From: Stefan Kerkmann <s.kerkmann@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>,
"open list:BAREBOX" <barebox@lists.infradead.org>
Cc: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Subject: [PATCH v3 0/8] PBL: enable timeouts in read_poll_timeout macros
Date: Mon, 17 Aug 2026 16:01:11 +0200 [thread overview]
Message-ID: <20260817-feature-pbl-get-time-ns-v3-0-9874c1438855@pengutronix.de> (raw)
Without a time source the read_poll_timeout functions will deadlock in
the PBL if the break condition is never met. This series introduces the
necessary timing functions in the PBL for arches/socs implementing
PBL_CLOCKSOURCE, which is every ARMv8 SoC as they implement an
architected timer and selected ARMv7 SoCs.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
---
Changes in v3:
- Added PBL constructor support for ARM/ARM64/RISC-V
- Changed the implementation to PBL_CLOCKSOURCE
- Link to v2: https://patch.msgid.link/20260811-feature-pbl-get-time-ns-v2-0-754ee021b19d@pengutronix.de
Changes in v2:
- Strictly guard the pbl timer support on 32bit ARM for ARMv7 only builds
- Link to v1: https://lore.kernel.org/r/20250121-feature-pbl-get-time-ns-v1-0-c3d493397846@pengutronix.de
To: Sascha Hauer <s.hauer@pengutronix.de>
To: "open list:BAREBOX" <barebox@lists.infradead.org>
---
Stefan Kerkmann (8):
RISC-V: setup_c: avoid clearing BSS twice
ARM/ARM64/RISC-V: pbl: add constructor support
clocksource: allow re-init for same clock
drivers: arm_architected_timer: refactor for pbl compatibility
ARM: layerscape: re-init pbl clocksource
ARM: socfpga: agilex5: re-init pbl clocksource
ARM64: enable PBL_CLOCKSOURCE compatibility
linux/iopoll: enable polled timeouts for PBL_CLOCKSOURCE
arch/arm/cpu/setupc_32.S | 3 +++
arch/arm/cpu/setupc_64.S | 3 +++
.../include/asm/hardware/arm_architected_timer.h | 21 +++++++++++++++++++
arch/arm/lib/pbl.lds.S | 8 ++++++++
arch/arm/lib64/Makefile | 3 ++-
arch/arm/lib64/clocksource.c | 10 +++++++++
arch/arm/lib64/delay.c | 19 -----------------
arch/arm/mach-layerscape/lowlevel-ls1028a.c | 6 +++++-
arch/arm/mach-layerscape/lowlevel-ls1046a.c | 5 ++++-
arch/arm/mach-socfpga/agilex5-clock-manager.c | 7 +++----
arch/riscv/lib/pbl.lds.S | 9 ++++++++
arch/riscv/lib/setupc.S | 22 +++++++++++++++++++-
common/clock.c | 3 ++-
drivers/clocksource/Kconfig | 1 +
drivers/clocksource/Makefile | 2 +-
drivers/clocksource/arm_architected_timer.c | 24 ++++++++++++++--------
include/asm-generic/sections.h | 2 ++
include/linux/iopoll.h | 6 +++---
pbl/Makefile | 1 +
pbl/ctors.c | 13 ++++++++++++
20 files changed, 128 insertions(+), 40 deletions(-)
---
base-commit: 3317ac1baff3b0226caba7f83f3da61bc407343a
change-id: 20250121-feature-pbl-get-time-ns-6d9e8874d582
Best regards,
--
Stefan Kerkmann <s.kerkmann@pengutronix.de>
next reply other threads:[~2026-08-17 14:06 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-17 14:01 Stefan Kerkmann [this message]
2026-08-17 14:01 ` [PATCH v3 1/8] RISC-V: setup_c: avoid clearing BSS twice Stefan Kerkmann
2026-08-17 14:01 ` [PATCH v3 2/8] ARM/ARM64/RISC-V: pbl: add constructor support Stefan Kerkmann
2026-08-18 12:08 ` [PATCH] amend! " Stefan Kerkmann
2026-08-19 9:39 ` [PATCH v3 2/8] " Sascha Hauer
2026-08-17 14:01 ` [PATCH v3 3/8] clocksource: allow re-init for same clock Stefan Kerkmann
2026-08-17 14:01 ` [PATCH v3 4/8] drivers: arm_architected_timer: refactor for pbl compatibility Stefan Kerkmann
2026-08-20 7:04 ` Sascha Hauer
2026-08-20 7:32 ` Stefan Kerkmann
2026-08-20 8:00 ` Sascha Hauer
2026-08-20 8:07 ` Stefan Kerkmann
2026-08-17 14:01 ` [PATCH v3 5/8] ARM: layerscape: re-init pbl clocksource Stefan Kerkmann
2026-08-17 15:42 ` Ahmad Fatoum
2026-08-20 6:59 ` Sascha Hauer
2026-08-20 8:06 ` Stefan Kerkmann
2026-08-17 14:01 ` [PATCH v3 6/8] ARM: socfpga: agilex5: " Stefan Kerkmann
2026-08-17 14:01 ` [PATCH v3 7/8] ARM64: enable PBL_CLOCKSOURCE compatibility Stefan Kerkmann
2026-08-17 14:01 ` [PATCH v3 8/8] linux/iopoll: enable polled timeouts for PBL_CLOCKSOURCE Stefan Kerkmann
2026-08-19 7:03 ` [PATCH v3 0/8] PBL: enable timeouts in read_poll_timeout macros Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260817-feature-pbl-get-time-ns-v3-0-9874c1438855@pengutronix.de \
--to=s.kerkmann@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox