mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Xogium <contact@xogium.me>, Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 22/24] regulator: core: fall back to node name if no regulator-name property
Date: Sun, 20 Feb 2022 13:47:34 +0100	[thread overview]
Message-ID: <20220220124736.3052502-23-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20220220124736.3052502-1-a.fatoum@pengutronix.de>

So far, the regulator was created anyway, but attempting to print the
name by the regulator command just output a "<NULL>" string.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/regulator/core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index b2e5f8caa2ca..997b986d5f07 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -166,6 +166,8 @@ int of_regulator_register(struct regulator_dev *rd, struct device_node *node)
 	rd->always_on = of_property_read_bool(node, "regulator-always-on");
 
 	name = of_get_property(node, "regulator-name", NULL);
+	if (!name)
+		name = node->name;
 
 	ri = __regulator_register(rd, name);
 	if (IS_ERR(ri))
-- 
2.30.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  parent reply	other threads:[~2022-02-20 12:50 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-20 12:47 [PATCH 00/24] ARM: stm32mp: add trusted bootchain (SCMI&FIP) support Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 01/24] PBL: fdt: factor reg property parsing into helper Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 02/24] pinctrl: stm32: use gpio-ranges instead of alias Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 03/24] ARM: stm32mp: simplify with build_stm32mp_image macro Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 04/24] ARM: stm32mp: change stm32image extension to .stm32 Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 05/24] filetype: detect TF-A Firmware Image Packages (FIP) Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 06/24] scripts: add tool to adjust bl33 load address in existing FIP Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 07/24] ARM: stm32mp: build extra barebox-stm32mp-generic-bl33.img Ahmad Fatoum
2022-02-21 10:35   ` [PATCH] fixup! " Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 08/24] ARM: stm32mp: ddrctrl: fix wrong register field widths Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 09/24] reset: stm32: drop stm32mp1_reset_ops indirection Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 10/24] reset: move stm32 reset code to drivers/power/reset Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 11/24] ARM: smccc: sync header with upstream Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 12/24] firmware: import Linux v5.13 SCMI support Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 13/24] reset: add " Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 14/24] clk: add SCMI clock driver Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 15/24] regulator: add SCMI regulator driver Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 16/24] clk: accept const arguments in clk_to_clk_hw/clk_hw_to_clk Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 17/24] serial: stm32: bail if clock_get_rate returns zero Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 18/24] clk: implement of_clk_hw_{onecell,simple}_get Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 19/24] clk: implement clk_hw_reparent Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 20/24] reset: add support for reset_control_status Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 21/24] clk: stm32mp1: sync with Linux v5.17-rc1 Ahmad Fatoum
2022-02-21 10:35   ` [PATCH] fixup! " Ahmad Fatoum
2022-02-20 12:47 ` Ahmad Fatoum [this message]
2022-02-20 12:47 ` [PATCH 23/24] ARM: dts: stm32mp: remove regulator-name override in stm32mp151.dtsi Ahmad Fatoum
2022-02-20 12:47 ` [PATCH 24/24] ARM: stm32mp: enable more config options Ahmad Fatoum
2022-02-23 10:57 ` [PATCH 00/24] ARM: stm32mp: add trusted bootchain (SCMI&FIP) support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220220124736.3052502-23-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=contact@xogium.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox