mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH v2] ARM: arch: dts: qspi: Add QSPI config to the NXP IMX8MN-EVK board
@ 2022-03-01 13:23 Joacim Zetterling
  2022-03-03  9:59 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Joacim Zetterling @ 2022-03-01 13:23 UTC (permalink / raw)
  To: barebox; +Cc: a.fatoum

Add QSPI support in the default config and DTS files for the
NXP IMX8MN-EVK board. To be able to use it You also need the
QSPI driver enabled.

Tested on the NXP IMX8MN-EVK board as well as on an IMX8MN
custom bord supporting a QSPI flash. Tested with the memory
dump command i.e. 'md -s /dev/m25p0'.

Signed-off-by: Joacim Zetterling <joacim.zetterling@westermo.com>
---

Changes v2:
  - Removed the "default" pinctrl names from iomuxc
  - Renamed the flexspi device name

 arch/arm/configs/imx_v8_defconfig |  1 +
 arch/arm/dts/imx8mn-evk.dts       | 30 ++++++++++++++++++++++++++++++
 2 files changed, 31 insertions(+)

diff --git a/arch/arm/configs/imx_v8_defconfig b/arch/arm/configs/imx_v8_defconfig
index b28c868a99bf..fe6398cc873d 100644
--- a/arch/arm/configs/imx_v8_defconfig
+++ b/arch/arm/configs/imx_v8_defconfig
@@ -99,6 +99,7 @@ CONFIG_NET_USB=y
 CONFIG_NET_USB_ASIX=y
 CONFIG_NET_USB_SMSC95XX=y
 CONFIG_DRIVER_SPI_IMX=y
+CONFIG_SPI_NXP_FLEXSPI=y
 CONFIG_I2C=y
 CONFIG_I2C_IMX=y
 CONFIG_MTD=y
diff --git a/arch/arm/dts/imx8mn-evk.dts b/arch/arm/dts/imx8mn-evk.dts
index 9fe24b3184f1..b8e7e1acf539 100644
--- a/arch/arm/dts/imx8mn-evk.dts
+++ b/arch/arm/dts/imx8mn-evk.dts
@@ -60,3 +60,33 @@
 &ocotp {
 	barebox,provide-mac-address = <&fec1 0x640>;
 };
+
+&iomuxc {
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+		MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x1c4
+		MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x84
+		MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x84
+		MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x84
+		MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x84
+		MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x84
+		>;
+	};
+};
+
+&flexspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+
+	system_flash: flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
-- 
2.25.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH v2] ARM: arch: dts: qspi: Add QSPI config to the NXP IMX8MN-EVK board
  2022-03-01 13:23 [PATCH v2] ARM: arch: dts: qspi: Add QSPI config to the NXP IMX8MN-EVK board Joacim Zetterling
@ 2022-03-03  9:59 ` Sascha Hauer
  0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2022-03-03  9:59 UTC (permalink / raw)
  To: Joacim Zetterling; +Cc: barebox, a.fatoum

On Tue, Mar 01, 2022 at 02:23:08PM +0100, Joacim Zetterling wrote:
> Add QSPI support in the default config and DTS files for the
> NXP IMX8MN-EVK board. To be able to use it You also need the
> QSPI driver enabled.
> 
> Tested on the NXP IMX8MN-EVK board as well as on an IMX8MN
> custom bord supporting a QSPI flash. Tested with the memory
> dump command i.e. 'md -s /dev/m25p0'.
> 
> Signed-off-by: Joacim Zetterling <joacim.zetterling@westermo.com>
> ---

Applied, thanks

Sascha

> 
> Changes v2:
>   - Removed the "default" pinctrl names from iomuxc
>   - Renamed the flexspi device name
> 
>  arch/arm/configs/imx_v8_defconfig |  1 +
>  arch/arm/dts/imx8mn-evk.dts       | 30 ++++++++++++++++++++++++++++++
>  2 files changed, 31 insertions(+)
> 
> diff --git a/arch/arm/configs/imx_v8_defconfig b/arch/arm/configs/imx_v8_defconfig
> index b28c868a99bf..fe6398cc873d 100644
> --- a/arch/arm/configs/imx_v8_defconfig
> +++ b/arch/arm/configs/imx_v8_defconfig
> @@ -99,6 +99,7 @@ CONFIG_NET_USB=y
>  CONFIG_NET_USB_ASIX=y
>  CONFIG_NET_USB_SMSC95XX=y
>  CONFIG_DRIVER_SPI_IMX=y
> +CONFIG_SPI_NXP_FLEXSPI=y
>  CONFIG_I2C=y
>  CONFIG_I2C_IMX=y
>  CONFIG_MTD=y
> diff --git a/arch/arm/dts/imx8mn-evk.dts b/arch/arm/dts/imx8mn-evk.dts
> index 9fe24b3184f1..b8e7e1acf539 100644
> --- a/arch/arm/dts/imx8mn-evk.dts
> +++ b/arch/arm/dts/imx8mn-evk.dts
> @@ -60,3 +60,33 @@
>  &ocotp {
>  	barebox,provide-mac-address = <&fec1 0x640>;
>  };
> +
> +&iomuxc {
> +	pinctrl_flexspi0: flexspi0grp {
> +		fsl,pins = <
> +		MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x1c4
> +		MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x84
> +		MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x84
> +		MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x84
> +		MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x84
> +		MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x84
> +		>;
> +	};
> +};
> +
> +&flexspi {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexspi0>;
> +
> +	system_flash: flash@0 {
> +		reg = <0>;
> +		compatible = "jedec,spi-nor";
> +		spi-max-frequency = <80000000>;
> +		spi-tx-bus-width = <4>;
> +		spi-rx-bus-width = <4>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +	};
> +};
> +
> -- 
> 2.25.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2022-03-03 10:01 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-01 13:23 [PATCH v2] ARM: arch: dts: qspi: Add QSPI config to the NXP IMX8MN-EVK board Joacim Zetterling
2022-03-03  9:59 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox