmad Fatoum [this message]
2021-06-24 13:24     ` Michael Tretter
2021-06-24 13:34       ` Ahmad Fatoum
2021-06-25  9:05         ` Michael Tretter
2021-06-24 10:23 ` [PATCH 5/7] ARM: zynqmp: zcu104: register " Michael Tretter
2021-06-24 10:23 ` [PATCH 6/7] ARM: zynqmp: defconfig: enable more features Michael Tretter
2021-06-24 10:23 ` [PATCH 7/7] Documentation: zynqmp: add some documentation Michael Tretter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c06d88d6-db66-0a43-a4d8-3717c329c928@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=m.tretter@pengutronix.de \
    --subject='Re: [PATCH 4/7] ARM: zynqmp: add update handler' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox