mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 1/1] commands: add pwm manipulation command
@ 2023-05-27 23:24 Marc Reilly
  2023-05-28  5:10 ` Jookia
  0 siblings, 1 reply; 2+ messages in thread
From: Marc Reilly @ 2023-05-27 23:24 UTC (permalink / raw)
  To: barebox

This introduces a command to set parameters for a pwm device.

Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
---
 commands/Kconfig  |  11 ++++
 commands/Makefile |   1 +
 commands/pwm.c    | 149 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 161 insertions(+)
 create mode 100644 commands/pwm.c

diff --git a/commands/Kconfig b/commands/Kconfig
index 4d3ff631a8..f90111bd42 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -1929,6 +1929,17 @@ config CMD_I2C
 		  -w		use word (16 bit) wide access
 		  -v		verbose
 
+config CMD_PWM
+	bool
+	depends on PWM
+	prompt "PWM commands: pwm_set"
+	help
+	  pwm_set - set pwm state
+
+	  Usage: pwm_set [ndDPfwis]
+
+ 	  Controls the pwm values such as period and duty cycle
+
 config CMD_LED
 	bool
 	depends on LED
diff --git a/commands/Makefile b/commands/Makefile
index 98625a0373..011ae59427 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_CMD_GPIO)		+= gpio.o
 obj-$(CONFIG_CMD_UNCOMPRESS)	+= uncompress.o
 obj-$(CONFIG_CMD_I2C)		+= i2c.o
 obj-$(CONFIG_CMD_SPI)		+= spi.o
+obj-$(CONFIG_CMD_PWM)		+= pwm.o
 obj-$(CONFIG_CMD_MIPI_DBI)	+= mipi_dbi.o
 obj-$(CONFIG_CMD_UBI)		+= ubi.o
 obj-$(CONFIG_CMD_UBIFORMAT)	+= ubiformat.o
diff --git a/commands/pwm.c b/commands/pwm.c
new file mode 100644
index 0000000000..f638ea60a4
--- /dev/null
+++ b/commands/pwm.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: © 2023 Marc Reilly <marc@cpdesign.com.au>
+
+/* pwm - pwm commands */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <malloc.h>
+#include <getopt.h>
+#include <pwm.h>
+
+#define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
+
+static int do_pwm_set(int argc, char *argv[])
+{
+	struct pwm_device *pwm = NULL;
+	struct pwm_state state;
+	int error = 0;
+	char namebuf[128];
+	char *devname = NULL;
+	int n = -1, polarity = -1, duty = -1, period = -1, freq = -1, width = -1, opt;
+	int stop = -1;
+
+	while ((opt = getopt(argc, argv, "n:d:D:P:f:w:i:s")) > 0) {
+		switch (opt) {
+		case 'n':
+			n = simple_strtol(optarg, NULL, 0);
+			break;
+		case 'd':
+			devname = optarg;
+			break;
+		case 'D':
+			duty = simple_strtol(optarg, NULL, 0);
+			break;
+		case 'P':
+			period = simple_strtol(optarg, NULL, 0);
+			break;
+		case 'f':
+			freq = simple_strtol(optarg, NULL, 0);
+			break;
+		case 'w':
+			width = simple_strtol(optarg, NULL, 0);
+			break;
+		case 'i':
+			polarity = simple_strtol(optarg, NULL, 0);
+			break;
+		case 's':
+			stop = 1;
+			break;
+		}
+	}
+
+	if ((n < 0) && !devname) {
+		printf(" need to specify a device\n");
+		return COMMAND_ERROR_USAGE;
+	}
+	if ((freq == 0) || (period == 0)) {
+		printf(" period or freqency needs to be non-zero\n");
+		return COMMAND_ERROR_USAGE;
+	}
+
+	if (!devname) {
+		sprintf(namebuf, "pwm%d", n);
+	} else {
+		strcpy(namebuf, devname);
+	}
+
+	pwm = pwm_request(namebuf);
+	if (!pwm) {
+		printf("pwm device %s not found\n", namebuf);
+		return -ENODEV;
+	}
+
+	pwm_get_state(pwm, &state);
+
+	if ((state.period_ns == 0)
+			&& (freq < 0) && (duty < 0) && (period < 0)) {
+		printf(" need to know some timing info; freq or dury/period\n");
+		return COMMAND_ERROR_USAGE;
+	}
+
+	if (polarity >= 0)
+		state.polarity = polarity;
+
+	/* period */
+	if (freq > 0) {
+		state.p_enable = true;
+		state.period_ns = HZ_TO_NANOSECONDS(freq);
+		if (width < 0) {
+			width = 50;
+		}
+	} else if (period > 0) {
+		state.p_enable = true;
+		state.period_ns = period;
+	}
+
+	/* duty */
+	if (width >= 0) {
+		if (width > 100)
+			width = 100;
+
+		pwm_set_relative_duty_cycle(&state, width, 100);
+	} else if (duty >= 0) {
+		if (duty > state.period_ns)
+			printf(" warning: duty_ns is greater than period\n");
+
+		state.duty_ns = duty;
+	}
+
+	error = pwm_apply_state(pwm, &state);
+
+	if (stop > 0) {
+		state.p_enable = false;
+		error = pwm_apply_state(pwm, &state);
+	}
+
+	pwm_free(pwm);
+
+	return error;
+}
+
+BAREBOX_CMD_HELP_START(pwm_set)
+BAREBOX_CMD_HELP_TEXT("Sets a pwm device parameters.")
+BAREBOX_CMD_HELP_TEXT(" Specify the device either by device name or pwm number")
+BAREBOX_CMD_HELP_TEXT(" Timings can either be specified via period + duty (on) duration,")
+BAREBOX_CMD_HELP_TEXT("  or via frequency. Duty can be given either as a percentage or time")
+BAREBOX_CMD_HELP_TEXT(" If a parameter is not specified, the current value will be used")
+BAREBOX_CMD_HELP_TEXT("  where possible.")
+BAREBOX_CMD_HELP_TEXT(" Stopping the device does not necessarily set the output to inactive.")
+BAREBOX_CMD_HELP_TEXT(" To set an output to inactive use, set the duty to 0.")
+BAREBOX_CMD_HELP_TEXT("Options:")
+BAREBOX_CMD_HELP_OPT("-d number", "device name (eg 'pwm0')")
+BAREBOX_CMD_HELP_OPT("-n number", "pwm chip number (default 0, assumes device has 'pwmX' name)")
+BAREBOX_CMD_HELP_OPT("-D number", "duty cycle (ns)")
+BAREBOX_CMD_HELP_OPT("-P number", "period (ns)")
+BAREBOX_CMD_HELP_OPT("-f number", "frequency (Hz)")
+BAREBOX_CMD_HELP_OPT("-w number", "duty cycle (%) - on 'width' of each cycle")
+BAREBOX_CMD_HELP_OPT("-i number", "line inverted polarity")
+BAREBOX_CMD_HELP_OPT("-s\t", "stop (disable) the pwm device")
+BAREBOX_CMD_HELP_END
+
+BAREBOX_CMD_START(pwm_set)
+	.cmd		= do_pwm_set,
+	BAREBOX_CMD_DESC("set pwm")
+	BAREBOX_CMD_OPTS("[-dnDPfwis]")
+	BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP)
+	BAREBOX_CMD_HELP(cmd_pwm_set_help)
+BAREBOX_CMD_END
-- 
2.35.3




^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2023-05-28  5:12 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-05-27 23:24 [PATCH 1/1] commands: add pwm manipulation command Marc Reilly
2023-05-28  5:10 ` Jookia

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox