* [PATCH] ARM: boards: i.MX93: use kernel dts
@ 2026-07-29 13:47 Fabian Pflug
0 siblings, 0 replies; only message in thread
From: Fabian Pflug @ 2026-07-29 13:47 UTC (permalink / raw)
To: barebox; +Cc: Fabian Pflug
All the information are in the kernel dts now and can be included from
there.
Signed-off-by: Fabian Pflug <f.pflug@pengutronix.de>
---
arch/arm/dts/imx93-frdm.dts | 531 +-----------------------------------
1 file changed, 1 insertion(+), 530 deletions(-)
diff --git a/arch/arm/dts/imx93-frdm.dts b/arch/arm/dts/imx93-frdm.dts
index da828abf22..336ba167b9 100644
--- a/arch/arm/dts/imx93-frdm.dts
+++ b/arch/arm/dts/imx93-frdm.dts
@@ -1,534 +1,5 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/dts-v1/;
-#include <dt-bindings/usb/pd.h>
-#include <arm64/freescale/imx93.dtsi>
-
-/ {
- compatible = "fsl,imx93-11x11-frdm", "fsl,imx93";
- model = "NXP i.MX93 11X11 FRDM board";
-
- aliases {
- mmc0 = &usdhc1; /* EMMC */
- mmc1 = &usdhc2; /* uSD */
- rtc0 = &pcf2131;
- serial0 = &lpuart1;
- };
-
- chosen {
- stdout-path = &lpuart1;
- };
-
- reg_vref_1v8: regulator-adc-vref {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vref_1v8";
- };
-
- reg_can2_standby: regulator-can2-stby {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "can2-stby";
- gpio = <&pcal6524 23 GPIO_ACTIVE_LOW>;
- };
-
- reg_usdhc2_vmmc: regulator-usdhc2 {
- compatible = "regulator-fixed";
- off-on-delay-us = <12000>;
- pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
- pinctrl-names = "default";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "VSD_3V3";
- gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&eqos {
- phy-handle = <ðphy1>;
- phy-mode = "rgmii-id";
- pinctrl-0 = <&pinctrl_eqos>;
- pinctrl-1 = <&pinctrl_eqos_sleep>;
- pinctrl-names = "default", "sleep";
- status = "okay";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <5000000>;
-
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- reset-assert-us = <10000>;
- reset-deassert-us = <80000>;
- reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&fec {
- phy-handle = <ðphy2>;
- phy-mode = "rgmii-id";
- pinctrl-0 = <&pinctrl_fec>;
- pinctrl-1 = <&pinctrl_fec_sleep>;
- pinctrl-names = "default", "sleep";
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <5000000>;
-
- ethphy2: ethernet-phy@2 {
- reg = <2>;
- eee-broken-1000t;
- reset-assert-us = <10000>;
- reset-deassert-us = <80000>;
- reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&lpi2c2 {
- clock-frequency = <400000>;
- pinctrl-0 = <&pinctrl_lpi2c2>;
- pinctrl-names = "default";
- status = "okay";
-
- pcal6524: gpio@22 {
- compatible = "nxp,pcal6524";
- reg = <0x22>;
- #interrupt-cells = <2>;
- interrupt-controller;
- interrupt-parent = <&gpio3>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
- #gpio-cells = <2>;
- gpio-controller;
- pinctrl-0 = <&pinctrl_pcal6524>;
- pinctrl-names = "default";
- };
-
- pmic@25 {
- compatible = "nxp,pca9451a";
- reg = <0x25>;
- interrupt-parent = <&pcal6524>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-
- regulators {
-
- buck1: BUCK1 {
- regulator-name = "BUCK1";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <650000>;
- regulator-max-microvolt = <2237500>;
- regulator-ramp-delay = <3125>;
- };
-
- buck2: BUCK2 {
- regulator-name = "BUCK2";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
- regulator-ramp-delay = <3125>;
- };
-
- buck4: BUCK4 {
- regulator-name = "BUCK4";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
- };
-
- buck5: BUCK5 {
- regulator-name = "BUCK5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
- };
-
- buck6: BUCK6 {
- regulator-name = "BUCK6";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
- };
-
- ldo1: LDO1 {
- regulator-name = "LDO1";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo4: LDO4 {
- regulator-name = "LDO4";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo5: LDO5 {
- regulator-name = "LDO5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
- };
- };
-
- eeprom: eeprom@50 {
- compatible = "atmel,24c256";
- reg = <0x50>;
- pagesize = <64>;
- };
-};
-
-&lpi2c3 {
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <400000>;
- pinctrl-0 = <&pinctrl_lpi2c3>;
- pinctrl-names = "default";
- status = "okay";
-
- ptn5110: tcpc@50 {
- compatible = "nxp,ptn5110", "tcpci";
- reg = <0x50>;
- interrupt-parent = <&gpio3>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-
- typec1_con: connector {
- compatible = "usb-c-connector";
- data-role = "dual";
- label = "USB-C";
- op-sink-microwatt = <15000000>;
- power-role = "dual";
- self-powered;
- sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
- PDO_VAR(5000, 20000, 3000)>;
- source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- try-power-role = "sink";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- typec1_dr_sw: endpoint {
- remote-endpoint = <&usb1_drd_sw>;
- };
- };
- };
- };
- };
-
- pcf2131: rtc@53 {
- compatible = "nxp,pcf2131";
- reg = <0x53>;
- interrupt-parent = <&pcal6524>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
- };
-};
-
-&lpuart1 { /* console */
- pinctrl-0 = <&pinctrl_uart1>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usbotg1 {
- adp-disable;
- disable-over-current;
- dr_mode = "otg";
- hnp-disable;
- srp-disable;
- usb-role-switch;
- samsung,picophy-dc-vol-level-adjust = <7>;
- samsung,picophy-pre-emp-curr-control = <3>;
- status = "okay";
-
- port {
-
- usb1_drd_sw: endpoint {
- remote-endpoint = <&typec1_dr_sw>;
- };
- };
-};
-
-&usbotg2 {
- disable-over-current;
- dr_mode = "host";
- samsung,picophy-dc-vol-level-adjust = <7>;
- samsung,picophy-pre-emp-curr-control = <3>;
- status = "okay";
-};
-
-&usdhc1 {
- bus-width = <8>;
- non-removable;
- pinctrl-0 = <&pinctrl_usdhc1>;
- pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- status = "okay";
-};
-
-&usdhc2 {
- bus-width = <4>;
- cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
- no-mmc;
- no-sdio;
- pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
- pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
- vmmc-supply = <®_usdhc2_vmmc>;
- status = "okay";
-};
-
-&wdog3 {
- status = "okay";
-};
-
-&iomuxc {
-
- pinctrl_eqos: eqosgrp {
- fsl,pins = <
- MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e
- MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e
- MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
- MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
- MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
- MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
- MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e
- MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
- MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e
- MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e
- MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e
- MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e
- MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
- MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
- >;
- };
-
- pinctrl_eqos_sleep: eqossleepgrp {
- fsl,pins = <
- MX93_PAD_ENET1_MDC__GPIO4_IO00 0x31e
- MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x31e
- MX93_PAD_ENET1_RD0__GPIO4_IO10 0x31e
- MX93_PAD_ENET1_RD1__GPIO4_IO11 0x31e
- MX93_PAD_ENET1_RD2__GPIO4_IO12 0x31e
- MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e
- MX93_PAD_ENET1_RXC__GPIO4_IO09 0x31e
- MX93_PAD_ENET1_RX_CTL__GPIO4_IO08 0x31e
- MX93_PAD_ENET1_TD0__GPIO4_IO05 0x31e
- MX93_PAD_ENET1_TD1__GPIO4_IO04 0x31e
- MX93_PAD_ENET1_TD2__GPIO4_IO03 0x31e
- MX93_PAD_ENET1_TD3__GPIO4_IO02 0x31e
- MX93_PAD_ENET1_TXC__GPIO4_IO07 0x31e
- MX93_PAD_ENET1_TX_CTL__GPIO4_IO06 0x31e
- >;
- };
-
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e
- MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e
- MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
- MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
- MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
- MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e
- MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x58e
- MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
- MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e
- MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e
- MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e
- MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e
- MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e
- MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e
- >;
- };
-
- pinctrl_fec_sleep: fecsleepgrp {
- fsl,pins = <
- MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e
- MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x51e
- MX93_PAD_ENET2_RD0__GPIO4_IO24 0x51e
- MX93_PAD_ENET2_RD1__GPIO4_IO25 0x51e
- MX93_PAD_ENET2_RD2__GPIO4_IO26 0x51e
- MX93_PAD_ENET2_RD3__GPIO4_IO27 0x51e
- MX93_PAD_ENET2_RXC__GPIO4_IO23 0x51e
- MX93_PAD_ENET2_RX_CTL__GPIO4_IO22 0x51e
- MX93_PAD_ENET2_TD0__GPIO4_IO19 0x51e
- MX93_PAD_ENET2_TD1__GPIO4_IO18 0x51e
- MX93_PAD_ENET2_TD2__GPIO4_IO17 0x51e
- MX93_PAD_ENET2_TD3__GPIO4_IO16 0x51e
- MX93_PAD_ENET2_TXC__GPIO4_IO21 0x51e
- MX93_PAD_ENET2_TX_CTL__GPIO4_IO20 0x51e
- >;
- };
-
- pinctrl_lpi2c2: lpi2c2grp {
- fsl,pins = <
- MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
- MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
- >;
- };
-
- pinctrl_lpi2c3: lpi2c3grp {
- fsl,pins = <
- MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
- MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
- >;
- };
-
- pinctrl_pcal6524: pcal6524grp {
- fsl,pins = <
- MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
- >;
- };
-
- pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
- fsl,pins = <
- MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
- MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582
- MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382
- MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382
- MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382
- MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382
- MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382
- MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382
- MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382
- MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382
- MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382
- MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
- fsl,pins = <
- MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e
- MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e
- MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e
- MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e
- MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e
- MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e
- MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e
- MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e
- MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e
- MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e
- MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
- fsl,pins = <
- MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
- MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe
- MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe
- MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe
- MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe
- MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe
- MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe
- MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe
- MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe
- MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe
- MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
- >;
- };
-
- pinctrl_usdhc2_gpio: usdhc2gpiogrp {
- fsl,pins = <
- MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
- >;
- };
-
- pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
- fsl,pins = <
- MX93_PAD_SD2_CD_B__GPIO3_IO00 0x51e
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582
- MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382
- MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382
- MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382
- MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382
- MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382
- MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
- fsl,pins = <
- MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e
- MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e
- MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
- MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
- MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e
- MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e
- MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
- >;
- };
-
- /* need to config the SION for data and cmd pad, refer to ERR052021 */
- pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
- fsl,pins = <
- MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe
- MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe
- MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe
- MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe
- MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe
- MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe
- MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
- >;
- };
-
- pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
- fsl,pins = <
- MX93_PAD_SD2_CLK__GPIO3_IO01 0x51e
- MX93_PAD_SD2_CMD__GPIO3_IO02 0x51e
- MX93_PAD_SD2_DATA0__GPIO3_IO03 0x51e
- MX93_PAD_SD2_DATA1__GPIO3_IO04 0x51e
- MX93_PAD_SD2_DATA2__GPIO3_IO05 0x51e
- MX93_PAD_SD2_DATA3__GPIO3_IO06 0x51e
- MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x51e
- >;
- };
-};
+#include <arm64/freescale/imx93-11x11-frdm.dts>
#include "imx93.dtsi"
--
2.47.3
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-07-29 13:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-07-29 13:47 [PATCH] ARM: boards: i.MX93: use kernel dts Fabian Pflug
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox