mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH] RISC-V: configs: virt: enable networking and PCI
@ 2021-11-22 20:50 Ahmad Fatoum
  2021-11-25  7:46 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Ahmad Fatoum @ 2021-11-22 20:50 UTC (permalink / raw)
  To: barebox; +Cc: Ahmad Fatoum

Recently, we have gained support for PCI and virtio networking. Enable
both in the config as well as related useful options that depends on
them.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
---
 arch/riscv/Kconfig.socs             |  1 +
 arch/riscv/configs/virt32_defconfig | 20 ++++++++++++++++----
 arch/riscv/configs/virt64_defconfig | 22 +++++++++++++++++-----
 3 files changed, 34 insertions(+), 9 deletions(-)

diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index bd4a44a575ef..63907a1b4463 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -18,6 +18,7 @@ config SOC_VIRT
 	select RISCV_S_MODE
 	select BOARD_RISCV_GENERIC_DT
 	select HAS_CACHE
+	select HW_HAS_PCI
 	help
 	  Generates an image tht can be be booted by QEMU. The image is called
 	  barebox-dt-2nd.img
diff --git a/arch/riscv/configs/virt32_defconfig b/arch/riscv/configs/virt32_defconfig
index 218fee57b711..137f649d1548 100644
--- a/arch/riscv/configs/virt32_defconfig
+++ b/arch/riscv/configs/virt32_defconfig
@@ -10,14 +10,10 @@ CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
 CONFIG_MENU=y
-CONFIG_IMD_TARGET=y
 CONFIG_CONSOLE_ALLOW_COLOR=y
 CONFIG_PBL_CONSOLE=y
 CONFIG_PARTITION_DISK_EFI=y
 CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_BAREBOXENV_TARGET=y
-CONFIG_BAREBOXCRC32_TARGET=y
-CONFIG_POLLER=y
 CONFIG_STATE=y
 CONFIG_STATE_CRYPTO=y
 CONFIG_BOOTCHOOSER=y
@@ -47,6 +43,8 @@ CONFIG_CMD_SHA1SUM=y
 CONFIG_CMD_SHA256SUM=y
 CONFIG_CMD_MSLEEP=y
 CONFIG_CMD_SLEEP=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_CMD_EDIT=y
 CONFIG_CMD_SPLASH=y
 CONFIG_CMD_FBTEST=y
@@ -72,8 +70,13 @@ CONFIG_CMD_OF_OVERLAY=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_DHRYSTONE=y
+CONFIG_NET=y
+CONFIG_NET_NFS=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_NET_FASTBOOT=y
 CONFIG_DRIVER_SERIAL_NS16550=y
 CONFIG_VIRTIO_CONSOLE=y
+CONFIG_DRIVER_NET_VIRTIO=y
 CONFIG_DRIVER_SPI_GPIO=y
 CONFIG_I2C=y
 CONFIG_I2C_GPIO=y
@@ -88,18 +91,24 @@ CONFIG_DISK_WRITE=y
 CONFIG_VIRTIO_BLK=y
 CONFIG_VIDEO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_DRIVER_VIDEO_BOCHS_PCI=y
 CONFIG_DRIVER_VIDEO_SIMPLEFB_CLIENT=y
 CONFIG_CLOCKSOURCE_DUMMY_RATE=60000
 CONFIG_EEPROM_AT24=y
+CONFIG_VIRTIO_INPUT=y
 CONFIG_HWRNG=y
 CONFIG_HW_RANDOM_VIRTIO=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
 # CONFIG_PINCTRL is not set
+CONFIG_PCI_ECAM_GENERIC=y
+CONFIG_BLK_DEV_NVME=y
 CONFIG_SYSCON_REBOOT_MODE=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_FS_EXT4=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
 CONFIG_FS_FAT_LFN=y
@@ -114,3 +123,6 @@ CONFIG_XZ_DECOMPRESS=y
 CONFIG_BASE64=y
 CONFIG_LZO_DECOMPRESS=y
 CONFIG_DIGEST_CRC32_GENERIC=y
+CONFIG_IMD_TARGET=y
+CONFIG_BAREBOXENV_TARGET=y
+CONFIG_BAREBOXCRC32_TARGET=y
diff --git a/arch/riscv/configs/virt64_defconfig b/arch/riscv/configs/virt64_defconfig
index 04a4f1e2f4cb..7dbdaa126d17 100644
--- a/arch/riscv/configs/virt64_defconfig
+++ b/arch/riscv/configs/virt64_defconfig
@@ -1,5 +1,5 @@
-CONFIG_SOC_VIRT=y
 CONFIG_ARCH_RV64I=y
+CONFIG_SOC_VIRT=y
 CONFIG_RISCV_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_STACK_SIZE=0x20000
 CONFIG_MALLOC_SIZE=0x0
@@ -11,14 +11,10 @@ CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
 CONFIG_MENU=y
-CONFIG_IMD_TARGET=y
 CONFIG_CONSOLE_ALLOW_COLOR=y
 CONFIG_PBL_CONSOLE=y
 CONFIG_PARTITION_DISK_EFI=y
 CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_BAREBOXENV_TARGET=y
-CONFIG_BAREBOXCRC32_TARGET=y
-CONFIG_POLLER=y
 CONFIG_STATE=y
 CONFIG_STATE_CRYPTO=y
 CONFIG_BOOTCHOOSER=y
@@ -48,6 +44,8 @@ CONFIG_CMD_SHA1SUM=y
 CONFIG_CMD_SHA256SUM=y
 CONFIG_CMD_MSLEEP=y
 CONFIG_CMD_SLEEP=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
 CONFIG_CMD_EDIT=y
 CONFIG_CMD_SPLASH=y
 CONFIG_CMD_FBTEST=y
@@ -73,8 +71,13 @@ CONFIG_CMD_OF_OVERLAY=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_DHRYSTONE=y
+CONFIG_NET=y
+CONFIG_NET_NFS=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_NET_FASTBOOT=y
 CONFIG_DRIVER_SERIAL_NS16550=y
 CONFIG_VIRTIO_CONSOLE=y
+CONFIG_DRIVER_NET_VIRTIO=y
 CONFIG_DRIVER_SPI_GPIO=y
 CONFIG_I2C=y
 CONFIG_I2C_GPIO=y
@@ -89,18 +92,24 @@ CONFIG_DISK_WRITE=y
 CONFIG_VIRTIO_BLK=y
 CONFIG_VIDEO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_DRIVER_VIDEO_BOCHS_PCI=y
 CONFIG_DRIVER_VIDEO_SIMPLEFB_CLIENT=y
 CONFIG_CLOCKSOURCE_DUMMY_RATE=60000
 CONFIG_EEPROM_AT24=y
+CONFIG_VIRTIO_INPUT=y
 CONFIG_HWRNG=y
 CONFIG_HW_RANDOM_VIRTIO=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
 # CONFIG_PINCTRL is not set
+CONFIG_PCI_ECAM_GENERIC=y
+CONFIG_BLK_DEV_NVME=y
 CONFIG_SYSCON_REBOOT_MODE=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_FS_EXT4=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
 CONFIG_FS_FAT_LFN=y
@@ -115,3 +124,6 @@ CONFIG_XZ_DECOMPRESS=y
 CONFIG_BASE64=y
 CONFIG_LZO_DECOMPRESS=y
 CONFIG_DIGEST_CRC32_GENERIC=y
+CONFIG_IMD_TARGET=y
+CONFIG_BAREBOXENV_TARGET=y
+CONFIG_BAREBOXCRC32_TARGET=y
-- 
2.33.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] RISC-V: configs: virt: enable networking and PCI
  2021-11-22 20:50 [PATCH] RISC-V: configs: virt: enable networking and PCI Ahmad Fatoum
@ 2021-11-25  7:46 ` Sascha Hauer
  0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2021-11-25  7:46 UTC (permalink / raw)
  To: Ahmad Fatoum; +Cc: barebox

On Mon, Nov 22, 2021 at 09:50:56PM +0100, Ahmad Fatoum wrote:
> Recently, we have gained support for PCI and virtio networking. Enable
> both in the config as well as related useful options that depends on
> them.
> 
> Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
> ---
>  arch/riscv/Kconfig.socs             |  1 +
>  arch/riscv/configs/virt32_defconfig | 20 ++++++++++++++++----
>  arch/riscv/configs/virt64_defconfig | 22 +++++++++++++++++-----
>  3 files changed, 34 insertions(+), 9 deletions(-)

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-11-25  7:47 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-22 20:50 [PATCH] RISC-V: configs: virt: enable networking and PCI Ahmad Fatoum
2021-11-25  7:46 ` Sascha Hauer

mail archive of the barebox mailing list

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://lore.barebox.org/barebox/0 barebox/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 barebox barebox/ https://lore.barebox.org/barebox \
		barebox@lists.infradead.org
	public-inbox-index barebox

Example config snippet for mirrors.


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git