From: Renaud Barbier <Renaud.Barbier@ametek.com>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH v3 0/2] Initial LS1021-IOT board support
Date: Mon, 13 Mar 2023 14:43:26 +0000 [thread overview]
Message-ID: <BL0PR07MB5665108F4F12614684A2569BECB99@BL0PR07MB5665.namprd07.prod.outlook.com> (raw)
After the acceptance of the architected timer, the LS1021A support is sent
again as two patches.
The LS1021A-IOT is NXP ARMv7 Layerscape evaluation board.
These patches provide a basic board support with:
- DDR3
- UART
- boot from SPI
The code is ported from NXP U-boot 2021-04.
Renaud Barbier (2):
ARM: add LS1021A to Layerscape machine support
ARM: Layerscape: Add LS1021A IOT board support
arch/arm/boards/Makefile | 1 +
arch/arm/boards/ls1021aiot/Makefile | 3 +
arch/arm/boards/ls1021aiot/board.c | 47 +++
arch/arm/boards/ls1021aiot/lowlevel.c | 120 ++++++
arch/arm/boards/ls1021aiot/ls102xa_pbi.cfg | 11 +
.../boards/ls1021aiot/ls102xa_rcw_sd_qspi.cfg | 8 +
arch/arm/boards/ls1021aiot/start.S | 11 +
arch/arm/boards/ls1046ardb/lowlevel.c | 2 +-
arch/arm/boards/tqmls1046a/board.c | 2 +-
arch/arm/boards/tqmls1046a/lowlevel.c | 2 +-
arch/arm/configs/layerscape_v7_defconfig | 94 +++++
arch/arm/dts/Makefile | 1 +
arch/arm/dts/fsl-ls1021a-iot.dts | 77 ++++
arch/arm/mach-layerscape/Kconfig | 14 +
arch/arm/mach-layerscape/Makefile | 9 +-
arch/arm/mach-layerscape/boot.c | 11 +-
arch/arm/mach-layerscape/errata.c | 76 +++-
.../mach-layerscape/include/mach/debug_ll.h | 5 +-
.../arm/mach-layerscape/include/mach/errata.h | 2 +
.../mach-layerscape/include/mach/fsl_epu.h | 67 +++
.../mach-layerscape/include/mach/layerscape.h | 7 +-
.../mach-layerscape/include/mach/lowlevel.h | 1 +
arch/arm/mach-layerscape/include/mach/xload.h | 4 +
arch/arm/mach-layerscape/lowlevel-ls102xa.c | 389 ++++++++++++++++++
arch/arm/mach-layerscape/ls102xa_stream_id.c | 55 +++
arch/arm/mach-layerscape/restart.c | 30 ++
arch/arm/mach-layerscape/xload-qspi.c | 43 +-
arch/arm/mach-layerscape/xload.c | 20 +-
images/Makefile.layerscape | 9 +
include/soc/fsl/immap_lsch2.h | 171 +++++++-
30 files changed, 1255 insertions(+), 37 deletions(-)
create mode 100644 arch/arm/boards/ls1021aiot/Makefile
create mode 100644 arch/arm/boards/ls1021aiot/board.c
create mode 100644 arch/arm/boards/ls1021aiot/lowlevel.c
create mode 100644 arch/arm/boards/ls1021aiot/ls102xa_pbi.cfg
create mode 100644 arch/arm/boards/ls1021aiot/ls102xa_rcw_sd_qspi.cfg
create mode 100644 arch/arm/boards/ls1021aiot/start.S
create mode 100644 arch/arm/configs/layerscape_v7_defconfig
create mode 100644 arch/arm/dts/fsl-ls1021a-iot.dts
create mode 100644 arch/arm/mach-layerscape/include/mach/fsl_epu.h
create mode 100644 arch/arm/mach-layerscape/lowlevel-ls102xa.c
create mode 100644 arch/arm/mach-layerscape/ls102xa_stream_id.c
create mode 100644 arch/arm/mach-layerscape/restart.c
--
2.27.0
next reply other threads:[~2023-03-13 14:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-13 14:43 Renaud Barbier [this message]
2023-03-14 13:51 ` Sascha Hauer
2023-03-14 17:37 ` Renaud Barbier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BL0PR07MB5665108F4F12614684A2569BECB99@BL0PR07MB5665.namprd07.prod.outlook.com \
--to=renaud.barbier@ametek.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox