From: Marco Felsch <m.felsch@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 0/4] MX8MN-EVK DDR4 Support
Date: Wed, 6 Jul 2022 16:21:01 +0200 [thread overview]
Message-ID: <20220706142105.2266956-1-m.felsch@pengutronix.de> (raw)
Hi,
this small series adds the correct DDR4 support for the imx8mn-evk since
till now we misused the LPDDR4 DT for it.
Before applying Ahmads patch the preceding patches must be applied else
the deep probe support will cause odd boot issues.
Regards,
Marco
Ahmad Fatoum (1):
ARM: i.MX8MN: pass along correct DT depending on variant
Marco Felsch (3):
phy: fix deep probe support
phy: propagate error in of_phy_get_by_phandle
usb: chipidea: imx: call enable_clk after all resources are requested
arch/arm/boards/nxp-imx8mn-evk/board.c | 21 ++++--
arch/arm/boards/nxp-imx8mn-evk/lowlevel.c | 13 +++-
arch/arm/dts/Makefile | 2 +-
arch/arm/dts/imx8mn-ddr4-evk.dts | 6 ++
arch/arm/dts/imx8mn-evk.dts | 84 +----------------------
arch/arm/dts/imx8mn-evk.dtsi | 83 ++++++++++++++++++++++
drivers/phy/phy-core.c | 11 +--
drivers/usb/imx/chipidea-imx.c | 10 ++-
8 files changed, 131 insertions(+), 99 deletions(-)
create mode 100644 arch/arm/dts/imx8mn-ddr4-evk.dts
create mode 100644 arch/arm/dts/imx8mn-evk.dtsi
--
2.30.2
next reply other threads:[~2022-07-06 14:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-06 14:21 Marco Felsch [this message]
2022-07-06 14:21 ` [PATCH 1/4] phy: fix deep probe support Marco Felsch
2022-07-07 14:39 ` Johannes Zink
2022-07-06 14:21 ` [PATCH 2/4] phy: propagate error in of_phy_get_by_phandle Marco Felsch
2022-07-07 14:39 ` Johannes Zink
2022-07-06 14:21 ` [PATCH 3/4] usb: chipidea: imx: call enable_clk after all resources are requested Marco Felsch
2022-07-07 14:40 ` Johannes Zink
2022-07-06 14:21 ` [PATCH 4/4] ARM: i.MX8MN: pass along correct DT depending on variant Marco Felsch
2022-07-11 9:22 ` [PATCH 0/4] MX8MN-EVK DDR4 Support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220706142105.2266956-1-m.felsch@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox