From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: ukl@pengutronix.de, "Daniel Brát" <danek.brat@gmail.com>,
ore@pengutronix.de, "Ahmad Fatoum" <a.fatoum@pengutronix.de>
Subject: [PATCH 03/15] serial: ns16550: rpi: remove ungating now done by proper clk driver
Date: Thu, 5 May 2022 10:01:40 +0200 [thread overview]
Message-ID: <20220505080152.1068424-4-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20220505080152.1068424-1-a.fatoum@pengutronix.de>
We have bcm2835-aux-clk driver that will take care to ungate the clock,
so we can remove this Raspberry Pi 3 specific detail from the driver.
Tested on Raspberry Pi 3b.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/serial/serial_ns16550.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
index f93a89ab95b2..e936711bf816 100644
--- a/drivers/serial/serial_ns16550.c
+++ b/drivers/serial/serial_ns16550.c
@@ -240,14 +240,10 @@ static void ns16550_jz_init_port(struct console_device *cdev)
ns16550_serial_init_port(cdev);
}
-#define BCM2836_AUX_CLOCK_ENB 0x3f215004 /* BCM2835 AUX Clock enable register */
-#define BCM2836_AUX_CLOCK_EN_UART BIT(0) /* Bit 0 enables the Miniuart */
-
static void rpi_init_port(struct console_device *cdev)
{
struct ns16550_priv *priv = to_ns16550_priv(cdev);
- writeb(BCM2836_AUX_CLOCK_EN_UART, BCM2836_AUX_CLOCK_ENB);
priv->plat.shift = 2;
/*
* We double the clock rate since the 16550 will divide by 16
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2022-05-05 8:03 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-05 8:01 [PATCH 00/15] ARM: rpi: add basic Raspberry Pi 4 support Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 01/15] PBL: fdt: fix /memory parsing when #address-cells != #size-cells Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 02/15] of: address: fix printing of OF node name in error message Ahmad Fatoum
2022-05-05 8:01 ` Ahmad Fatoum [this message]
2022-05-05 8:01 ` [PATCH 04/15] ARM: cpu: prevent recursive dependencies via CPU_SUPPORTS_64BIT_KERNEL Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 05/15] ARM: rpi: add Raspberry Pi 3 64-bit build support Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 06/15] ARM: rpi: rpi3: disallow MMU_EARLY && 64BIT Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 07/15] clk: rpi: add Raspberry Pi 4 support Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 08/15] mci: bcm2835: add bcm2711-emmc2 (Rpi4) support Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 09/15] serial: ns16550: rpi: skip baudrate changes for bcm2711 Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 10/15] clocksource: bcm2835: bump below architeced timer for AArch64 Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 11/15] ARM: rpi: add Raspberry Pi 4 support Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 12/15] ARM: rpi: add debug_ll support for Raspberry Pi 4 Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 13/15] ARM: rpi: add heuristic for skipping detection of SDIO card Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 14/15] doc: bcm283x: add initial docs for Raspberry Pi 4 support Ahmad Fatoum
2022-05-05 8:01 ` [PATCH 15/15] doc: bcm283x: reference newer firmware Ahmad Fatoum
2022-05-06 12:47 ` [PATCH 00/15] ARM: rpi: add basic Raspberry Pi 4 support Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220505080152.1068424-4-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=danek.brat@gmail.com \
--cc=ore@pengutronix.de \
--cc=ukl@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox