From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: ukl@pengutronix.de, "Daniel Brát" <danek.brat@gmail.com>,
ore@pengutronix.de
Subject: [PATCH 00/15] ARM: rpi: add basic Raspberry Pi 4 support
Date: Thu, 5 May 2022 10:01:37 +0200 [thread overview]
Message-ID: <20220505080152.1068424-1-a.fatoum@pengutronix.de> (raw)
Just basic support, so we get a shell on mini-uart and SD
working. Needs more work for USB and Ethernet, but I'll leave that
to others now that the initial hurdle is overcome.
I tested this series on Raspberry Pi 3b (both 32-bit and newly
added 64-bit support) and Raspberry Pi 4b (both 32/64-bit).
@Oleksij, could you give this a test on Raspberry Pi 2 as well?
barebox-dt-2nd.img is the image to use for all configurations.
barebox didn't start up (or at least serial was silent) with
Daily built Debian raspi_4_bullseye.img. Worked fine though
with firmware in 2022-04-04-raspios-bullseye-arm64-lite.img.
If in doubt, use firmware described in barebox documentation.
Boot log:
barebox 2022.04.0-00101-g5fea3e8979b2 #205 Tue May 3 09:33:54 CEST 2022
Board: Raspberry Pi 4 Model B Rev 1.1
Deep probe supported due to raspberrypi,4-model-b
bcm2835_mci fe300000.mmc@7e300000.of: registered as mci0
WARNING: dwc2 fe980000.usb@7e980000.of: dwc2_core_reset: Timeout! Waiting for Core Soft Reset
ERROR: dwc2 fe980000.usb@7e980000.of: probe failed: Connection timed out
WARNING: bcm2835_mci fe340000.mmc@7e340000.of: Failed to get 'vmmc' regulator (ignored).
bcm2835_mci fe340000.mmc@7e340000.of: registered as mci1
ERROR: translation of DMA address(400000000) to CPU address failed node(pcie@7d500000)
malloc space: 0x1d8fc800 -> 0x3b1f8fff (size 473 MiB)
mci1: detected SD card version 2.0
mci1: registered disk0
environment load /boot/barebox.env: No such file or directory
Maybe you have to create the partition.
Ahmad Fatoum (13):
PBL: fdt: fix /memory parsing when #address-cells != #size-cells
serial: ns16550: rpi: remove ungating now done by proper clk driver
ARM: cpu: prevent recursive dependencies via CPU_SUPPORTS_64BIT_KERNEL
ARM: rpi: add Raspberry Pi 3 64-bit build support
ARM: rpi: rpi3: disallow MMU_EARLY && 64BIT
clk: rpi: add Raspberry Pi 4 support
serial: ns16550: rpi: skip baudrate changes for bcm2711
clocksource: bcm2835: bump below architeced timer for AArch64
ARM: rpi: add Raspberry Pi 4 support
ARM: rpi: add debug_ll support for Raspberry Pi 4
ARM: rpi: add heuristic for skipping detection of SDIO card
doc: bcm283x: add initial docs for Raspberry Pi 4 support
doc: bcm283x: reference newer firmware
Uwe Kleine-König (2):
of: address: fix printing of OF node name in error message
mci: bcm2835: add bcm2711-emmc2 (Rpi4) support
Documentation/boards/bcm2835.rst | 65 ++++++++--
arch/arm/Kconfig | 4 +
arch/arm/boards/raspberry-pi/rpi-common.c | 51 +++++++-
arch/arm/configs/rpi_v8a_defconfig | 111 ++++++++++++++++++
arch/arm/cpu/Kconfig | 1 -
arch/arm/dts/Makefile | 1 +
arch/arm/dts/bcm2711-rpi-4-b.dts | 1 +
arch/arm/mach-bcm283x/Kconfig | 28 ++++-
arch/arm/mach-bcm283x/include/mach/debug_ll.h | 21 ++++
arch/arm/mach-bcm283x/include/mach/mbox.h | 4 +
arch/arm/mach-bcm283x/include/mach/platform.h | 5 +-
arch/arm/mach-bcm283x/mbox.c | 2 +-
common/Kconfig | 7 ++
drivers/clk/clk-rpi.c | 42 +++++--
drivers/clocksource/bcm2835.c | 3 +-
drivers/mci/mci-bcm2835.c | 4 +-
drivers/of/address.c | 4 +-
drivers/serial/serial_ns16550.c | 18 ++-
images/Makefile.bcm283x | 6 +
pbl/fdt.c | 2 +-
20 files changed, 341 insertions(+), 39 deletions(-)
create mode 100644 arch/arm/configs/rpi_v8a_defconfig
create mode 100644 arch/arm/dts/bcm2711-rpi-4-b.dts
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2022-05-05 8:03 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-05 8:01 Ahmad Fatoum [this message]
2022-05-05 8:01 ` [PATCH 01/15] PBL: fdt: fix /memory parsing when #address-cells != #size-cells Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 02/15] of: address: fix printing of OF node name in error message Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 03/15] serial: ns16550: rpi: remove ungating now done by proper clk driver Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 04/15] ARM: cpu: prevent recursive dependencies via CPU_SUPPORTS_64BIT_KERNEL Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 05/15] ARM: rpi: add Raspberry Pi 3 64-bit build support Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 06/15] ARM: rpi: rpi3: disallow MMU_EARLY && 64BIT Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 07/15] clk: rpi: add Raspberry Pi 4 support Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 08/15] mci: bcm2835: add bcm2711-emmc2 (Rpi4) support Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 09/15] serial: ns16550: rpi: skip baudrate changes for bcm2711 Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 10/15] clocksource: bcm2835: bump below architeced timer for AArch64 Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 11/15] ARM: rpi: add Raspberry Pi 4 support Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 12/15] ARM: rpi: add debug_ll support for Raspberry Pi 4 Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 13/15] ARM: rpi: add heuristic for skipping detection of SDIO card Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 14/15] doc: bcm283x: add initial docs for Raspberry Pi 4 support Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 15/15] doc: bcm283x: reference newer firmware Ahmad Fatoum
2022-05-06 12:47 ` [PATCH 00/15] ARM: rpi: add basic Raspberry Pi 4 support Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220505080152.1068424-1-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=danek.brat@gmail.com \
--cc=ore@pengutronix.de \
--cc=ukl@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox