From: Sascha Hauer <sha@pengutronix.de>
To: Renaud Barbier <Renaud.Barbier@ametek.com>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH v3 0/2] Initial LS1021-IOT board support
Date: Tue, 14 Mar 2023 14:51:23 +0100 [thread overview]
Message-ID: <20230314135123.GI7446@pengutronix.de> (raw)
In-Reply-To: <BL0PR07MB5665108F4F12614684A2569BECB99@BL0PR07MB5665.namprd07.prod.outlook.com>
Hi Renaud,
On Mon, Mar 13, 2023 at 02:43:26PM +0000, Renaud Barbier wrote:
> After the acceptance of the architected timer, the LS1021A support is sent
> again as two patches.
>
> The LS1021A-IOT is NXP ARMv7 Layerscape evaluation board.
>
> These patches provide a basic board support with:
> - DDR3
> - UART
> - boot from SPI
>
> The code is ported from NXP U-boot 2021-04.
>
> Renaud Barbier (2):
> ARM: add LS1021A to Layerscape machine support
> ARM: Layerscape: Add LS1021A IOT board support
Applied with some changes. First I rebased on current -next which means
renaming arch/arm/mach-layerscape/include/mach/ to
include/mach/layerscape/. Then setting CONFIG_ARCH_TEXT_BASE shouldn't
be needed. Also I renamed back some layerscape_ prefixes to ls1046a_ and
ls1021a_. Please check the result in current -next.
Sascha
>
> arch/arm/boards/Makefile | 1 +
> arch/arm/boards/ls1021aiot/Makefile | 3 +
> arch/arm/boards/ls1021aiot/board.c | 47 +++
> arch/arm/boards/ls1021aiot/lowlevel.c | 120 ++++++
> arch/arm/boards/ls1021aiot/ls102xa_pbi.cfg | 11 +
> .../boards/ls1021aiot/ls102xa_rcw_sd_qspi.cfg | 8 +
> arch/arm/boards/ls1021aiot/start.S | 11 +
> arch/arm/boards/ls1046ardb/lowlevel.c | 2 +-
> arch/arm/boards/tqmls1046a/board.c | 2 +-
> arch/arm/boards/tqmls1046a/lowlevel.c | 2 +-
> arch/arm/configs/layerscape_v7_defconfig | 94 +++++
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/fsl-ls1021a-iot.dts | 77 ++++
> arch/arm/mach-layerscape/Kconfig | 14 +
> arch/arm/mach-layerscape/Makefile | 9 +-
> arch/arm/mach-layerscape/boot.c | 11 +-
> arch/arm/mach-layerscape/errata.c | 76 +++-
> .../mach-layerscape/include/mach/debug_ll.h | 5 +-
> .../arm/mach-layerscape/include/mach/errata.h | 2 +
> .../mach-layerscape/include/mach/fsl_epu.h | 67 +++
> .../mach-layerscape/include/mach/layerscape.h | 7 +-
> .../mach-layerscape/include/mach/lowlevel.h | 1 +
> arch/arm/mach-layerscape/include/mach/xload.h | 4 +
> arch/arm/mach-layerscape/lowlevel-ls102xa.c | 389 ++++++++++++++++++
> arch/arm/mach-layerscape/ls102xa_stream_id.c | 55 +++
> arch/arm/mach-layerscape/restart.c | 30 ++
> arch/arm/mach-layerscape/xload-qspi.c | 43 +-
> arch/arm/mach-layerscape/xload.c | 20 +-
> images/Makefile.layerscape | 9 +
> include/soc/fsl/immap_lsch2.h | 171 +++++++-
> 30 files changed, 1255 insertions(+), 37 deletions(-)
> create mode 100644 arch/arm/boards/ls1021aiot/Makefile
> create mode 100644 arch/arm/boards/ls1021aiot/board.c
> create mode 100644 arch/arm/boards/ls1021aiot/lowlevel.c
> create mode 100644 arch/arm/boards/ls1021aiot/ls102xa_pbi.cfg
> create mode 100644 arch/arm/boards/ls1021aiot/ls102xa_rcw_sd_qspi.cfg
> create mode 100644 arch/arm/boards/ls1021aiot/start.S
> create mode 100644 arch/arm/configs/layerscape_v7_defconfig
> create mode 100644 arch/arm/dts/fsl-ls1021a-iot.dts
> create mode 100644 arch/arm/mach-layerscape/include/mach/fsl_epu.h
> create mode 100644 arch/arm/mach-layerscape/lowlevel-ls102xa.c
> create mode 100644 arch/arm/mach-layerscape/ls102xa_stream_id.c
> create mode 100644 arch/arm/mach-layerscape/restart.c
>
> --
> 2.27.0
>
>
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2023-03-14 13:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-13 14:43 Renaud Barbier
2023-03-14 13:51 ` Sascha Hauer [this message]
2023-03-14 17:37 ` Renaud Barbier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230314135123.GI7446@pengutronix.de \
--to=sha@pengutronix.de \
--cc=Renaud.Barbier@ametek.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox